mating face location 11 locations 6-10 locations 1-5 pin 1 indicator wiring face pin 1 indicator 2 orient high speed inserts in frame cavity as shown pin 1 indicator 2 i2 emi ita frame sold separately rev description revisions date engr a do not scale drawing b c d a b c d 4 3 2 1 4 3 2 1 a notes: 1. for application use & care information consult vpc users guide @www.vpc.com r herron 3/26/15 drawing origination - ecn #5901 the information contained herein is the exclusive property of virginia panel corporation and is submittedfor use by the customer only. the data shall not be duplicated, used, or disclosed in whole or in part for any purpose other than to maintain the equipment provided. consult with virginia panel corporation engineering if more detail is required. 510143001 sheet 1 of 1 rev a 510143001 customer drawing www.vpc.com virginia panel corporation hs insert i2 mx rcv 18117 cage code size c 4:1 scale: [millimeters] inches 9/2/14 dwg.no. relative connector positions and wire routing are generic and may vary with pinout dimensions are shown as:
|