tai-saw technology co., ltd. fr-71s03-02 tst dcc release document tai-saw technology co., ltd. no. 3, industrial 2nd rd., ping-chen industrial district, taoyuan, 324, taiwan, r.o.c. tel: 886-3-4690038 fax: 886-3-4697532 e-mail: tstsales@mail.taisaw.com web: www.taisaw.com product specifications approval sheet product name: saw filter 869.225 mh z (bw 1.85mhz) smd 2.0x1.6 mm tst parts no.: TA1810A customer parts no.: company: division: approved by : date: checked by: michael yang approval by: bob chau date: 2015/7/1 1. customer signed back is required before tst c an proceed with sample build and receive orders. 2. orders received without customer signed back will be regarded as agreemen t on the specifications. 3. any specifications changes must be approved upon by both parties and a new revision of specifications shall be released to reflect the changes
tai-saw technology co., ltd. 2 tst dcc release document tai-saw technology co., ltd. no. 3, industrial 2nd rd., ping-chen industrial district, taoyuan, 324, taiwan, r.o.c. tel: 886-3-4690038 fax: 886-3-4697532 e-mail: tstsales@mail.taisaw.com web: www.taisaw.com saw filter 869.225mhz model no.:TA1810A rev. no.:1.0 a. maximum rating: 1. input power level: 20 dbm 2. dc voltage : 5v 3. operating temperat ure: -40c to +85c 4. storage temperatur e: -40c to +85c b. electrical characteristics : terminating source/load impedance (single) : zs = 50 /z l = 50 test temperature25c item unit min type. max center frequency fc mhz - 869.225 - minimum insertion los s min 3.0 3.5 pass band (relative to min) insertion loss (868.3~870.15 mhz) il db 3.0 5.0 v swr (868.3~870.15 mhz) 1.3 2.0 amplitude ripple (868.3~870.15 mhz) db 1.0 2.0 attenuation 50 ~ 791 mhz db 45 50 791 ~ 848 mhz db 35 40 848 ~ 862 mhz db 35 40 880 ~ 883 mhz db 35 40 883 ~ 1000 mhz db 45 50 c.. test circuit: rohs compliant lead free lead-free soldering e lectrostatic s ensitive d evice ( esd )
tai-saw technology co., ltd. 3 tst dcc release document d. frequency characteristics : s21 response: (span 100mhz) s21 response: (span 10mhz)
tai-saw technology co., ltd. 4 tst dcc release document e.outline drawing: date code see the table wk 01 02 26 27 28 52 code a b zab?z ? year code see the table year 2008 2009 2010 2011 2019 2020 code 8 9 0 1 9 0
tai-saw technology co., ltd. 5 tst dcc release document f. packing: 1. reel dimension 2. tape dimension
tai-saw technology co., ltd. 6 tst dcc release document g. recommended reflow profile : 1. preheating shall be fixed at 150~180 for 60~90 seconds. 2. ascending time to preheating temperature 150 shall be 30 seconds min. 3. heating shall be fixed at 220 for 50~80 seconds and at 260 +0/-5 peak (20~40sec). 4. time: 2 times.
|
