ap9971agh/j-hf advanced power n-channel enhancement mode electronics corp. power mosfet simple drive requirement bv dss 60v lower on-resistance r ds(on) 36m fast switching characteristic i d 22a halogen free & rohs compliant description absolute maximum ratings@t j =25 o c(unless otherwise specified) symbol units v ds v v gs v i d @t c =25 a i d @t c =100 a i dm a p d @t c =25 w t stg t j symbol value units rthj-c maximum thermal resistance, junction-case 3.6 /w rthj-a 62.5 /w rthj-a maixmum thermal resistance, junction-ambient 110 /w data and specifications subject to change without notice thermal data parameter storage temperature range total power dissipation 34.7 -55 to 150 operating junction temperature range -55 to 150 drain current, v gs @ 10v 14 pulsed drain current 1 80 60 gate-source voltage + 20 drain current, v gs @ 10v 22 halogen-free product 201501263 1 maximum thermal resistance, junction-ambient (pcb mount) 3 parameter rating drain-source voltage g d s g d s to-251(j) g d s to-252(h) a p9971a series are from advanced power innovated design and silicon process technology to achieve the lowest possible on-resistance and fast switching performance. it provides the designer with an extreme efficient device for use in a wide range of power applications. the to-252 package is widely preferred for all commercial-industrial surface mount applications using infrared reflow technique and suited fo r high current application due to the low connection resistance. the through-hole version (ap9971agj) are available for low-profile applications.
ap9971agh/j-hf electrical characteristics@t j =25 o c(unless otherwise specified) symbol parameter test conditions min. typ. max. units bv dss drain-source breakdown voltage v gs =0v, i d =1ma 60 - - v r ds(on) static drain-source on-resistance 2 v gs =10v, i d =15a - - 36 m ? v gs =6v, i d =10a - - 50 m ? v gs(th) gate threshold voltage v ds =v gs , i d =250ua 1 - 3 v g fs forward transconductance v ds =10v, i d =15a - 12.4 - s i dss drain-source leakage current v ds =60v, v gs =0v - - 10 ua i gss gate-source leakage v gs = + 20v, v ds =0v - - + 100 na q g total gate charge i d =15a - 17 27 nc q gs gate-source charge v ds =48v - 2.5 - nc q gd gate-drain ("miller") charge v gs =10v - 6.4 - nc t d(on) turn-on delay time v ds =30v - 6.6 - ns t r rise time i d =15a - 22 - ns t d(off) turn-off delay time r g =3.3 -17- ns t f fall time v gs =10v - 4.3 - ns c iss input capacitance v gs =0v - 625 1000 pf c oss output capacitance v ds =25v - 90 - pf c rss reverse transfer capacitance f=1.0mhz - 65 - pf source-drain diode symbol parameter test conditions min. typ. max. units v sd forward on voltage 2 i s =15a, v gs =0v - - 1.3 v t rr reverse recovery time i s =15a, v gs =0v - 27 - ns q rr reverse recovery charge di/dt=100a/s - 26 - nc notes: 1.pulse width limited by max. junction temperature. 2.pulse test this product is sensitive to electrostatic discharge, please handle with caution. use of this product as a critical component in life support or other similar systems is not authorized. apec does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. apec reserves the right to make changes without further notice to any products herein to improve reliability, function or design. 2 3.surface mounted on 1 in 2 copper pad of fr4 board
a p9971agh/j-h f fig 1. typical output characteristics fig 2. typical output characteristics fig 3. on-resistance v.s. gate voltage fig 4. normalized on-resistance v.s. junction temperature fig 5. forward characteristic of fig 6. gate threshold voltage v.s. reverse diode junction temperature 3 0 20 40 60 80 02468 v ds , drain-to-source voltage (v) i d , drain current (a) t c =25 o c 10 v 7.0v 5.0 v 4.5 v v g = 4 .0v 0 10 20 30 40 50 02468 v ds , drain-to-source voltage (v) i d , drain current (a) t c = 150 o c 10 v 7.0v 5.0 v 4.5 v v g = 4.0 v 0.4 0.8 1.2 1.6 2.0 -50 0 50 100 150 t j , junction temperature ( o c) normalized r ds(on) i d =15a v g =10v 0 4 8 12 16 20 0 0.2 0.4 0.6 0.8 1 1.2 1.4 v sd , source-to-drain voltage (v) i s (a) t j =25 o c t j =150 o c 20 30 40 50 246810 v gs gate-to-source voltage (v) r ds(on) (m ) i d =10a t c =25 o c 0.5 0.7 0.9 1.1 1.3 1.5 -50 0 50 100 150 t j , junction temperature ( o c) normalized v gs(th)
ap9971agh/j-h f fig 7. gate charge characteristics fig 8. typical capacitance characteristics fig 9. maximum safe operating area fig 10. effective transient thermal impedance fig 11. switching time waveform fig 12. gate charge waveform 4 0 2 4 6 8 10 12 048121620 q g , total gate charge (nc) v gs , gate to source voltage (v) v ds =30v v ds =36v v ds =48v i d =15a q v g 10v q gs q gd q g charge 10 100 1000 1 5 9 1317212529 v ds ,drain-to-source voltage (v) c (pf) f =1.0mh z c iss c oss c rss 0.01 0.1 1 0.00001 0.0001 0.001 0.01 0.1 1 t , pulse width (s) normalized thermal response (r thjc ) p dm duty factor = t/t peak t j = p dm x r thjc + t c t t 0.02 0.01 0.05 0.1 0.2 duty factor=0.5 single pulse 0.1 1 10 100 0.1 1 10 100 1000 v ds , drain-to-source voltage (v) i d (a) t c =25 o c s in g le puls e 100us 1ms 10ms 100ms dc t d(on) t r t d(off) t f v ds v gs 10% 90%
ap9971agh/j-hf marking information to-251 to-252 5 part numbe r package code meet rohs requirement for low voltage mosfet only 9971agj ywwsss date code (ywwsss) y last digit of the year ww week sss sequence part numbe r package code date code (ywwsss) y last digit of the year ww week sss sequence 9971agh ywwsss meet rohs requirement for low voltage mosfet only
|
