tel : +44 118 979 1238 fax : +44 118 979 1283 email: info@actcrystals.com in keeping with our ongoing policy of product evolvement and im provement, the above specification is subject to change without notice. iso9001: 2000 registered for quotations or further info rmation please contact us at: 3 the business centre, molly millars lane, wokingham, berks, rg41 2ey, uk http://www.actcrystals.com the ACTF9002/915.0/dcc6 is a low-loss, compact, and economical surface-acoustic-wave ( saw ) rf filter in a surface-mount ceramic dcc6 case for mobile communications ism900 systems. it provides low insertion loss and high attenuation. 1.package dimension (dcc6) 2.marking laser marking 3.test circuit pin configuration 2 input 5 output 1,3,4,6 ground sign data (unit: mm) sign data (unit: mm) a 1.9 e 1.2 b 0.64 f 3.8 c 1.0 g 3.8 d 1.27 issue : 2 c1u date : sept 06
tel : +44 118 979 1238 fax : +44 118 979 1283 email: info@actcrystals.com in keeping with our ongoing policy of product evolvement and im provement, the above specification is subject to change without notice. iso9001: 2000 registered for quotations or further info rmation please contact us at: 3 the business centre, molly millars lane, wokingham, berks, rg41 2ey, uk http://www.actcrystals.com 4. frequency characteristics 5.performance 5-1.maximum ratings rating value units input power level 10 dbm dc voltage 12v v dc storage temperature -40 to +85 c operating temperature -40 to +85 c soldering temperature +235 c issue : 2 c1u date : sept 06
tel : +44 118 979 1238 fax : +44 118 979 1283 email: info@actcrystals.com in keeping with our ongoing policy of product evolvement and im provement, the above specification is subject to change without notice. iso9001: 2000 registered for quotations or further info rmation please contact us at: 3 the business centre, molly millars lane, wokingham, berks, rg41 2ey, uk http://www.actcrystals.com 5-2.electronic characteristics characteristic minimum typical maximum units nominal centre frequency f c -- 915.000 -- mhz usable pass bandwidth bw -- 26 -- mhz insertion loss il 902.00 ?. 928.00 mhz -- 3.5 5.0 db inband ripple 902.00 ?. 928.00 mhz -- 1.5 -- db absolute attenuation dc ?. 800.00 mhz 800.00 ?. 880.00 mhz 950.00 ?. 1080.0 mhz 1080.0 ?. 2000.0 mhz 25 30 30 20 27 35 40 25 -- -- -- -- db db db db l caution: electrostatic sensitive device. observe precautions for handling! 1. the frequency f c is defined as the midpoint between the 3db frequencies. 2. unless noted otherwise, all measurements are made with th e filter installed in the spec ified test fixture that is connected to a 50 ? test system with vswr 1.2:1. the test fixture l and c are adjusted for minimum insertion loss at the filter centre frequency, f c . note that insertion loss, bandwidth, and passband shape are dependent on the impedance matching component values and quality. 3. unless noted otherwise, specifications apply over the entire specified operating temperature range. 4. the specifications of this device are based on the test circuit shown above and subject to change or obsolescence without notice. 5. all equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale. 6. our liability is only assumed for the surface acoustic wave (saw) component(s) per se, not for applications, processes and circuits implemented wi thin components or assemblies. issue : 2 c1u date : sept 06
|
