technical data sheet rpc-1.85 mismatch jack 08K150-060S3 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 email : info@rosenberger.de page 1 / 2 rf_35/09.14/6.2 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg all dimensions are in mm; tolerances according to iso 2768 m-h interface according to iec 61169-32 mechanically compatible with rpc-2.40 documents application note an001 ?calibration services? material and plating connector parts material plating center contact cube gold, min. 1.27 m, over nickel outer contact stainless steel passivated dielectric ps substrate al 2 o 3
technical data sheet rpc-1.85 mismatch jack 08K150-060S3 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 email : info@rosenberger.de page 2 / 2 rf_35/09.14/6.2 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg electrical data frequency range dc to 70 ghz vswr 1.2 ? 0.07, dc to 40 ghz 1.2 ? 0.13, 40 ghz to 70 ghz dc resistance 60 ? ? 0.3 ? power handling 0.5 w mechanical data mating cycles ? 500 maximum torque 1.65 nm recommended torque 0.90 nm gauge 0.00 mm to 0.03 mm environmental data operating temperature range 1 + 20 c to +26 c rated temperature range of use 2 0 c to +50 c storage temperature range - 40 c to +85 c rohs compliant 1 temperature range over which these specification are valid. 2 this range is underneath and above the operating temperatur e range, within the mismatch is fully functional and could be used without damage. declaration of calibration options factory calibration standard delivery for this calibration standard includes a factory calibration. the calibration certificate issued reports individual calibration results, traceabl e to national / international standards. model based standard definitions are reported in an agilent/keysi ght, rohde & schwarz and anritsu compatible vna format. accredited calibration not available. for further, more detailed information see application note an001 on the rosenberger homepage. calibration interval recommendation 12 months packing standard 1 pce in box weight 7.6 g/pce draft date approved date rev. engineering change number name date kerstin herzog 05.02.08 markus mller 14.09. 16 c00 16-1390 marion striegler 14.09.16 while the information has been carefully compiled to the best of our knowledge, nothing is int ended as representation or warran ty on our part and no statement herein shall be c onstrued as recommendation to infringe existi ng patents. in the effort to improve ou r products, we reserve the right to make changes judged to be necessary.
|
