all published data at t case = 25c unless otherwise indicated esd: electrostatic discharge sensitive deviceobserve handling precautions! 4600 silicon drive | durham, nc 27703 | www.wolfspeed.com rev. 04, 2018-05-19 wideband ldmos two-stage integrated power amplifer 20 w, 28 v, 1805 C 2200 mhz features ? on-chip matching for broadband operation ? typical pulsed cw performance, 1990 mhz, 28 v, combined outputs - output power at p 1db = 20.9 w - effciency = 56% - gain = 31 db ? capable of handling 10:1 vswr @28 v, 20.9 w (cw) output power ? integrated esd protection ? human body model class 1a (per ansi/esda/ jedec js-001) ? integrated temperature compensation ? pb-free and rohs compliant description the PTMC210204MD is a wideband, two-stage, ldmos integrated power amplifier. it incorporates internal matching for operation from 1805 mhz to 2200 mhz, and dual independent outputs with 10 w of output power each. it is available in an 14-lead plastic overmold package with gull wing leads. rf characteristics single-carrier wcdma specifications (tested in wolfspeed test fixture) v dd = 28 v, i dq1(a+b) = 20 ma, i dq2(a+b) = 120 ma, p out = 2.5 w avg, ? = 1990 mhz, 3gpp wcdma signal, channel bandwidth = 3.84 mhz, peak/average = 7.5 db @ 0.01% ccdf characteristic symbol min typ max unit linear gain g ps 28.5 30.5 33.5 db power added effciency pae 17 19 % adjacent channel power ratio acpr C47 C40 dbc 0 15 30 45 60 0 10 20 30 40 25 30 35 40 45 efficiency (%) peak/average ratio, gain (db) average output power (dbm) single-carrier wcdma drive-up v dd = 28 v, i dq1 = 40 ma, i dq2 = 240 ma, ? = 1930 mhz 3gpp wcdma signal, 7.50 db par, 3.84 mhz bandwidth gain par @ 0.01% ccdf efficiency c210204md-gr1a PTMC210204MD package pg-hb1dso-14-1 (formed leads) PTMC210204MD
4600 silicon drive | durham, nc 27703 | www.wolfspeed.com rev. 04, 2018-05-19 2 PTMC210204MD dc characteristics stage 1 conditions symbol min typ max unit drain leakage current v ds = 28 v, v gs = 0 v i dss 0.1 a v ds = 60 v, v gs = 0 v i dss 1.0 a gate leakage current v gs = 1 v, v ds = 0 v i gss 0.1 a on-state resistance v gs = 10 v, v ds = 0.1 v r ds(on) 8 ? operating gate voltage v ds = 28 v, i dq1 = 20 ma v gs1 2.7 v fixture operating gate voltage v ds = 28 v, i dq1 = 20 ma v gs1 4.52 v stage 2 conditions symbol min typ max unit drain-source breakdown voltage v gs = 0 v, i ds = 10 ma v br(dss) 65 v drain leakage current v ds = 28 v, v gs = 0 v i dss 0.1 a v ds = 60 v, v gs = 0 v i dss 1.0 a gate leakage current v gs = 1 v, v ds = 0 v i gss 0.1 a on-state resistance v gs = 10 v, v ds = 0.1 v r ds(on) 0.9 ? operating gate voltage v ds = 28 v, i dq2 = 120 ma v gs2 2.72 v fixture opererating gate voltage v ds = 28 v, i dq2 = 120 ma v gs2 4.74 v maximum ratings parameter symbol value unit drain-source voltage v dss 65 v gate-source voltage v gs C6 to +12 v junction temperature t j 225 c storage temperature range t stg C65 to +150 c operating voltage v dd 0 to 32 v thermal characteristics characteristic symbol value unit thermal resistance stage 1 (t case = 70c, 10 w cw) r q jc 9.7 c/w stage 2 (t case = 70c, 10 w cw) r q jc 3.1 c/w moisture sensitivity level level test standard package temperature unit 3 ipc/jedec j-std-020 260 c
4600 silicon drive | durham, nc 27703 | www.wolfspeed.com rev. 04, 2018-05-19 3 PTMC210204MD 0 15 30 45 60 0 10 20 30 40 25 30 35 40 45 efficiency (%) peak/average ratio, gain (db) average output power (dbm) single-carrier wcdma drive-up v dd = 28 v, i dq1 = 40 ma, i dq2 = 240 ma, ? = 1960 mhz 3gpp wcdma signal, 7.50 db par, 3.84 mhz bandwidth gain efficiency par @ 0.01% ccdf c210204md-gr1b 0 15 30 45 60 0 10 20 30 40 25 30 35 40 45 efficiency (%) peak/average ratio, gain (db) average output power (dbm) single-carrier wcdma drive-up v dd = 28 v, i dq1 = 40 ma, i dq2 = 240 ma, ? = 1990 mhz 3gpp wcdma signal, 7.50 db par, 3.84 mhz bandwidth par @ 0.01% ccdf efficiency gain c210204md-gr1c ordering information type and version order code package and description shipping PTMC210204MD v1 r5 PTMC210204MD-v1-r5 pg-hb1dso-14-1, 14-lead, overmold tape reel, 500 pcs evaluation boards order code frequency description ltn/PTMC210204MD v1 1930 C 1990 mhz class ab with combined outputs, r0430, 0.508 mm thick ltn/PTMC210204MD e2 1805 C 1880 mhz class ab with combined outputs, r0430, 0.508 mm thick ltn/PTMC210204MD e3 2110 C 2200 mhz class ab with combined outputs, r0430, 0.508 mm thick find gerber files for these reference fixtures on the wolfspeed web site at www.wolfspeed.com/rf typical rf performance (data taken in production test fixture)
4600 silicon drive | durham, nc 27703 | www.wolfspeed.com rev. 04, 2018-05-19 4 PTMC210204MD 5 15 25 35 45 55 -65 -55 -45 -35 -25 -15 25 30 35 40 45 efficiency(%) acp up & low (dbc) average output power (dbm) single-carrier wcdma drive-up v dd = 28 v, i dq1 = 40 ma, i dq2 = 240 ma, ? = 1990 mhz, 3gpp wcdma signal, 7.5 db par, 3.84 mhz bandwith efficiency acp low acp up c210204md-gr2c 0 5 10 15 20 25 30 10 15 20 25 30 35 40 1820 1870 1920 1970 2020 2070 2120 drain efficiency (%) gain (db) frequency (mhz) single-carrier wcdma broadband v dd = 28 v, i dq1 = 40 ma, i dq2 = 240 ma, p out = 34 dbm, 3gpp wcdma signal, 7.5 db par, 3.84 mhz bw gain efficiency c210204md-gr3 typical performance (cont.) 5 15 25 35 45 55 -65 -55 -45 -35 -25 -15 25 30 35 40 45 efficiency(%) acp up & low (dbc) average output power (dbm) single-carrier wcdma drive-up v dd = 28 v, i dq1 = 40 ma, i dq2 = 240 ma, ? = 1930 mhz, 3gpp wcdma signal, 7.5 db par, 3.84 mhz bandwidth efficiency acp up acp low c210204md-gr2a 5 15 25 35 45 55 -65 -55 -45 -35 -25 -15 25 30 35 40 45 efficiency(%) acp up & low (dbc) average output power (dbm) single-carrier wcdma drive-up v dd = 28 v, i dq1 = 40 ma, i dq2 = 240 ma, ? = 1960 mhz, 3gpp wcdma signal, 7.5 db par, 3.84 mhz bandwidth efficiency acp low acp up c210204md-gr2b
4600 silicon drive | durham, nc 27703 | www.wolfspeed.com rev. 04, 2018-05-19 5 PTMC210204MD -50 -40 -30 -20 -10 -55 -50 -45 -40 -35 1820 1870 1920 1970 2020 2070 2120 return loss (db) acp (dbc) frequency (mhz) single-carrier wcdma broadband v dd = 28 v, i dq1 = 40 ma, i dq2 = 240 ma, p out = 34 dbm, 3gpp wcdma signal, 7.5 db par acp up input return loss c210204md-gr4 0 15 30 45 60 0 10 20 30 40 25 30 35 40 45 efficiency (%) gain (db) output power (dbm) cw performance v dd = 28 v, i dq1 = 40 ma, i dq2 = 240 ma gain efficiency c210204md-gr5 1930 mhz 1960 mhz 1990 mhz typical performance (cont.) -40 -30 -20 -10 20 25 30 35 1850 1900 1950 2000 2050 2100 input return loss (db) power gain (db) frequency (mhz) small signal cw v dd = 28 v, i dq1 = 40 ma, i dq2 = 240 ma gain input return loss c210204md-gr7
4600 silicon drive | durham, nc 27703 | www.wolfspeed.com rev. 04, 2018-05-19 6 PTMC210204MD load pull cw signal: v dd1 = v dd2 = 28 v, i dq1 = 20 ma, i dq2 = 120 ma p 1db class ab max output power max pae freq [mhz] zs [ ?] zl [ ?] gain [db] p out [dbm] p out [w] pae [%] zl [ ?] gain [db] p out [dbm] p out [w] pae [%] 1930 30.5 C j12.8 15.40 C j8.85 29.92 41.07 12.79 51.47 18.01 + j1.18 31.45 39.94 9.86 57.02 1960 30.5 C j12.8 14.58 C j7.65 29.97 41.09 12.85 52.17 17.16 + j0.14 31.26 40.16 10.38 57.35 1990 30.5 C j12.8 15.26 C j9.82 29.61 41.06 12.76 50.58 16.16 + j0.97 31.25 39.88 9.73 57.30 reference circuit, tuned for 1930 C 1990 mhz dut PTMC210204MD v1 test fixture part no. ltn/PTMC210204MD v1 pcb rogers 4350, 0.508 mm [.020"] thick, 2 oz. copper, r = 3.66 find gerber files for this reference fixture on the wolfspeed web site at www.wolfspeed.com/rf reference circuit assembly diagram (not to scale) p t m c 2 1 0 2 0 4 m d _ c d _ 0 2 _ 4 - 2 9 - 2 0 1 6 ro4350, .20 mil, 2 oz PTMC210204MD_02 r105 r109 c113 c114 c103 c104 r101 c102 r106 c111 r102 c112 r111 r110 c207 c206 u1 c109 c110 c106 c101 c105 r103 rf_out rf_in c205 c204 c208 r201 u2 c201 c203 c202 r104 r108 c108 c107 v g2b v g1b v d1b v d2b r107 v d1a v g2a v g1a v d2a a
4600 silicon drive | durham, nc 27703 | www.wolfspeed.com rev. 04, 2018-05-19 7 PTMC210204MD component information component description manufacturer p/n input c101, c103, c105, c107, c111, c113, c203, c207 capacitor, 4.7 f murata electronics north america grm32er71h475ka88l c102, c104, c106, c108, c112, c114, c202, c206 capacitor, 10 f taiyo yuden umk325c7106mm-t c109, c110 capacitor, 0.8 pf atc atc800a0r8ct250t c201, c204, c205, c208 capacitor, 10 pf atc atc800a100jt250t r101, r103 resistor, 0.0 ohms panasonic electronic components erj-3gey0r00v r102, r201 resistor, 50 ohms anaren c8a50z4a r104, r105, r106, r107 resistor, 1k ohms panasonic electronic components erj-8geyj102v r108, r109, r110, r111 resistor, 4.3k ohms panasonic electronic components erj-8geyj432v u1, u2 hybrid coupler anaren x3c19p1-03s reference circuit (cont.) pinout diagram vd2/rfout b vd1 a vg2 a vg1 a rfin a n/c n/c n/c n/c rfin b vg1 b vg2 b vd1b vd2/rfout a 1 2 3 4 5 6 7 8 9 10 11 12 14 13 p t m c 2 1 0 2 0 4 m d _ p d _ 5 - 2 - 2 0 1 6 source: plated copper heat slug on back - side of package vd2/rf out a vd2/rf out b rf in a rf in b
4600 silicon drive | durham, nc 27703 | www.wolfspeed.com rev. 04, 2018-05-19 8 PTMC210204MD package outline specifications package pg-hb1dso-14-1 (formed leads) 4x 1. 02 9. 02 0.52 x 45 2x 5 . 30 7. 65 2.35 3.83 2x 2. 02 2x 0 . 35 1 . 50 2x 3. 25 11 x 1.00 13.06 4 . 00 2.62 0. 10 max. 1.27 1. 86 z y 12 x 0. 35 1 14.94 0.15 4 x 7 2 x 10 19. 44 1 viewy pg - hb1dso - 14 l_ 01 _ 11 - 06 - 2015 z (5:1) r 0.20 1.00 1.02 2 2 3 . 00 0. 05 2x 0. 50 6 . 91 3 . 45 16 . 26 18 . 44 0 .25 0 . 25 5 3 stand off 0...0. 1 0 min . diagram notesCunless otherwise specifed: 1. mold/dam bar/metal protusion of 0.30mm max per side not included. 2. metal protrusion are connected to source and shall not exceed 0.10mm max. 3. fillets and radii: all radii are 0.3 mm max. 4.interpret dimensions and tolerances per iso 8015. 5. dimensions are mm. 6. all tolerances 0.1mm unless specifed otherwise. 7. all metal surfaces pre-plated, except area of cut. 8. lead thickness: 0.25 mm. 9. gold plating thickness: 0.25 micron [10 microinch] max. diagram notesunless otherwise specifed: 1. mold/dam bar/metal protrusion of 0.30 mm max per side not included. 2. metal protrusions are connected to source and shall not exceed 0.10 mm max. 3. fillets and radii: all radii are 0.30 mm max. 4. interpret dimensions and tolerances per iso 8015. 5. dimensions are mm. 6 all tolerances 0.1 mm unless specifed otherwise. 7. all metal surfaces pre-plated, except area of cut. 8. lead thickness: 0.25 mm. 9. gold plating thickness: 0.25 micron max. pg-hb1dso-14-1_01_01-16-2017
4600 silicon drive | durham, nc 27703 | www.wolfspeed.com rev. 04, 2018-05-19 9 PTMC210204MD package outline specifications (cont.) package pg-hb1dso-14-1 (formed leads, bottom side) 4x 1. 02 9. 02 0.52 x 45 2x 5 . 30 7. 65 2.35 3.83 2x 2. 02 2x 0 . 35 1 . 50 2x 3. 25 11 x 1.00 13.06 4 . 00 2.62 0. 10 max. 1.27 1. 86 z y 12 x 0. 35 1 14.94 0.15 4 x 7 2 x 10 19. 44 1 viewy pg - hb1dso - 14 l_ 01 _ 11 - 06 - 2015 z (5:1) r 0.20 1.00 1.02 2 2 3 . 00 0. 05 2x 0. 50 6 . 91 3 . 45 16 . 26 18 . 44 0 .25 0 . 25 5 3 stand off 0...0. 1 0 min . diagram notesCunless otherwise specifed: 1. mold/dam bar/metal protusion of 0.30mm max per side not included. 2. metal protrusion are connected to source and shall not exceed 0.10mm max. 3. fillets and radii: all radii are 0.3 mm max. 4.interpret dimensions and tolerances per iso 8015. 5. dimensions are mm. 6. all tolerances 0.1mm unless specifed otherwise. 7. all metal surfaces pre-plated, except area of cut. 8. lead thickness: 0.25 mm. 9. gold plating thickness: 0.25 micron [10 microinch] max. diagram notesunless otherwise specifed: 1. mold/dam bar/metal protrusion of 0.30 mm max per side not included. 2. metal protrusions are connected to source and shall not exceed 0.10 mm max. 3. fillets and radii: all radii are 0.30 mm max. 4. interpret dimensions and tolerances per iso 8015. 5. dimensions are mm. 6 all tolerances 0.1 mm unless specifed otherwise. 7. all metal surfaces pre-plated, except area of cut. 8. lead thickness: 0.25 mm. 9. gold plating thickness: 0.25 micron max. pg-hb1dso-14-1_01_01-16-2017
|
