dimensions vcxo2e family package 53.2 mm t range up to 210c 5 to 40mhz recommended solder pad: all dimensions in mm typical electrical characteristics at +25c absolute frequency pulling range apr (minimum frequency deviation including 2)* tempperature range b= -40 to 85c c= -55 to 125c r= -10 to 150c s= -10 to 175c t= -10 to 210c f/f 130 110 90 50 30 ppm supply voltage 5% 1)* vdd 3.3 v input current idd see table 1 output signal hc-mos compatible symmetry at vdd/2 40 / 60 % rise & fall time (load 15pf 20% to 80%) 5 ns level "0" & "1" <0.4>vdvd-0.5 v start-up time t <5 ms load min / max 3/47 pf 100% leadfree, rohscompliant: description: this smd oscillator in ceramic package has been specially designed for surface mount using infrared, vapor phase or epoxy techniques. a pplications: - downhole and well drilling equipments - avionics - airbone equipments - geothermal equipments - fire fghter equipments the vcxo2e's are supplied on trays (128 pcs / tray) for pick-and-place equipment, the parts are available in 12mm tapes with 250 parts min 1000 parts min smt voltage control oscillator in ceramic package fundamental quartz mode frequency high shock and vibration resistance wide temperature range low aging ultra low internal msl very fast start-up excellent solderability swiss made quality customer specification on request 5.00 2.35 3.20 1.6 1.6 1 2 3 4 1.5 2.7 1.5 1 1.6 1 4 3 1 2 pin 1 vc pin 2 gnd pin 3 fout pin 4 vdd package: bottom view * 1) c = 47nf ceramic must be connected between gnd & vdd * 2) apr is inclusive of frequency deviation due to stability adjustment at +25c, long term aging 1 year over supply voltage 5% over load min to max frequency stability over t range
version 4.0/05.2017 micro crystal ag tel. +41 32 655 82 82 mhlestrasse 14 fax +41 32 655 82 83 ch-2540 grenchen sales@microcrystal.com switzerland www.microcrystal.com environmental characteristics: storage temp. range -65 to +125c vibration resistance (survival) 10 to 2000hz / 80g shocks resistance (survival) 10000g / 0.3ms / ? sine vc (voltage control range) 0 to 3.3v response slope positive frequency bandwich 10khz input impedance 100kohm terminations and processing: refow soldering 260c / 10s max package ceramic 5 x 3.2 x 1.6mm lids ceramic (kovar on version t) terminations option t3 on request (not available on t temperature range) with tinned ag/cu/sn product description and ordering information: all specifications subject to change without notice. frequency ?mhz? 10 12.288 12.8 20 24 24.576 25.6 other frequencies on request standard frequencies: frequency controle range: v = vdd 3.3v b = -40 to 85c c = -55 to 125c r = -10 to 150c s = -10 to 175c t = -10 to 210c x = custom frequency option 2 blank au plated t3 = tinned customer spec n vcxo2e v - d 20mhz t3 xxx t able 1: idd (without load) frequency f=< 10mhz 20mhz 40mhz v=vdd = 3.3v < 4ma < 5ma < 20ma a unique part number will be generated for each product specifcation 20xxxx-ea00 xxx pcs ( in esd plastic tray) 200xxx-ml00 xxx pcs ( in tape & reel, any quantity)
|
