thread size body gland nut sealing o ring part number colour: grey ral 7035 special order nafta part number colour: black ral 9005 special order eu thread size cable diameter suggested clearance hole for non threaded mounting "l" 0.5[.020] "sw-1" 0.5[.020] "h" max ref installation torque** min max cg-pg7-1 cg-pg7-1-bk pg7 2[.079] 5[.197] 12.7[.500] 8[.315] 15[.591] 30.5[1.201] 0.7 cg-pg7-2 cg-pg7-2-bk 3[.118] 6.5[.256] CG-PG9-1 CG-PG9-1-bk pg9 2[.079] 6[.236] 15.4[.606] 19[.748] 34[1.339] 2.2 cg-pg9-2 cg-pg9-2-bk 4[.157] 8[.315] cg-pg11-1 cg-pg11-1-bk pg11 3[.118] 7[.276] 18.8[.740] 22[.866] 37[1.457] cg-pg11-2 cg-pg11-2-bk 5[.197] 10[.394] cg-pg13.5-1 cg-pg13.5-1-bk pg13.5 6[.236] 12[ .472] 20.7[.815] 9[.354] 24[.945] 39[1.535] 2.7 cg-pg16-1 cg-pg16-1-bk pg16 10[.394] 14[. 551] 22.8[.898] 10[.394] 27[ 1.063] 42.5[1.673] 3.0 cg-pg21-1 cg-pg21-1-bk pg21 9[.236] 16[.630] 28.6[1.126] 11[.433] 33[1.299] 47.5[1.870] 5.0 cg-pg21-2 cg-pg21-2-bk 13[.512] 18[.709] cg-pg29-1 cg-pg29-1-bk pg29 12[. 472] 20[.787] 37.4[1.472] 42[1.654] 53[2.087] 7.5 cg-pg36-1 cg-pg36-1-bk pg36 20[.787] 26[1.024] 47.5[1.870] 13[.512] 53[2.087] 61[2.402] cg-pg36-2 cg-pg36-2-bk 22[.866] 32[1.260] o ring included with threads pg29 and pg36 **tested with specified test mandrels according din en 50262, chapter 5.7. depending on the cable construction differences are possible. protection grade ip68 - 5 bar alternate units for reference only notes: temperature range -20 c to +100 c #e336396 co2011029 14/12/10 27/07/11 co2011176 04 2 3 4 a b 1 c b a d 03 sf a4 sheet size body and nut: see table www.richco-inc.com reproduced in whole or part without their written consent. drn material: description: 3 chkd date scale drg no: sheet no. date c 1 of 1 09/04/09 cable glands - pg type mt colour: tc 08/10/09 nts rev. modification. date drn 01 08/10/09 mt d e third 2 02 co2010958 15/07/10 richco international co. ltd. and may not be disclosed or mt richco, inc. o ring - nbr (rms-041) production release 4 09-109 npr no: eu09-0034 1 e f information contained in this document is confidential to part no: cg-pgxx-x 1 angle form no. 0143/00 seal: grey, o ring: black all dimensions in mm[inch] general tolerances unless otherwise stated 1 decimal place 2 decimal places angular body and nut - nylon 6 ul94 v-2 (rms-036) sealing gland - cr/nbr (rms-037) sf " "l "h" max ref "sw-1"
|