View XMLEZW-00-0000-0B0HT427F_8849759.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

cld-ds38 rev 8d cree ? xlamp ? xm-l easywhite ? leds pro duc t d escrip tion the xlamp ? xm-l easywhite ? ( e zw) le d eliminates chromaticity binning, and enables luminaire and bulb manufacturers to deliver the consistent color and high effcacy light output of a multi?die led in the compact xm-l footprint. xlamp xm -l e asywhite le ds can reduce led- to-led color variation to within a 2 - step macadam ellipse, 94% smaller than the total area of the corresponding ansi c78.377 color region. the xlamp xm-l e asywhite le d is the perfect choice for lighting applications where moderate to high luminous fux output is required from a single, small point source. example applications include: led retroft bulbs, commercial/ retail display spotlights, and other indoor general-illumination applications. fea tures ? available in 4-step and 2-step easywhite bins at 2700?k, 3000?k, 3500?k, 4000?k, 5000?k cct ? wide range of operating current?C?up to 2?a @ 6?v ? 85?c binning and characterization ? available in 6?v and 12?v versions ? low thermal resistance: 2.5?c/w ? wide viewing angle: 115 ? wide variety of cri choices: standard cri as well as 80-, 85-, 90-minimum cri ? e lectrically neutral thermal path ? unlimited foor life at ?30?oc/85% rh ? refow solderable ? jedec j?std?020c ? rohs and re ach compliant ? ul ? recognized component (e349212) ta ble o f cont e nts characteristics ........................................... 2 flux characteristics, standard order codes and bins, 6? volt xm?l ezw ............ 3 flux characteristics, standard order codes and bins, 12? volt xm?l ezw .......... 6 relative spectral power distribution ........ 9 relative flux vs. junction temperature .... 9 e lectrical characteristics ......................... 10 relative flux vs. current .......................... 11 relative chromaticity vs. current and temperature ............................................. 12 typical spatial distribution ...................... 13 thermal design ........................................ 13 performance groups C brightness ......... 14 performance groups C chromaticity ...... 14 cree easywhite ? bins plotted on the 1931 cie color space .............................. 15 cree ansi white bins plotted on the 1931 cie color space .............................. 16 bin and order code formats ................... 16 refow soldering characteristics ............ 17 notes ........................................................ 18 mechanical dimensions .......................... 20 tape and reel ........................................... 21 packaging ................................................. 22 product family data sheet copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 www . cree . c om/x lamp
2 ch ar ac teristics characteristics unit minimum t ypical maximum thermal resistance, junction to solder point c/w 2.5 viewing angle (fwhm) degrees 115 temperature coeffcient of voltage (6?v) mv/c ?6.0 temperature coeffcient of voltage (12?v) mv/c ?12.0 e sd withstand voltage (hbm per mil-std-883d) v 8000 dc forward current (6?v) ma 2000 dc forward current (12?v) ma 1000 reverse current (6?v, 12?v) ma ?0.1 forward voltage (@ 700?ma, 85?c, 6?v) v 5.7 7.0 forward voltage (@ 350?ma, 85?c, 12?v) v 11.5 14.0 le d junction temperature c 150 copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xm -l easywhit e ? led
notes ? cree maintains a tolerance of 7% on fux and power measurements, 0.005 on chromaticity (ccx, ccy) measurements and 2 on cri measurements. see the measurements section (page 18). ? for standard cri parts, typical cri is 80 for 4000 C 3500?k cct parts and 82 for 3000 C 2700?k cct parts. * flux values @ 25?c are calculated and for reference only. 3 flux chara c teristic s, s tandard order co des and bins, 6-v o lt x m- l e zw (700? m a, t j = 85?c) the following table provides the order codes for 6 ? volt xlamp xm?l ezw leds. color cc t range minimum luminous flux @?700?ma 2-step 4-step group flux (lm) @ 85?c flux (lm) @ 25?c* chromaticity region o rder code chromaticity region o rder code standard cri easywhite 5000 k u4 340 404 50h xmle zw-00-0000-0b00u450h 50f xmle zw-00-0000-0b00u450f u5 360 427 xmle zw-00-0000-0b00u550h xmle zw-00-0000-0b00u550f u6 380 451 xmlezw ?00?0000?0b00u650h xmlezw ?00?0000?0b00u650f v2 400 475 xmle zw-00-0000-0b00v250h xmle zw-00-0000-0b00v250f 4000 k u2 300 356 40h xmle zw-00-0000-0b00u240h 40f xmle zw-00-0000-0b00u240f u3 320 380 xmle zw-00-0000-0b00u340h xmle zw-00-0000-0b00u340f u4 340 404 xmle zw-00-0000-0b00u440h xmle zw-00-0000-0b00u440f 3500 k t6 280 332 35h xmlezw ?00?0000?0b00t635h 35f xmlezw ?00?0000?0b00t635f u2 300 356 xmle zw-00-0000-0b00u235h xmle zw-00-0000-0b00u235f u3 320 380 xmle zw-00-0000-0b00u335h xmle zw-00-0000-0b00u335f 3000 k t5 260 309 30h xmle zw-00-0000-0b00t530h 30f xmle zw-00-0000-0b00t530f t6 280 332 xmlezw ?00?0000?0b00t630h xmlezw ?00?0000?0b00t630f u2 300 356 xmle zw-00-0000-0b00u230h xmle zw-00-0000-0b00u230f u3 320 380 xmle zw-00-0000-0b00u330h xmle zw-00-0000-0b00u330f 2700 k t4 240 285 27h xmle zw-00-0000-0b00t427h 27f xmle zw-00-0000-0b00t427f t5 260 309 xmle zw-00-0000-0b00t527h xmle zw-00-0000-0b00t527f t6 280 332 xmlezw ?00?0000?0b00t627h xmlezw ?00?0000?0b00t627f u2 300 356 xmle zw-00-0000-0b00u227h xmle zw-00-0000-0b00u227f copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xm -l easywhit e ? led
notes ? cree maintains a tolerance of 7% on fux and power measurements, 0.005 on chromaticity (ccx, ccy) measurements and 2 on cri measurements. see the measurements section (page 18). ? for standard cri parts, typical cri is 80 for 4000 C 3500?k cct parts and 82 for 3000 C 2700?k cct parts. * flux values @ 25?c are calculated and for reference only. 4 color cc t range minimum luminous flux @?700?ma 2-step 4-step group flux (lm) @ 85?c flux (lm) @ 25?c* chromaticity region o rder code chromaticity region o rder code 80-cri minimum easywhite 4000?k t6 280 332 40h xmlezw ?00?0000? 0b0ht640h 40f xmlezw ?00?0000? 0b0ht640f u2 300 356 xmle zw-00-0000-0b0hu240h xmle zw-00-0000-0b0hu240f u3 320 380 xmle zw-00-0000-0b0hu340h xmle zw-00-0000-0b0hu340f u4 340 404 xmle zw-00-0000-0b0hu440h xmle zw-00-0000-0b0hu440f 3500?k t5 260 309 35h xmle zw-00-0000-0b0ht535h 35f xmle zw-00-0000-0b0ht535f t6 280 332 xmlezw ?00?0000? 0b0ht635h xmlezw ?00?0000? 0b0ht635f u2 300 356 xmle zw-00-0000-0b0hu235h xmle zw-00-0000-0b0hu235f u3 320 380 xmle zw-00-0000-0b0hu335h xmle zw-00-0000-0b0hu335f 3000?k t5 260 309 30h xmle zw-00-0000-0b0ht530h 30f xmle zw-00-0000-0b0ht530f t6 280 332 xmlezw ?00?0000? 0b0ht630h xmlezw ?00?0000? 0b0ht630f u2 300 356 xmle zw-00-0000-0b0hu230h xmle zw-00-0000-0b0hu230f u3 320 380 xmle zw-00-0000-0b0hu330h xmle zw-00-0000-0b0hu330f 2700?k t4 240 285 27h xmle zw-00-0000-0b0ht427h 27f xmle zw-00-0000-0b0ht427f t5 260 309 xmle zw-00-0000-0b0ht527h xmle zw-00-0000-0b0ht527f t6 280 332 xmlezw ?00?0000? 0b0ht627h xmlezw ?00?0000? 0b0ht627f u2 300 356 xmle zw-00-0000-0b0hu227h xmle zw-00-0000-0b0hu227f 85-cri minimum easywhite 3000?k t3 220 261 30h xmle zw-00-0000-0b0pt330h 30f xmle zw-00-0000-0b0pt330f t4 240 285 xmle zw-00-0000-0b0pt430h xmle zw-00-0000-0b0pt430f t5 260 309 xmle zw-00-0000-0b0pt530h xmle zw-00-0000-0b0pt530f t6 280 332 xmlezw ?00?0000?0b0pt630h xmlezw ?00?0000?0b0pt630f 2700?k t2 200 237 27h xmle zw-00-0000-0b0pt227h 27f xmle zw-00-0000-0b0pt227f t3 220 261 xmle zw-00-0000-0b0pt327h xmle zw-00-0000-0b0pt327f t4 240 285 xmle zw-00-0000-0b0pt427h xmle zw-00-0000-0b0pt427f t5 260 309 xmle zw-00-0000-0b0pt527h xmle zw-00-0000-0b0pt527f flux chara c teristic s, s tandard order co des and bins, 6-v o lt x m- l e zw (700? m a, t j = 85?c) - continu ed copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xm -l easywhit e ? led
notes ? cree maintains a tolerance of 7% on fux and power measurements, 0.005 on chromaticity (ccx, ccy) measurements and 2 on cri measurements. see the measurements section (page 18). ? for standard cri parts, typical cri is 80 for 4000 C 3500?k cct parts and 82 for 3000 C 2700?k cct parts. * flux values @ 25?c are calculated and for reference only. 5 color cc t range minimum luminous flux @?700?ma 2-step 4-step group flux (lm) @ 85?c flux (lm) @ 25?c* chromaticity region o rder code chromaticity region o rder code 90-cri minimum easywhite 3000?k t2 200 237 30h xmle zw-00-0000-0b0ut230h 30f xmle zw-00-0000-0b0ut230f t3 220 261 xmle zw-00-0000-0b0ut330h xmle zw-00-0000-0b0ut330f t4 240 285 xmle zw-00-0000-0b0ut430h xmle zw-00-0000-0b0ut430f t5 260 309 xmle zw-00-0000-0b0ut530h xmle zw-00-0000-0b0ut530f 2700?k s6 180 214 27h xmlezw ?00?0000?0b0us627h 27f xmlezw ?00?0000?0b0us627f t2 200 237 xmle zw-00-0000-0b0ut227h xmle zw-00-0000-0b0ut227f t3 220 261 xmle zw-00-0000-0b0ut327h xmle zw-00-0000-0b0ut327f t4 240 285 xmle zw-00-0000-0b0ut427h xmle zw-00-0000-0b0ut427f color cc t range minimum luminous flux @ 700?ma chromaticity regions o rder code group flux (lm) @ 85?c flux (lm) @ 25?c* ansi white 5000 k u4 340 404 0e3 xmle zw-00-0000-0b00u40e3 u5 360 427 xmle zw-00-0000-0b00u50e3 u6 380 451 xmlezw ?00?0000?0b00u60e3 v2 400 475 xmle zw-00-0000-0b00v20e3 flux chara c teristic s, s tandard order co des and bins, 6-v o lt x m- l e zw (700? m a, t j = 85?c) - continu ed copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xm -l easywhit e ? led
notes ? cree maintains a tolerance of 7% on fux and power measurements, 0.005 on chromaticity (ccx, ccy) measurements and 2 on cri measurements. see the measurements section (page 18). ? for standard cri parts, typical cri is 80 for 4000 C 3500?k cct parts and 82 for 3000 C 2700?k cct parts. * flux values @ 25?c are calculated and for reference only. 6 flux chara c teristic s, s tandard order co des and bins, 12-v o lt x m- l e zw (350? m a , t j = 85?c) the following table provides the order codes for 12 ? volt xlamp xm?l ezw leds. color cc t range minimum luminous flux @?350?ma 2-step 4-step group flux (lm) @ 85?c flux (lm) @ 25?c* chromaticity region o rder code chromaticity region o rder code standard cri easywhite 5000 k u4 340 404 50h xmle zw-00-0000-0d00u450h 50f xmle zw-00-0000-0d00u450f u5 360 427 xmle zw-00-0000-0d00u550h xmle zw-00-0000-0d00u550f u6 380 451 xmlezw ?00?0000?0d00u650h xmlezw ?00?0000?0d00u650f v2 400 475 xmle zw-00-0000-0d00v250h xmle zw-00-0000-0d00v250f 4000 k u2 300 356 40h xmle zw-00-0000-0d00u240h 40f xmle zw-00-0000-0d00u240f u3 320 380 xmle zw-00-0000-0d00u340h xmle zw-00-0000-0d00u340f u4 340 404 xmle zw-00-0000-0d00u440h xmle zw-00-0000-0d00u440f 3500 k t6 280 332 35h xmlezw ?00?0000?0d00t635h 35f xmlezw ?00?0000?0d00t635f u2 300 356 xmle zw-00-0000-0d00u235h xmle zw-00-0000-0d00u235f u3 320 380 xmle zw-00-0000-0d00u335h xmle zw-00-0000-0d00u335f 3000 k t5 260 309 30h xmle zw-00-0000-0d00t530h 30f xmle zw-00-0000-0d00t530f t6 280 332 xmlezw ?00?0000?0d00t630h xmlezw ?00?0000?0d00t630f u2 300 356 xmle zw-00-0000-0d00u230h xmle zw-00-0000-0d00u230f u3 320 380 xmle zw-00-0000-0d00u330h xmle zw-00-0000-0d00u330f 2700 k t4 240 285 27h xmle zw-00-0000-0d00t427h 27f xmle zw-00-0000-0d00t427f t5 260 309 xmle zw-00-0000-0d00t527h xmle zw-00-0000-0d00t527f t6 280 332 xmlezw ?00?0000?0d00t627h xmlezw ?00?0000?0d00t627f u2 300 356 xmle zw-00-0000-0d00u227h xmle zw-00-0000-0d00u227f copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xm -l easywhit e ? led
notes ? cree maintains a tolerance of 7% on fux and power measurements, 0.005 on chromaticity (ccx, ccy) measurements and 2 on cri measurements. see the measurements section (page 18). ? for standard cri parts, typical cri is 80 for 4000 C 3500?k cct parts and 82 for 3000 C 2700?k cct parts. * flux values @ 25?c are calculated and for reference only. 7 color cc t range minimum luminous flux @?350?ma 2-step 4-step group flux (lm) @ 85?c flux (lm) @ 25?c* chromaticity region o rder code chromaticity region o rder code 80-cri minimum easywhite 4000?k t6 280 332 40h xmlezw ?00?0000? 0d0ht640h 40f xmlezw ?00?0000? 0d0ht640f u2 300 356 xmle zw-00-0000-0d0hu240h xmle zw-00-0000-0d0hu240f u3 320 380 xmle zw-00-0000-0d0hu340h xmle zw-00-0000-0d0hu340f u4 340 404 xmle zw-00-0000-0d0hu440h xmle zw-00-0000-0d0hu440f 3500?k t5 260 309 35h xmle zw-00-0000-0d0ht535h 35f xmle zw-00-0000-0d0ht535f t6 280 332 xmlezw ?00?0000? 0d0ht635h xmlezw ?00?0000? 0d0ht635f u2 300 356 xmle zw-00-0000-0d0hu235h xmle zw-00-0000-0d0hu235f u3 320 380 xmle zw-00-0000-0d0hu335h xmle zw-00-0000-0d0hu335f 3000?k t5 260 309 30h xmle zw-00-0000-0d0ht530h 30f xmle zw-00-0000-0d0ht530f t6 280 332 xmlezw ?00?0000? 0d0ht630h xmlezw ?00?0000? 0d0ht630f u2 300 356 xmle zw-00-0000-0d0hu230h xmle zw-00-0000-0d0hu230f u3 320 380 xmle zw-00-0000-0d0hu330h xmle zw-00-0000-0d0hu330f 2700?k t4 240 285 27h xmle zw-00-0000-0d0ht427h 27f xmle zw-00-0000-0d0ht427f t5 260 309 xmle zw-00-0000-0d0ht527h xmle zw-00-0000-0d0ht527f t6 280 332 xmlezw ?00?0000? 0d0ht627h xmlezw ?00?0000? 0d0ht627f u2 300 356 xmle zw-00-0000-0d0hu227h xmle zw-00-0000-0d0hu227f 85-cri minimum easywhite 3000?k t3 220 261 30h xmle zw-00-0000-0d0pt330h 30f xmle zw-00-0000-0d0pt330f t4 240 285 xmle zw-00-0000-0d0pt430h xmle zw-00-0000-0d0pt430f t5 260 309 xmle zw-00-0000-0d0pt530h xmle zw-00-0000-0d0pt530f t6 280 332 xmlezw ?00?0000?0d0pt630h xmlezw ?00?0000?0d0pt630f 2700?k t2 200 237 27h xmle zw-00-0000-0d0pt227h 27f xmle zw-00-0000-0d0pt227f t3 220 261 xmle zw-00-0000-0d0pt327h xmle zw-00-0000-0d0pt327f t4 240 285 xmle zw-00-0000-0d0pt427h xmle zw-00-0000-0d0pt427f t5 260 309 xmle zw-00-0000-0d0pt527h xmle zw-00-0000-0d0pt527f flux chara c teristic s, s tandard order co des and bins, 12-v o lt x m- l e zw (350? m a , t j = 85?c) - continu ed copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xm -l easywhit e ? led
notes ? cree maintains a tolerance of 7% on fux and power measurements, 0.005 on chromaticity (ccx, ccy) measurements and 2 on cri measurements. see the measurements section (page 18). ? for standard cri parts, typical cri is 80 for 4000 C 3500?k cct parts and 82 for 3000 C 2700?k cct parts. * flux values @ 25?c are calculated and for reference only. 8 color cc t range minimum luminous flux @?350?ma 2-step 4-step group flux (lm) @ 85?c flux (lm) @ 25?c* chromaticity region o rder code chromaticity region o rder code 90-cri minimum easywhite 3000?k t2 200 237 30h xmle zw-00-0000-0d0ut230h 30f xmle zw-00-0000-0d0ut230f t3 220 261 xmle zw-00-0000-0d0ut330h xmle zw-00-0000-0d0ut330f t4 240 285 xmle zw-00-0000-0d0ut430h xmle zw-00-0000-0d0ut430f t5 260 309 xmle zw-00-0000-0d0ut530h xmle zw-00-0000-0d0ut530f 2700?k s6 180 214 27h xmlezw ?00?0000?0d0us627h 27f xmlezw ?00?0000?0d0us627f t2 200 237 xmle zw-00-0000-0d0ut227h xmle zw-00-0000-0d0ut227f t3 220 261 xmle zw-00-0000-0d0ut327h xmle zw-00-0000-0d0ut327f t4 240 285 xmle zw-00-0000-0d0ut427h xmle zw-00-0000-0d0ut427f color cc t range minimum luminous flux @ 350?ma chromaticity regions o rder code group flux (lm) @ 85?c flux (lm) @ 25?c* ansi white 5000 k u4 340 404 0e3 xmle zw-00-0000-0d00u40e3 u5 360 427 xmle zw-00-0000-0d00u50e3 u6 380 451 xmlezw ?00?0000?0d00u60e3 v2 400 475 xmle zw-00-0000-0d00v20e3 flux chara c teristic s, s tandard order co des and bins, 12-v o lt x m- l e zw (350? m a , t j = 85?c) - continu ed copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xm -l easywhit e ? led
9 rela tive spec tral po we r distribution rela tive fl ux vs. junc tion tempera ture (6- v - i f = 700? m a; 12- v - i f = 350? m a ) relative spectral power 0 20 40 60 80 100 380 430 480 530 580 630 680 730 780 relative radiant power (%) wavelength (nm) 5000 k cct 3000 k cct relative flux output vs. junction temperature 0% 20% 40% 60% 80% 100% 120% 25 50 75 100 125 150 relative luminous flux junction temperature (oc) copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xm -l easywhit e ? led
10 elec trical ch ar ac teristic s ( t j = 85?c) electrical characteristics (tj = 85oc) 0 250 500 750 1000 1250 1500 1750 2000 5.2 5.4 5.6 5.8 6.0 6.2 6.4 forward current (ma) forward voltage (v) 6 v 0 250 500 750 1000 10.0 10.5 11.0 11.5 12.0 12.5 13.0 forward current (ma) forward voltage (v) 12 v copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xm -l easywhit e ? led
11 rela tive fl ux vs. curr e nt ( t j = 85c) lf vs. i @ 85 0% 25% 50% 75% 100% 125% 150% 175% 200% 225% 0 250 500 750 1000 1250 1500 1750 2000 relative luminous flux forward current (ma) 6 v not used and not roboto 0% 25% 50% 75% 100% 125% 150% 175% 200% 225% 0 200 400 600 800 1000 relative luminous flux forward current (ma) 12 v copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xm -l easywhit e ? led
12 rela tive chro ma tic ity vs. curre nt and tempera ture xlamp xm-l ezw led, 6- v xlamp xm-l ezw led, 12- v xlamp xm-l ezw led, 6- v , 12v xm-l ezw 6v xm-l ezw 12v - 0.020 - 0.015 - 0.010 - 0.005 0.000 0.005 0.010 0.015 0.020 0 400 800 1200 1600 2000 current (ma) ccx ccy - 0.020 - 0.015 - 0.010 - 0.005 0.000 0.005 0.010 0.015 0.020 0 200 400 600 800 1000 current (ma) ccx ccy xm-l ezw 6v xm-l ezw 12v - 0.020 - 0.015 - 0.010 - 0.005 0.000 0.005 0.010 0.015 0.020 0 400 800 1200 1600 2000 current (ma) ccx ccy - 0.020 - 0.015 - 0.010 - 0.005 0.000 0.005 0.010 0.015 0.020 0 200 400 600 800 1000 current (ma) ccx ccy xm-l ezw, 6v, 12v - 0.020 - 0.015 - 0.010 - 0.005 0.000 0.005 0.010 0.015 0.020 25 50 75 100 125 150 tsp ( c) ccx ccy copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xm -l easywhit e ? led
13 t ypical spa ti al distribution ther mal design the maximum forward current is determined by the thermal resistance between the led junction and ambient. it is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics. xlamp xm-l ezw led, 6- v xlamp xm-l ezw led, 12- v typical spatial radiation pattern 0 20 40 60 80 100 - 90 - 70 - 50 - 30 - 10 10 30 50 70 90 relative luminous intensity (%) angle (o) thermal design (6v) from xml ds 0 500 1000 1500 2000 2500 0 20 40 60 80 100 120 140 160 maximum current (ma) ambient temperature (oc) rj - a = 4 c/w rj - a = 7 c/w rj - a = 10 c/w rj - a = 15 c/w thermal design (12v) from xml ds 0 200 400 600 800 1000 1200 0 20 40 60 80 100 120 140 160 maximum current (ma) ambient temperature (oc) rj - a = 4 c/w rj - a = 7 c/w rj - a = 10 c/w rj - a = 15 c/w copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xm -l easywhit e ? led
14 perf or mance grou p s C brig htne ss ( t j = 85?c) xlamp xm? l easywhite leds are tested for luminous fux and placed into one the following bins. group code minimum luminous flux @ 700?ma, 6?v (@?350?ma ?, 12?v) maximum luminous flux @ 700?ma, 6?v (@?350?ma , 12?v) s6 180 200 t2 200 220 t3 220 240 t4 240 260 t5 260 280 t6 280 300 u2 300 320 u3 320 340 u4 340 360 u5 360 380 u6 380 400 v2 400 420 perf or mance grou p s C chro ma tic ity ( t j = 85?c) xlamp xm ? l easywhite leds are tested for chromaticity and placed into one of the regions defned by the following bounding coordinates. easywhite color t emperatures C 4- step code cc t x y 50f 5000 k 0.3407 0.3459 0.3415 0.3586 0.3499 0.3654 0.3484 0.3521 40f 4000 k 0.3744 0.3685 0.3782 0.3837 0.3912 0.3917 0.3863 0.3758 35f 3500 k 0.3981 0.3800 0.4040 0.3966 0.4186 0.4037 0.4116 0.3865 30f 3000 k 0.4242 0.3919 0.4322 0.4096 0.4449 0.4141 0.4359 0.3960 27f 2700 k 0.4475 0.3994 0.4573 0.4178 0.4695 0.4207 0.4589 0.4021 easywhite color t emperatures C 2- step code cc t x y 50h 5000 k 0.3429 0.3507 0.3434 0.3571 0.3475 0.3604 0.3469 0.3539 40h 4000 k 0.3784 0.3741 0.3804 0.3818 0.3867 0.3857 0.3844 0.3778 35h 3500 k 0.4030 0.3857 0.4061 0.3941 0.4132 0.3976 0.4099 0.3890 30h 3000 k 0.4291 0.3973 0.4333 0.4062 0.4395 0.4084 0.4351 0.3994 27h 2700 k 0.4528 0.4046 0.4578 0.4138 0.4638 0.4152 0.4586 0.4060 copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xm -l easywhit e ? led
15 perf or mance grou p s C chro ma tic ity ( t j = 85?c) - c o ntinued cree ea sywhite ? b ins pl ott ed on th e 1931 c i e co l or space ( t j = 85?c) ansi white bins code cc t bin code x y 0e3 5000 k 3a0 .3371 .3490 .3451 .3554 .3440 .3427 .3366 .3369 3b0 .3376 .3616 .3463 .3687 .3451 .3554 .3371 .3490 3c0 .3463 .3687 .3551 .3760 .3533 .3620 .3451 .3554 3d0 .3451 .3554 .3533 .3620 .3515 .3487 .3440 .3427 2700 k 3000 k 3500 k 4000 k 4500 k 5000 k 5700 k 0 . 3 2 0.33 0.34 0 . 3 5 0 . 3 6 0.37 0.38 0 . 3 9 0 . 4 0 0.41 0 . 4 2 0 . 4 3 0 . 4 4 0.45 0. 32 0.33 0.34 0.35 0.36 0. 37 0.38 0. 39 0.40 0. 41 0.42 0.43 0. 44 0.45 0. 46 0.47 0. 48 0.49 ccy ccx ansi c78 . 37 7 q u a dr a ng le e a s y wh ite 4-step e a s y wh ite 2-step copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xm -l easywhit e ? led
16 cree ansi whit e b ins pl ott ed on th e 1931 c i e co l or space ( t j =85?c) b in and o rde r code for ma ts bin codes and order codes are confgured as follows: o rder code b in code 2600 k 2700 k 2900 k 3000 k 3200 k 3500 k 3700 k 4000 k 4300 k 4500 k 4750 k 5000 k 5300 k 3 a0 3 b 0 3 c 0 3d0 5 a0 5 b 0 5 c 0 5 d 0 6 a0 6 b0 6 c 0 6d0 7 a0 7 b0 7c 0 7 d 0 8 a0 8b0 8 c 0 8 d 0 0.32 0 .33 0 .34 0.35 0 .36 0 .37 0 .38 0.39 0 .40 0 .41 0 .42 0.43 0 .44 0 .45 0.32 0 .33 0.34 0 .35 0 .36 0 .37 0 .38 0.39 0 .40 0.41 0 .42 0.43 0 .44 0 .45 0 .46 0 .47 0.48 0 .49 ccy ccx a nsi c7 8. 3 77a 2600k 2700k 2900k 3000k 3200k 3500k 3700k 4000k 4300k 4500k 4750k 5000k 5300k 3a0 3b0 3c0 3d0 5a0 5b0 5c0 5d0 6a0 6b0 6c0 6d0 7a0 7b0 7c0 7d0 8a0 8b0 8c0 8d0 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.46 0.47 0.48 0.49 ccy ccx ansi c78.377a 2700k 3000k 3500k 4000k 4500k 5000k 5700k 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.46 0.47 0.48 0.49 ccy ccx ansi c78.377 quadrangle easywhite 4 - step easywhite 2 - step sssccc-b-www -fff-gaaaaaa series xml = xm-l internal code flux bi n internal code vf class b = 6-v class d = 12-v class chromaticity bin color ezw = easywhite sssccc-bb-hhhh-hgnnnnnnn series xml = xm-l internal code kit code vf class b = 6-v class d = 12-v class reel siz e 0 = 1000 (standar d) color ezw = easywhite copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xm -l easywhit e ? led
17 refl o w so ldering ch ar ac teristics in testing, cree has found xlamp xm ? l easywhite leds to be compatible with jedec j?std? 020c, using the parameters listed below. as a general guideline, cree recommends that users follow the recommended soldering profle provided by the manufacturer of the solder paste used. note that this general guideline may not apply to all pcb designs and confgurations of refow soldering equipment. profile feature lead-free solder average ramp-up rate (ts max to t p ) 1.2?c/second preheat: temperature min (ts min ) 120 c preheat: temperature max (ts max ) 170 c preheat: time (ts min to ts max ) 65?150 seconds time maintained above: temperature (t l ) 217 c time maintained above: time (t l ) 45-90 seconds peak/classifcation temperature (tp) 235 ? 245 c time within 5?c of actual peak temperature (tp) 20-40 seconds ramp-down rate 1 ? 6 c/second time 25?c to peak temperature 4 minutes max. note: all temperatures refer to the topside of the package, measured on the package body surface. t p t l temperature time t 25?c to peak preheat ts t s t p 25 ramp-down ramp-up critical zone t l to t p ts max ts min copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xm -l easywhit e ? led
18 n otes measurements the luminous fux, radiant power, chromaticity and cri measurements in this document are binning specifcations only and solely represent product measurements as of the date of shipment. these measurements will change over time based on a number of factors that are not within crees control and are not intended or provided as operational specifcations for the products. calculated values are provided for informational purposes only and are not intended as specifcations. pre -release qualifcation t esting please read the led reliability overview for details of the qualifcation process cree applies to ensure long ? term reliability for xlamp leds and details of crees pre ? release qualifcation testing for xlamp leds. lumen maintenance cree now uses standardized ies lm ?80? 08 and tm?21? 11 methods for collecting long? term data and extrapolating led lumen maintenance. for information on the specifc lm ? 80 data sets available for this led, refer to the public lm-80 results document . please consult the long-term lumen maintenance application note for more details on crees lumen maintenance testing and forecasting. please read the thermal management application note for details on how thermal design, ambient temperature, and drive current affect the le d junction temperature. moisture sensitivity cree recommends keeping xlamp l e ds in the provided, resealable moisture-barrier packaging (mbp) until immediately prior to soldering. unopened mbps that contain xlamp le ds do not need special storage for moisture sensitivity. once the mbp is opened, xlamp xm ? l easywhite leds may be stored as msl 1 per jedec j?std? 033, meaning they have unlimited foor life in conditions of 30 oc/85% relative humidity (rh). regardless of storage condition, cree recommends sealing any unsoldered leds in the original mbp. rohs compliance the levels of rohs restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with eu directive 2011/65/ec (rohs2), as implemented january 2, 2013. rohs declarations for this product can be obtained from your cree representative or from the product documentation sections of www.cree.com . r each compliance re ach substances of very high concern (sv hcs) information is available for this product. since the e uropean chemical agency ( e cha) has published notice of their intent to frequently revise the s v hc listing for the foreseeable future, please contact a cree representative to insure you get the most up ? to? date reach svhc declaration. reach banned substance information (reach article 67) is also available upon request. copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xm -l easywhit e ? led
19 ul ? r ecognized component level 4 enclosure consideration. the led package or a portion thereof has been investigated as a fre and electrical enclosure per ansi/ ul 8750. v ision advisory warning. do not look at exposed lamp in operation. eye injury can result. for more information about leds and eye safety, please refer to the led e ye safety application note . n ote s - continued copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xm -l easywhit e ? led
20 mech anical dimensions thermal vias, if present, are not shown on these drawings. all measurements are .13 mm unless otherwise indicated. b ottom view size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 5.00 5.00 r 2.26 3.02 .73 4.78 .50 .50 2.78 3.78 4.78 4.78 .80 .25 .50 .97 4.78 .80 .25 4.78 4.78 2.78 .50 .50 1 / 1 16.000 a 2610-00039 outline drawing, xml ezw -- -- -- -- -- -- 2/2/14 d. cronin revisons rev description by date app'd a new release dc 2/2/14 recommended pcb solder pad recommended stencil pattern (hatched area is opening) all dimensions are .13mm unless otherwise noted anode t op view side view size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 5.00 5.00 r 2.26 3.02 .73 4.78 .50 .50 2.78 3.78 4.78 4.78 .80 .25 .50 .97 4.78 .80 .25 4.78 4.78 2.78 .50 .50 1 / 1 16.000 a 2610-00039 outline drawing, xml ezw -- -- -- -- -- -- 2/2/14 d. cronin revisons rev description by date app'd a new release dc 2/2/14 recommended pcb solder pad recommended stencil pattern (hatched area is opening) all dimensions are .13mm unless otherwise noted size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 5.00 5.00 r 2.26 3.02 .73 4.78 .50 .50 2.78 3.78 4.78 4.78 .80 .25 .50 .97 4.78 .80 .25 4.78 4.78 2.78 .50 .50 1 / 1 16.000 a 2610-00039 outline drawing, xml ezw -- -- -- -- -- -- 2/2/14 d. cronin revisons rev description by date app'd a new release dc 2/2/14 recommended pcb solder pad recommended stencil pattern (hatched area is opening) all dimensions are .13mm unless otherwise noted recommended pcb s older pad recommended s tencil pattern (shaded a rea is open) copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xm -l easywhit e ? led
21 tape and reel all cree carrier tapes conform to eia ? 481d, automated component handling systems standard. all dimensions in mm. size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection x .5 .xxx .010 .xx .03 .x .06 for sheet metal parts only .xx .01 .xxx .005 x .5 unless otherwise specified dimensions are in inches and after finish. tolerance unless specified: scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contaned within are the proprietary and cree confidential. this plot and the information of cree inc. notice surface finish: 63 330 +.25 -.75 12.4 +1.0 -.5 measured at edge 16.4 +0.2 .0 measured at hub 12.4 +.2 .0 measured at hub .2 13.1 1.9.4 .4 21 60 60 1 / 1 0.500 a 2400-00009 reel, 13" x 12mm, 3 piece snap - anti-static hips -- -- -- -- 09/29/09 d. cronin 2400-00009 index qty item comments 1 1 2400-00009-core 2 2 2400-00009-reel revisons rev description by date app'd size title of rev. sheet c drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 6 5 4 3 2 1 a b c d phone (919) 313-5300 fax (919) 313-5558 4600 silicon drive durham, n.c 27703 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .25 .xx .75 .x 1.5 for sheet metal parts only .xx .25 .xxx .125 x .5 unless otherwise specified dimensions are in millimeters and after finish. tolerance unless specified: surface finish: 1.6 trailer 160mm (min) of empty pockets sealed with tape (15 pockets min.) loaded pockets (1000 lamps) leader 400mm (min.) of empty pockets with at least 100mm sealed by tape (40 empty pockets min.) 12 1.75 4 8 3.35 1 / 1 3.000 b 2402-00012 xm loading spec -- -- -- -- -- -- 06/08/10 d. cronin revisons rev description by date app'd a loaded pocket count was 750 dds 11/8/10 bs b made cathode and anode note larger dc 2/26/12 end start user feed direction cathode side anode side 1 2 3 4 6 5 d c b a app'd date by revisions rev description size title of rev. sheet a drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 4600 silicon drive fax (919) 313-5558 durham, n.c 27703 phone (919) 313-5300 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .010 .xx .03 .x .06 for sheet metal parts only .xx .01 .xxx .005 x .5 unless otherwise specified dimensions are in inches and after finish. tolerance unless specified: surface finish: 63 1 / 1 drawing scale a 2402-00011 xm 5050 carrier tape 4/23/10 d. cronin cree reference drawing for tek-pak drawing 018275 .36[.014] t 5.40[.213] ao 3.35[.132] ko 3.0 5.40[.213] bo 2.00[.079] p2 4.00[.157] po do1.50 +.10 -.00 .0591 +.0039 -.0000 [ ] 10.25 [.404] e2 7.0 12.00[.472] nominal 12.30 [.484] max w 1.75[.069] e1 5.50[.217]f 1.50[.059] d1 8.00[.315] p pocket size ao - 5.40mm [.213"] bo - 5.40mm [.213"] ko - 3.35mm [.132"] 1 2 3 4 6 5 d c b a app'd date by revisions rev description size title of rev. sheet a drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 4600 silicon drive fax (919) 313-5558 durham, n.c 27703 phone (919) 313-5300 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .010 .xx .03 .x .06 for sheet metal parts only .xx .01 .xxx .005 x .5 unless otherwise specified dimensions are in inches and after finish. tolerance unless specified: surface finish: 63 1 / 1 drawing scale a 2402-00011 xm 5050 carrier tape 4/23/10 d. cronin cree reference drawing for tek-pak drawing 018275 .36[.014] t 5.40[.213] ao 3.35[.132] ko 3.0 5.40[.213] bo 2.00[.079] p2 4.00[.157] po do1.50 +.10 -.00 .0591 +.0039 -.0000 [ ] 10.25 [.404] e2 7.0 12.00[.472] nominal 12.30 [.484] max w 1.75[.069] e1 5.50[.217]f 1.50[.059] d1 8.00[.315] p pocket size ao - 5.40mm [.213"] bo - 5.40mm [.213"] ko - 3.35mm [.132"] 1 2 3 4 6 5 d c b a app'd date by revisions rev description size title of rev. sheet a drawing no. date date date check final protective finish material approved drawn by third angle projection scale a b c d 1 2 3 4 5 6 4600 silicon drive fax (919) 313-5558 durham, n.c 27703 phone (919) 313-5300 unauthorized person without the written consent may not be copied, reproduced or disclosed to any confidential information of cree, inc. this plot contained within are the proprietary and cree confidential. this plot and the information of cree inc. notice x .5 .xxx .010 .xx .03 .x .06 for sheet metal parts only .xx .01 .xxx .005 x .5 unless otherwise specified dimensions are in inches and after finish. tolerance unless specified: surface finish: 63 1 / 1 drawing scale a 2402-00011 xm 5050 carrier tape 4/23/10 d. cronin cree reference drawing for tek-pak drawing 018275 .36[.014] t 5.40[.213] ao 3.35[.132] ko 3.0 5.40[.213] bo 2.00[.079] p2 4.00[.157] po do1.50 +.10 -.00 .0591 +.0039 -.0000 [ ] 10.25 [.404] e2 7.0 12.00[.472] nominal 12.30 [.484] max w 1.75[.069] e1 5.50[.217]f 1.50[.059] d1 8.00[.315] p pocket size ao - 5.40mm [.213"] bo - 5.40mm [.213"] ko - 3.35mm [.132"] copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xm -l easywhit e ? led
22 p ac k aging label with cree bin code, qty, lot # label with cree bin code, qty, lot # vacuum-sealed moisture barrier bag dessicant (inside bag) humidity indicator card (inside bag) patent label label with customer order code, qty, reel id, po # patent label label with cree bin code, quantity, reel id label with cree bin code, quantity, reel id label with cree order code, quantity, reel id, po # label with cree order code, quantity, reel id, po # label with cree bin code, quantity, reel id unpackaged reel packaged reel boxed reel copyright ? 2011-2016 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree ? , xlamp ? and easywhite ? are registered trademarks and the cree logo is a trademark of cree, inc. ul ? and the ur logo are registered trademarks of ul llc. xlamp ? xm -l easywhit e ? led

▲Up To Search▲

Price & Availability of XMLEZW-00-0000-0B0HT427F

	To Download XMLEZW-00-0000-0B0HT427F Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .