rectifier diode AUS501HF repetitive voltage up to 600 v mean forward current 5103 a surge current 45 ka final specification mar. 17 - issue: 4 symbol characteristic conditions tj [c] value unit blocking v rrm repetitive peak reverse voltage 190 600 v v rsm non-repetitive peak reverse voltage 190 700 v i rrm repetitive peak reverse current v=vrrm 190 75 ma conducting i f (av) mean forward current 180 sin, 50 hz, th=85c, double side cooled 5103 a i f (av) mean forward current 180 sin, 50 hz, tc=55c, double side cooled 8136 a i fsm surge forward current sine wave, 10 ms 190 45 ka i2 t i2 t without reverse voltage 10125 x 10 3 a2s v fm forward voltage forward current = 6000 a 25 1,35 v v f(to) threshold voltage 190 0,84 v r f forward slope resistance 190 0,050 mohm switching t rr reverse recovery time s q rr reverse recovery charge 190 c i rr peak reverse recovery current a mounting r th(j-c) thermal impedance, dc junction to case, double side cooled 14,0 c/kw r th(c-h) thermal impedance case to heatsink, double side cooled 5,0 c/kw t j operating junction temperature -30 / 190 c f mounting force 25.0 / 50.0 kn mass 50 g ordering information : AUS501HF s 06 standard specification vrrm/100 poseico spa via pillea 42 - 44, 16153 genova - italy tel. + 39 010 8599400 - fax + 39 010 8682006 sales office: tel. + 39 010 8599400 - sales@poseico.com
AUS501HF rectifier diode final specification mar. 17 - issue: 4 dissipation characteristics square wave dc 180 120 90 60 30 40 60 80 100 120 140 160 180 200 0 1000 2000 3000 4000 5000 6000 7000 8000 9000 th [ c] i f(av) [a] dc 180 120 90 60 30 0 2000 4000 6000 8000 10000 12000 0 1000 2000 3000 4000 5000 6000 7000 8000 9000 p f(av) [w] i f(av) [a]
AUS501HF rectifier diode final specification mar. 17 - issue: 4 dissipation characteristics sine wave 180 120 90 60 30 40 60 80 100 120 140 160 180 200 0 1000 2000 3000 4000 5000 6000 7000 th [ c] i f(av) [a] 180 120 90 60 30 0 2000 4000 6000 8000 10000 12000 0 1000 2000 3000 4000 5000 6000 7000 p f(av) [w] i f(av) [a]
AUS501HF rectifier diode final specification mar. 17 - issue: 4 distributed by 0 2000 4000 6000 8000 10000 12000 14000 16000 18000 0 0,5 1 1,5 2 forward current [a] forward voltage [v] forward characteristic tj = 190 c 0 2 4 6 8 10 12 14 16 0,001 0,01 0,1 1 10 100 zth j - h [ c/kw] t[s] transient thermal impedance double side cooled 0 5 10 15 20 25 30 35 40 45 50 1 10 100 itsm [ka] n cycles surge characteristic tj = 190 c all the characteristics given in this data sheet are guaranteed only with uniform clamping force, cleaned and lubricated heatsink, surfaces with flatness < . 03 mm and roughness < 2 m . in the interest of product improvement poseico spa reserves the right to change any data given in this data sheet at any time without previous notice . if not stated otherwise the maximum value of ratings (simbols over shaded background) and characteristics is reported .
|
