bxy43 ifag im m rpd d hir 1 of 5 v2, february 2011 hirel silicon pin diode ? hirel discrete and microwave semiconductor ? current controlled rf resistor for rf attenuators and switches ? high reverse voltage ? hermetically sealed microwave package ? space qualified esa/scc detail spec. no.: 5513/030 type variant no.s 01 to 03 esd : e lectro s tatic d ischarge sensitive device, observe handling precautions! type marking ordering code pin configuration package bxy43 - t (ql) - see below t bxy43 - t1 (ql) t1 (ql) quality level: p: professional quality h: high rel quality s: space quality es: esa space quality (see order instructions for ordering example) t t1 1 2
bxy43 ifag im m rpd d hir 2 of 5 v2, february 2011 maximum ratings parameter symbol valu es unit reverse voltage v r 150 v forward current i f 400 ma power dissipation 1) p tot 500 mw operating temperature range t op - 55 to +150 c storage temperature range t stg - 65 to +175 c soldering temperature 2) t sol +235 c junction temperature t j 150 c thermal resistance junction - case bxy43 - t bxy43 - t1 r th(j - c) 100 125 k/w notes.: 1.) for bxy43 - t: at t case = 100 c. for t case > 100 c derating is required. for bxy43 - t1: at t case = 87,5 c. for t case > 87,5 c derating is required. 2.) du ring 5 sec. maximum. the same terminal shall not be resoldered until 5 minutes have elapsed. electrical characteristics at t a =25c; unless otherwise specified parameter symbol values unit min. typ. max. dc characteristics reverse current 1 v r1 = 150v i r1 - - 100 na reverse current 2 v r2 =100v i r2 - - 10 na forward voltage i f =100ma v f - 0,97 1 v
bxy43 ifag im m rpd d hir 3 of 5 v2, february 2011 electrical characteristics (continued) parameter symbol values unit min. typ. max. ac characteristics total capacitance v r =50v; f=1mhz bxy43 - t, - t1 c t - 0,3 0,45 pf forward resistance 1 f=100mhz, i f1 =20a r f1 - 55 70 ? f2 =1ma r f2 - 2,2 3,0 ? f3 =10ma r f3 - 0,9 1,5 ? f =10ma, i r =6ma, i r =3ma l 250 650 ns
bxy43 ifag im m rpd d hir 4 of 5 v2, february 2011 t package symbol millimetre min max a 1,30 1,45 b 1,15 1,35 c - 0,40 t1 package symbol millimetre min max a 1,30 1,45 b 1,15 1,35 c - 0,40 d 0,10 0,50 e - 0,30 f 0,06 0,10 g 5,50 - h 0,40 0,60 b c x1 y1 y2 a 1 2 b c y1 y2 x1 g d h a e f g 1 2
bxy43 ifag im m rpd d hir 5 of 5 v2, february 2011 edition 20 11 - 0 2 published by infineon technologie s ag 85579 neubiberg, germany ? infineon technologies ag 2011 all rights reserved. attention plea se! the information given in this document shall in no event be regarded as a guarantee of conditions or characteristics (beschaffenheitsgarantie). with respect to any examples or hints given herein, any typical values stated herein and/or any informatio n regarding the application of the device, infineon technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non - infringement of intellectual property rights of an third party. informatio n for further information on technology, delivery terms and conditions and prices please contact your nearest infineon technologies office ( www.infineon.com ). warnings due to technical requirements components may c ontain dangerous substances. for information on the types in question please contact your nearest infineon technologies office. infineon technologies components may only be used in life - support devices or systems with the express written approval of infine on technologies, if a failure of such components can reasonably be expected to cause the failure of that life - support device or system, or to affect the safety or effectiveness of that device or system. life support devices or systems are intended to be im planted in the human body, or to support and/or maintain and sustain and/or protect human life. if they fail, it is reasonable to assume that the health of the user or other persons may be endangered.
|
