fox electronics 5570 enterprise parkway fort myers, florida 33905 usa +1.239.693.0099 fax +1.239.693.1554 http://www.foxonline.com emea tel/fax: +44 .1767.312632 | asia hong kong tel: +852.2854.4285 fax +852.2854.4282 | japan tel: +81.3.3374/2079 fax: +81.3.3374.5221 ? 2009 fox electronics | iso9001:2000 certifed options ? 5.0v (f550l) version available output (pin 3) active active high z ? enable / disable function inh (pin 1) open 2 '1' level v ih 70% v dd '0' level v il 30% v dd hcmos 5x3.2mm 3.3v smd oscillator rev. 5/7/2009 rohs compliant / pb free http://www.foxonline.com/need_a_sample.htm model: f530l series page 1 of 2 feat u res ? 3.3v operation ? standby function ? tape and reel (1,000 pcs. std) frequency stability 1 100ppm 100ppm 50ppm 50ppm 25ppm 25ppm* 20ppm* operating temperature (oc) -10 ~ +70 -40 ~ +85 -10 ~ +70 -40 ~ +85 -10 ~ +70 -40 ~ +85 -10 ~ +70 frequency range (mhz) 1.544 ~ 155.520 1.544 ~ 155.520 1.544 ~ 155.520 1.544 ~ 155.520 1.544 ~ 155.520 1.544 ~ 155.520 1.544 ~ 77.760 f530l f530lr f535l f535lr f536l f536lr f538l 1.544 ~ 155.520 mhz -55oc ~ +125oc 3.3v 10% 15ma 20ma 25ma 40ma 40% ~ 60% 7ns 7ns 10% v dd 90% v dd min 2ma min -2ma min 15pf 10a 10ms 150ns 10ms 260oc / 10 seconds 1 au parameters frequency range (f o ) storage temperature range (t stg ) supply voltage (v dd ) input current (i dd ) 1.544 ~ 32.000 mhz 32.000+ ~ 50.000 mhz 50.000+ ~ 67.000 mhz 67.000+ ~ 155.520 mhz output symmetry (50% v dd ) rise time (10% ~ 90% v dd ) (t r ) fall time (90% ~ 10% v dd ) (t f ) output voltage (v ol ) (v oh ) output current (i ol ) (i oh ) output load (hcmos) standby current start-up time (t s ) output disable time 2 output enable time 2 refow soldering temp moisture sensitivity level (msl) termination finish ? e lectrical characteristics max (unless otherwise noted) 1 inclusive of 25oc tolerance, operating temperature range, input voltage change, load change, aging, shock, and vibration. *excludes shock/vibration 2 an internal pullup resistor from pin 1 to pin 4 allows active output if pin 1 is left open. note: a 0.01f bypass capacitor should be placed between v dd (pin 4) and gnd (pin 2) to minimize power supply line noise. drawing is for reference to critical specifcations defned by size measurements. certain non-critical visual attributes, such as side castellations, reference pin shape, etc. may vary. all specifcations subject to change without notice. model number part number 474-frequency-xxxxx 475-frequency-xxxxx 476-frequency-xxxxx 550-frequency-xxxxx 492-frequency-xxxxx 636-frequency-xxxxx 546-frequency-xxxxx ? part n umber selection learn more - internet required 5.0 0.2 1.3 max solder pad layout recommended 3.2 0.2 2.540.1 1.2 pin connections #1 e/d #2 gnd #3 output #4 v dd 1.0 2.25 1.24 2.54 1.29 # 1 # 2 # 4 # 3 # 1 # 2 # 3 # 4 top view bottom view dot denotes pin 1
35 fox electronics 5570 enterprise parkway fort myers, florida 33905 usa +1.239.693.0099 fax +1.239.693.1554 http://www.foxonline.com emea tel/fax: +44 .1767.312632 | asia hong kong tel: +852.2854.4285 fax +852.2854.4282 | japan tel: +81.3.3374/2079 fax: +81.3.3374.5221 ? 2009 fox electronics | iso9001:2000 certifed hcmos 5x3.2mm 3.3v smd oscillator rev. 5/7/2009 rohs compliant / pb free http://www.foxonline.com/need_a_sample.htm model: f530l series page 2 of 2 ? tape spe cifica tions (millimeters) model f530l series a ?1.5 b 4.0 c 8.0 d 5.5 e 12.0 f 1.5 std reel qty 1,000 ? ree l specifica tions (millimeters) g 2.0 h ?13 i ?21 j ?62 k ?180 l 13.5 m 2.0 model f530l series
|