lite-on dcc release lite-on technology corp. / optoelectronics no.90,chien 1 road, chung ho, new taipei city 23585, taiwan, r.o.c. tel: 886-2-2222-6181 fax: 886-2-2221-1948 / 886-2-2221-0660 http://www.liteon.com/opto led displayproduct data sheetLTA-1000M-01 spec no.: ds30-2006-172effective date: 12/05/2006revision: - bns-od-fc001/a4 bns-od-fc001/a4 bns-od-fc001/a4 bns-od-fc001/a4
lite - on technology corpor ation property of lite - on only part no.:lta - 1000m - 01 page: 0 of 6 bns - od - c131/a4 led display lta - 1000m - 01 data sheet rev description by - original spec phanomko r n j. spec . no . : ds30 - 2006 - 172 d a t e : 06 /nov/06 r e v . no . : - page no. : 0 of 5
lite - on technology corpor ation property of lite - on only part no.:lta - 1000m - 01 page: 1 of 6 bns - od - c131/a4 features rectangular light bar. large, bright, uniform light emitting areas. low power requirement. high brightness & high contrast. solid state reliability. categorized for luminous intensity. lead - free package (according to rohs) description the lta - 1000 m - 01 is a ten rectangular light sources array display designed for a variety of applications where a continuously large, bright source of light is required. this device utilizes green led chips, which are made from gap on a transparent gap substrate, this device utilizes yellow led chips, which are made from gaasp on a transparent gap substrate and this device utilizes hi - eff red led chips, which are made from gaasp on a transparent gap substrate, and has a black face and w hite segments. device part no. description multi color universal ten rectangular bar lta - 1000 m - 01
lite - on technology corpor ation property of lite - on only part no.:lta - 1000m - 01 page: 2 of 6 bns - od - c131/a4 package dimensions notes: 1. all dimensions are in millimeters. tolerances are ? 0.25 mm unless otherwise note. 2. pin tips shift tolerance is ? 0.4 mm. internal circuit diagram
lite - on technology corpor ation property of lite - on only part no.:lta - 1000m - 01 page: 3 of 6 bns - od - c131/a4 pin connection no. connection 1 anode a 2 anode b 3 anode c 4 anode d 5 anode e 6 anode f 7 anode g 8 anode h 9 anode j 10 a node k 11 cathode k 12 cathode j 13 cathode h 14 cathode g 15 cathode f 16 cathode e 17 cathode d 18 cathode c 19 cathode b 20 cathode a
lite - on technology corpor ation property of lite - on only part no.:lta - 1000m - 01 page: 4 of 6 bns - od - c131/a4 absolute maximum rating at ta=25 o c parameter green yellow hi - eff red unit power dissipation pe r segment 75 60 75 mw peak forward current per segment ( 1/10 duty cycle, 0.1ms pulse width ) 100 80 100 ma continuous forward current per segment derating linear from 25 per segment 25 0.33 20 0.27 25 0.33 ma ma/ reverse voltage per segment 5 5 5 v operating temperature range - 35 to +105 storage temperature range - 35 to +105 soldering conditions: 1/16 inch below seating plane for 3 seconds at 260 0 c or of temperature unit (during assembly) not over max temperature rating above . electrical / optical characteristics at ta=25 o c green parameter symbol min. typ. max. unit test condition average luminous intensity i v 800 2800 ? cd i f =10ma p eak emission wavelength ? p 565 nm i f =20ma spectral line half - width ? ? 30 nm i f =20ma dominant wavelength ? d 569 nm i f =20ma forward voltage per segment v f 2.1 2.6 v i f =20ma reverse current per segment i r 100 ? a v r =5v luminous intensity matching ratio i v - m 2:1 i f =10ma
lite - on technology corpor ation property of lite - on only part no.:lta - 1000m - 01 page: 5 of 6 bns - od - c131/a4 yellow parameter symbol min. typ. max. unit test condition average luminous intensity i v 540 2000 ? cd i f =10ma peak emission wavelength ? p 585 nm i f =20ma spectral line half - width ? ? 35 nm i f =20ma dominant wav elength ? d 588 nm i f =20ma forward voltage per segment v f 2.1 2.6 v i f =20ma reverse current per segment i r 100 ? a v r =5v luminous intensity matching ratio i v - m 2:1 i f =10ma hi - eff red parameter symbol min. typ. max. unit test condition av erage luminous intensity i v 540 2000 ? cd i f =10ma peak emission wavelength ? p 650 nm i f =20ma spectral line half - width ? ? 40 nm i f =20ma dominant wavelength ? d 630 nm i f =20ma forward voltage per segment v f 2.1 2.6 v i f =20ma reverse current per se gment i r 100 ? a v r =5v luminous intensity matching ratio (similar light area) i v - m 2:1 i f =10ma note: luminous intensity is measured with a light sensor and filter combination that approximates the cie (commision internationale de l eclairage) eye - re sponse curve.
lite - on technology corpor ation property of lite - on only part no.:lta - 1000m - 01 page: 6 of 6 bns - od - c131/a4 typical electrical / optical characteristic curves (25 o c ambient temperature unless otherwise noted)
|
