racd35-a lightline ac/dc-converter with 5 year warranty 35 watt pfc single output selection guide description input voltage range 90-305 vac input frequency range 47-63hz power factor full load, 277vac >0.90 full load, 230vac >0.95 full load, 110vac >0.98 ac input current 110vac 0.5a 230vac 0.3a inrush current (max.) 264vac cold start 60a leakage current 230vac <0.25ma output current accuracy (includes line regulation, load regulation and set-up tolerance) 5% isolation voltage 3.75kvac / 1minute short circuit protection hiccup mode & recovers after fault condition removed over voltage protection 115% - 135% output voltage latch mode over temperature protection thermistor 105c 10c type latch mode dimming control: pwm 10.90 efficiency up to 83% ip67 certified 3 in 1 dimming features led driver part rated output output efficiency number power current voltage (typ.) (w) (ma) (vdc) (%) racd35-500a 28.5 500 48 - 57 82 racd35-700a 33,6 700 33 - 48 79 racd35-1000a 36 1000 24 - 36 82 RACD35-1400A 33.6 1400 12 - 24 81 racd35-2500a 30 2500 9 - 12 80 ul8750 certified en61347 certified en55015 certified en61547 certified a a ,a -a .a 0 + ) # ; )20 3+2 ! "
rohs 2011/65/eu 6/6 e340696 refer to application notes note: all led drivers may not be used without a load. they must be switched on the primary side only. noncompliance may damage the led or reduce its lifetime. the 35w led drivers of the racd35-a series come with a 3-in-1 dimming function so that the led load can be dimmed with analog (1-10v), pwm, or resistor inputs. due to wide input voltage range of 90 - 305vac these led drivers are suitable for worldwide use. they operate with efficiencies of up to 83%, feature active pfc, and are fully protected against short circuit, overvoltage, and over-temperature conditions. they are sealed against damp and wet conditions, and the warranty is 5 years . derating-graph (ambient temperature) l-46 www.recom-power.com rev: 0/2015
specifications (measured at 240vac and 25c ambient temperature) racd35-a racd35-a series
217 204
(> 14
0 @ ,-,.)?, f#.)? )94
)45 package style & pinning technical characteristics lightline ac/dc-converter a a ,a -a .a 3 + * . 8 2
2) -!" , 3+ # b +; 2
!
!
-' e e a a 2 )
7 $
( emission report: ha130831-sace en55015, class b iec61000-3-2 iec61000-3-3 fcc report: ha130831-safd part 15, class b emc report: ha130831-sace iec61000-4-2, 3, 4, 5, 6, 8, 11 immunity en61547 ip67 report: 14022002 iec/en 60598-1 iec/en 60529 dimming curve load vs. input voltage www.recom-power.com l-47 rev: 0/2015 the product information and specifications are subject to change without prior notice. recom products are not authorized for us e in safety-critical applications (such as life support) without recoms explicit written consent. a safety-critical application is defined as an applica tion where a failure of a recom product may reasonably b e expected to endanger or cause loss of life, inflict bodily harm or damage property. the buyer shall indemnify and hold harmless recom, its affiliated companies and its representatives against any damage claims in connecti on with the unauthorized use of recom products in such safety-critical applications. maximum number of led drivers per circuit breakers condition circuit breaker circuit breaker current typ 10a 16a 20a 25a 115vac, 1ohm 90 phase angle c 22 35 39 55 230vac, 1ohm 90 phase angle b 18 30 35 43 c 29 46 55 69 277vac, 1ohm 90 phase angle b 21 34 41 50 c 33 52 63 79
|
