View TPS3800-XX-17_9070333.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

tps3800-xx tps3801-xx tps3802-xx www.ti.com slvs219e ? august 1999 ? revised october 2010 ultra-small supply voltage supervisors check for samples: tps3800-xx , tps3801-xx , tps3802-xx 1 features description 2 ? small, 5-pin sc-70 (sot-323) package ? supply current of 9 m a the tps380x family of supervisory circuits monitor supply voltages to provide circuit initialization and ? power-on reset generator with fixed delay timing supervision, primarily for dsps and other time processor-based systems. ? tps3800 = 100 ms these devices assert a push-pull reset signal when ? tps3801 = 200 ms the sense (adjustable version) or v dd (fixed version) ? tps3802 = 400 ms drops below a preset threshold. the reset output remains asserted for the factory programmed delay ? precision supply voltage monitor 1.8 v, 2.5 v, time after the sense or v dd return above its 2.7 v, 3 v, 3.3 v, 5 v, and adjustable threshold. ? manual reset input (except tps3801-01) the tps380x devices, except the tps3801-01, ? temperature range: ? 40 c to +85 c incorporate a manual reset input ( mr). a low level at mr causes reset to become active. applications the tps380x uses a precision reference to achieve ? applications using dsps, microcontrollers, or an overall threshold accuracy of 2% ? 2.5%. these microprocessors devices are available in a 5-pin sc-70 package, ? wireless communication systems which is only about half the size of a 5-pin sot-23 ? portable/battery-powered equipment package. ? programmable controls the tps380x devices are fully specified over a ? intelligent instruments temperature range of ? 40 c to +85 c. ? industrial equipment ? notebook/desktop computers ? automotive systems 1 please be aware that an important notice concerning availability, standard warranty, and use in critical applications of texas instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. 2 all trademarks are the property of their respective owners. production data information is current as of publication date. copyright ? 1999 ? 2010, texas instruments incorporated products conform to specifications per the terms of the texas instruments standard warranty. production processing does not necessarily include testing of all parameters. 3 2 4 5 tps380x . . . dck package (top view) 1 reset gnd mr v dd gnd 3 2 4 5 tps3801?01 . . . dck package (top view) 1 reset gnd sensev dd gnd v dd = 1.8 v 100 nf tps3801e18 tms320vc5420 gnd gnd mr reset reset corev dd v dd
tps3800-xx tps3801-xx tps3802-xx slvs219e ? august 1999 ? revised october 2010 www.ti.com these devices have limited built-in esd protection. the leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the mos gates. available options (1) t a device name threshold voltage typ delay time marking tps3801-01dck adjustable (v ref = 1.14 v) 200 ms arf tps3801e18dck 1.71 v 200 ms are tps3801j25dck 2.25 v 200 ms nja tps3800g27dck 2.5 v 95 ms ari tps3801l30dck 2.64 v 200 ms npa ? 40 c to 85 c tps3801k33dck 2.93 v 200 ms nwa tps3802l30dck 2.64 v 380 ms asa tps3802k33dck 2.93 v 380 ms ark tps3801t50dck 4.00 v 25 ms avi tps3801i50dck 4.55 v 200 ms nsa (1) for the most current package and ordering information, see the package option addendum at the end of this data sheet, or refer to our web site at www.ti.com . absolute maximum ratings (1) (2) over operating free-air temperature range (unless otherwise noted). unit supply voltage, v dd 7 v sense ? 0.3 v to 5 v all other pins ? 0.3 v to 7 v mr ? 0.3 v to v dd + 0.3 v reset ? 0.3 v to v dd + 0.3 v maximum low-output current, i ol 5 ma maximum high-output current, i oh ? 5 ma input-clamp current, i ik (v i < 0 or v i > v dd ) 20 ma output-clamp current, i ok (v o < 0 or v o > v dd ) 20 ma operating junction temperature range, t j (3) ? 40 c to +85 c storage temperature range, t stg ? 65 c to +150 c (1) stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. these are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. (2) all voltage values are with respect to gnd. for reliable operation, the device should not be operated at 7 v for more than t = 1000h continuously. (3) due to the low dissipation power of this device, it is assumed that t j = t a . recommended operating conditions min max unit tps3801j25, tps3801l30, tps3801k33, tps3801i50, tps3801t50 2 6 supply voltage, v dd v all other devices 1.6 4 sense 0 see (1) v input voltage, v i 0 v dd +0.3 v high-level input voltage, v ih 0.7 v dd v dd +0.3 v low-level input voltage, v il 0.3 v dd v input transition rise and fall rate at mr, t/ v 100 ns/v v pull-up pull-up resistor value, reset 50 a operating free-air temperature range, t a ? 40 +85 c (1) maximum = v dd + 0.3 or 4.5 v, whichever is greater. 2 submit documentation feedback copyright ? 1999 ? 2010, texas instruments incorporated product folder link(s): tps3800-xx tps3801-xx tps3802-xx
tps3800-xx tps3801-xx tps3802-xx www.ti.com slvs219e ? august 1999 ? revised october 2010 electrical characteristics over ? 40 c to +85 c free-air temperature range (unless otherwise noted). tps3800-xx, tps3801-xx, tps3802-xx parameter test conditions min typ max unit v dd = 1.6 v to 6 v i oh = ? 500 m a v dd ? 0.2 v oh high-level output voltage ( reset) v dd = 3.3 v i oh = ? 2 ma v dd ? 0.4 v v dd = 6 v i oh = ? 4 ma (1) v dd ? 0.4 v dd = 1.6 v to 6 v, i ol = 500 m a 0.2 v ol low-level output voltage ( reset) v dd = 3.3 v, i ol = 2 ma 0.4 v v dd = 6 v, i ol = 4 ma (1) 0.4 power-up reset voltage (2) v dd 1.1 v, i ol = 50 m a 0.2 v tps380x-01 1.117 1.14 1.163 tps380xe18 1.67 1.71 1.75 tps380xj25 2.2 2.25 2.3 tps380xg27 2.45 2.5 2.55 negative-going input v it ? t a = ? 40 c to 85 c v threshold voltage (3) tps380xl30 2.58 2.64 2.7 tps380xk33 2.87 2.93 2.99 tps380xi50 4.45 4.55 4.65 tps380xt50 3.92 4 4.08 tps380x-01 15 tps380xx18 25 tps380xx25 30 v hys threshold hysteresis tps380xx27 35 mv tps380xx30 35 tps380xx33 40 tps380xx50 60 i ih high-level input current ( mr) mr = 0.7 v dd , v dd = 6 v ? 40 ? 60 ? 100 m a i il low-level input current ( mr) mr = 0 v, v dd = 6 v ? 130 ? 200 ? 340 i i input current (sense) ? 25 25 na tps3801j25, v dd = 2 v, mr and output 9 12 tps3801l30, unconnected tps3801k33, v dd = 6 v, mr and output tps3801i50, 20 25 unconnected tps3801t50 v dd = 1.6 v, sense = 0 v to v dd , 7 10 output unconnected i dd supply current m a tps3801-01 v dd = 4 v, sense = 0 v to v dd , 9 12 output unconnected v dd = 1.6 v, mr and output tps3801e18, 8 11 unconnected tps3800g27, tps3802k33, v dd = 4 v, mr and output 13 18 tps3802l30 unconnected c i input capacitance v i = 0 v to v dd 5 pf (1) only valid for the tps3801j25, tps3801l30, tps3801k33, tps3801i50, and tps3801t50. (2) the lowest supply voltage at which reset becomes active. t r, vdd 15 m s/v. (3) to ensure the best stability of the threshold voltage, a bypass capacitor (0.1- m f ceramic) should be placed near the supply terminals. copyright ? 1999 ? 2010, texas instruments incorporated submit documentation feedback 3 product folder link(s): tps3800-xx tps3801-xx tps3802-xx
tps3800-xx tps3801-xx tps3802-xx slvs219e ? august 1999 ? revised october 2010 www.ti.com timing requirements at r l = 1 m ? , c l = 50 pf, t a = +25 c parameter test conditions min typ max unit at sense v dd = 1.6 v, v ih = 1.1 v it ? , v il = 0.9 v it ? 1 m s t w pulse width at v dd v dd = v it ? + 0.2 v, v dd = v it ? ? 0.2 v 3 at mr v dd v it ? + 0.2 v, v il = 0.3 v dd , v ih = 0.7 v dd 100 ns switching characteristics at r l = 1 m ? , c l = 50 pf, t a = +25 c parameter test conditions min typ max unit tps3801t50 15 25 35 v dd v it ? + 0.2 v, tps3800 60 95 140 t d reset recovery delay time mr 0.7 v dd ms tps3801 120 200 280 see timing diagram tps3802 240 380 560 v dd v it ? + 0.2 v, mr to reset delay v il = 0.3 v dd , 15 ns propagation (delay) time, high-to-low-level v ih = 0.7 v dd t phl output v dd to reset delay v il = v it ? ? 0.2 v, 1 m s v ih = v it ? + 0.2 v sense to reset timing diagram note: reset should not be forced high during the power-up sequence (until v dd > 1.1 v). 4 submit documentation feedback copyright ? 1999 ? 2010, texas instruments incorporated product folder link(s): tps3800-xx tps3801-xx tps3802-xx t d t v dd ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? v (nom) v it 1.1 v mr 10 1 0 tt undefined behavior of reset output for v dd < 1.1 v reset t d t d
tps3800-xx tps3801-xx tps3802-xx www.ti.com slvs219e ? august 1999 ? revised october 2010 functional block diagrams figure 1. figure 2. copyright ? 1999 ? 2010, texas instruments incorporated submit documentation feedback 5 product folder link(s): tps3800-xx tps3801-xx tps3802-xx function/truth t able, tps380x l reset h l l 0 v dd >v it 1 0 1 l mr h h l _+ sense reset tps3801?01 oscillator reference voltage of 1.14 v reset logic + timer v dd device supply voltage v dd v dd 30 k w r2 _+ r1 v dd gnd reset mr tps380x oscillator reference voltage of 1.14 v reset logic + timer
tps3800-xx tps3801-xx tps3802-xx slvs219e ? august 1999 ? revised october 2010 www.ti.com typical characteristics spacer low-level output voltage supply current vs vs low-level output current supply voltage figure 3. figure 4. high-level output voltage high-level output voltage vs vs high-level output current high-level output current figure 5. figure 6. 6 submit documentation feedback copyright ? 1999 ? 2010, texas instruments incorporated product folder link(s): tps3800-xx tps3801-xx tps3802-xx 0.00 0.25 0.50 0.75 1.00 1.25 1.50 1.75 2.00 2.25 2.50 2.75 3.00 i oh ? high-level output current ? ma v dd = 2.5 v mr = open t a = 85 c 0 ?2 ?4 ?6 ?8 ?10 v oh ? high-level output v oltage ? v t a = -40 c t a = 25 c t a = 0 c ?50 ?40 ?30 ?20 ?10 0 10 20 30 40 50 ?2 0 2 4 6 mr = open t a = 25 cv dd ? supply v oltage ? v dd i supply current ? ? a m tps3801j25 0.00 0.25 0.50 0.75 1.00 1.25 1.50 1.75 2.00 2.25 2.50 2.75 0.0 2.5 5.0 7.5 10.0 12.5 v dd = 2.5 v mr = open t a = 85 c t a = -40 c i ol ? low-level output current ? ma ol v ? low-level output v oltage ? v t a = 25 c t a = 0 c 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 i oh ? high-level output current ? ma v dd = 6.0 v mr = open t a = 85 c 0 ?10 ?20 ?30 ?40 ?50 v oh ? high-level output v oltage ? v t a = -40 c t a = 0 c t a = 25 c
tps3800-xx tps3801-xx tps3802-xx www.ti.com slvs219e ? august 1999 ? revised october 2010 typical characteristics (continued) spacer spacer input current minimum pulse duration at v dd vs vs input voltage at mr v dd threshold overdrive voltage figure 7. figure 8. normalized input threshold voltage normalized input threshold voltage vs vs free-air temperature at v dd free-air temperature at v dd figure 9. figure 10. copyright ? 1999 ? 2010, texas instruments incorporated submit documentation feedback 7 product folder link(s): tps3800-xx tps3801-xx tps3802-xx mr = open 1.5 1 0.5 0 0 0.2 0.4 0.6 2 3 3.5 0.8 1 2.5 v dd threshold overdrive v oltage ? v ? minimum pulse duration at m s v dd ? t w ?500 ?400 ?300 ?200 ?100 0 100 ?2 0 2 4 6 v dd = 6 v t a = 25 c v i ? input v oltage at mr ? v ? input current ? a i i m 0.988 0.990 0.992 0.994 0.996 0.998 1 1.002 1.004 1.006 ?40 ?20 0 20 40 60 80 tps3801?01tps3801e18 tps3800 tps3802 ? normalized input threshold v oltage ? v v it t a ? free-air t emperature at v dd ? c 0.995 0.996 0.997 0.998 0.999 1.000 1.001 t a ? free-air t emperature at v dd ? c ?40 ?20 0 20 40 normalized input threshold v oltage 60 85 mr = open c v it (t a )/ v it (25 ) tps3801s25tps3801l30 tps3801k33 tps3801i50 tps3801t50
tps3800-xx tps3801-xx tps3802-xx slvs219e ? august 1999 ? revised october 2010 www.ti.com changes from revision d (december 2006) to revision e page ? added pull-up resistor value, reset to the recommended operating conditions table .................................................. 2 8 submit documentation feedback copyright ? 1999 ? 2010, texas instruments incorporated product folder link(s): tps3800-xx tps3801-xx tps3802-xx
package option addendum www.ti.com 15-apr-2017 addendum-page 1 packaging information orderable device status (1) package type package drawing pins package qty eco plan (2) lead/ball finish (6) msl peak temp (3) op temp (c) device marking (4/5) samples hpa00763dckr active sc70 dck 5 3000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 arf tps3800g27dckr active sc70 dck 5 3000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 ari tps3800g27dckrg4 active sc70 dck 5 3000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 ari tps3801-01dckr active sc70 dck 5 3000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 arf tps3801-01dckrg4 active sc70 dck 5 3000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 arf tps3801e18dckr active sc70 dck 5 3000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 are tps3801i50dckr active sc70 dck 5 3000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 nsa tps3801i50dckrg4 active sc70 dck 5 3000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 nsa tps3801j25dckr active sc70 dck 5 3000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 nja tps3801j25dckrg4 active sc70 dck 5 3000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 nja tps3801k33dckr active sc70 dck 5 3000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 nwa tps3801k33dckrg4 active sc70 dck 5 3000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 nwa tps3801l30dckr active sc70 dck 5 3000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 npa tps3801l30dckrg4 active sc70 dck 5 3000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 npa tps3801t50dckr active sc70 dck 5 3000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 avi tps3801t50dckrg4 active sc70 dck 5 3000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 avi tps3802k33dckr active sc70 dck 5 3000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 ark
package option addendum www.ti.com 15-apr-2017 addendum-page 2 orderable device status (1) package type package drawing pins package qty eco plan (2) lead/ball finish (6) msl peak temp (3) op temp (c) device marking (4/5) samples tps3802l30dckr active sc70 dck 5 3000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 asa tps3802l30dckrg4 active sc70 dck 5 3000 green (rohs & no sb/br) cu nipdau level-1-260c-unlim -40 to 85 asa (1) the marketing status values are defined as follows: active: product device recommended for new designs. lifebuy: ti has announced that the device will be discontinued, and a lifetime-buy period is in effect. nrnd: not recommended for new designs. device is in production to support existing customers, but ti does not recommend using this part in a new design. preview: device has been announced but is not in production. samples may or may not be available. obsolete: ti has discontinued the production of the device. (2) eco plan - the planned eco-friendly classification: pb-free (rohs), pb-free (rohs exempt), or green (rohs & no sb/br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. tbd: the pb-free/green conversion plan has not been defined. pb-free (rohs): ti's terms "lead-free" or "pb-free" mean semiconductor products that are compatible with the current rohs requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. where designed to be soldered at high temperatures, ti pb-free products are suitable for use in specified lead-free processes. pb-free (rohs exempt): this component has a rohs exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. the component is otherwise considered pb-free (rohs compatible) as defined above. green (rohs & no sb/br): ti defines "green" to mean pb-free (rohs compatible), and free of bromine (br) and antimony (sb) based flame retardants (br or sb do not exceed 0.1% by weight in homogeneous material) (3) msl, peak temp. - the moisture sensitivity level rating according to the jedec industry standard classifications, and peak solder temperature. (4) there may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) multiple device markings will be inside parentheses. only one device marking contained in parentheses and separated by a "~" will appear on a device. if a line is indented then it is a continuation of the previous line and the two combined represent the entire device marking for that device. (6) lead/ball finish - orderable devices may have multiple material finish options. finish options are separated by a vertical ruled line. lead/ball finish values may wrap to two lines if the finish value exceeds the maximum column width. important information and disclaimer: the information provided on this page represents ti's knowledge and belief as of the date that it is provided. ti bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. efforts are underway to better integrate information from third parties. ti has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. ti and ti suppliers consider certain information to be proprietary, and thus cas numbers and other limited information may not be available for release. in no event shall ti's liability arising out of such information exceed the total purchase price of the ti part(s) at issue in this document sold by ti to customer on an annual basis.
package option addendum www.ti.com 15-apr-2017 addendum-page 3
tape and reel information *all dimensions are nominal device package type package drawing pins spq reel diameter (mm) reel width w1 (mm) a0 (mm) b0 (mm) k0 (mm) p1 (mm) w (mm) pin1 quadrant tps3800g27dckr sc70 dck 5 3000 178.0 9.0 2.4 2.5 1.2 4.0 8.0 q3 tps3800g27dckr sc70 dck 5 3000 180.0 8.4 2.41 2.41 1.2 4.0 8.0 q3 tps3801-01dckr sc70 dck 5 3000 178.0 9.0 2.4 2.5 1.2 4.0 8.0 q3 tps3801-01dckr sc70 dck 5 3000 180.0 8.4 2.41 2.41 1.2 4.0 8.0 q3 tps3801e18dckr sc70 dck 5 3000 180.0 8.4 2.41 2.41 1.2 4.0 8.0 q3 tps3801e18dckr sc70 dck 5 3000 178.0 9.0 2.4 2.5 1.2 4.0 8.0 q3 tps3801i50dckr sc70 dck 5 3000 180.0 8.4 2.41 2.41 1.2 4.0 8.0 q3 tps3801j25dckr sc70 dck 5 3000 180.0 8.4 2.41 2.41 1.2 4.0 8.0 q3 tps3801k33dckr sc70 dck 5 3000 180.0 8.4 2.41 2.41 1.2 4.0 8.0 q3 tps3801k33dckr sc70 dck 5 3000 178.0 9.0 2.4 2.5 1.2 4.0 8.0 q3 tps3801l30dckr sc70 dck 5 3000 180.0 8.4 2.41 2.41 1.2 4.0 8.0 q3 tps3801t50dckr sc70 dck 5 3000 178.0 9.0 2.4 2.5 1.2 4.0 8.0 q3 tps3801t50dckr sc70 dck 5 3000 180.0 8.4 2.41 2.41 1.2 4.0 8.0 q3 tps3802k33dckr sc70 dck 5 3000 178.0 9.0 2.4 2.5 1.2 4.0 8.0 q3 tps3802k33dckr sc70 dck 5 3000 180.0 8.4 2.41 2.41 1.2 4.0 8.0 q3 tps3802l30dckr sc70 dck 5 3000 178.0 9.0 2.4 2.5 1.2 4.0 8.0 q3 tps3802l30dckr sc70 dck 5 3000 180.0 8.4 2.41 2.41 1.2 4.0 8.0 q3 package materials information www.ti.com 22-dec-2016 pack materials-page 1
*all dimensions are nominal device package type package drawing pins spq length (mm) width (mm) height (mm) tps3800g27dckr sc70 dck 5 3000 180.0 180.0 18.0 tps3800g27dckr sc70 dck 5 3000 202.0 201.0 28.0 tps3801-01dckr sc70 dck 5 3000 180.0 180.0 18.0 tps3801-01dckr sc70 dck 5 3000 202.0 201.0 28.0 tps3801e18dckr sc70 dck 5 3000 202.0 201.0 28.0 tps3801e18dckr sc70 dck 5 3000 180.0 180.0 18.0 tps3801i50dckr sc70 dck 5 3000 202.0 201.0 28.0 tps3801j25dckr sc70 dck 5 3000 202.0 201.0 28.0 tps3801k33dckr sc70 dck 5 3000 202.0 201.0 28.0 tps3801k33dckr sc70 dck 5 3000 180.0 180.0 18.0 tps3801l30dckr sc70 dck 5 3000 202.0 201.0 28.0 tps3801t50dckr sc70 dck 5 3000 180.0 180.0 18.0 tps3801t50dckr sc70 dck 5 3000 202.0 201.0 28.0 tps3802k33dckr sc70 dck 5 3000 180.0 180.0 18.0 tps3802k33dckr sc70 dck 5 3000 202.0 201.0 28.0 tps3802l30dckr sc70 dck 5 3000 180.0 180.0 18.0 tps3802l30dckr sc70 dck 5 3000 202.0 201.0 28.0 package materials information www.ti.com 22-dec-2016 pack materials-page 2

important notice texas instruments incorporated (ti) reserves the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per jesd46, latest issue, and to discontinue any product or service per jesd48, latest issue. buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. ti ? s published terms of sale for semiconductor products ( http://www.ti.com/sc/docs/stdterms.htm ) apply to the sale of packaged integrated circuit products that ti has qualified and released to market. additional terms may apply to the use or sale of other types of ti products and services. reproduction of significant portions of ti information in ti data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. ti is not responsible or liable for such reproduced documentation. information of third parties may be subject to additional restrictions. resale of ti products or services with statements different from or beyond the parameters stated by ti for that product or service voids all express and any implied warranties for the associated ti product or service and is an unfair and deceptive business practice. ti is not responsible or liable for any such statements. buyers and others who are developing systems that incorporate ti products (collectively, ? designers ? ) understand and agree that designers remain responsible for using their independent analysis, evaluation and judgment in designing their applications and that designers have full and exclusive responsibility to assure the safety of designers ' applications and compliance of their applications (and of all ti products used in or for designers ? applications) with all applicable regulations, laws and other applicable requirements. designer represents that, with respect to their applications, designer has all the necessary expertise to create and implement safeguards that (1) anticipate dangerous consequences of failures, (2) monitor failures and their consequences, and (3) lessen the likelihood of failures that might cause harm and take appropriate actions. designer agrees that prior to using or distributing any applications that include ti products, designer will thoroughly test such applications and the functionality of such ti products as used in such applications. ti ? s provision of technical, application or other design advice, quality characterization, reliability data or other services or information, including, but not limited to, reference designs and materials relating to evaluation modules, (collectively, ? ti resources ? ) are intended to assist designers who are developing applications that incorporate ti products; by downloading, accessing or using ti resources in any way, designer (individually or, if designer is acting on behalf of a company, designer ? s company) agrees to use any particular ti resource solely for this purpose and subject to the terms of this notice. ti ? s provision of ti resources does not expand or otherwise alter ti ? s applicable published warranties or warranty disclaimers for ti products, and no additional obligations or liabilities arise from ti providing such ti resources. ti reserves the right to make corrections, enhancements, improvements and other changes to its ti resources. ti has not conducted any testing other than that specifically described in the published documentation for a particular ti resource. designer is authorized to use, copy and modify any individual ti resource only in connection with the development of applications that include the ti product(s) identified in such ti resource. no other license, express or implied, by estoppel or otherwise to any other ti intellectual property right, and no license to any technology or intellectual property right of ti or any third party is granted herein, including but not limited to any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which ti products or services are used. information regarding or referencing third-party products or services does not constitute a license to use such products or services, or a warranty or endorsement thereof. use of ti resources may require a license from a third party under the patents or other intellectual property of the third party, or a license from ti under the patents or other intellectual property of ti. ti resources are provided ? as is ? and with all faults. ti disclaims all other warranties or representations, express or implied, regarding resources or use thereof, including but not limited to accuracy or completeness, title, any epidemic failure warranty and any implied warranties of merchantability, fitness for a particular purpose, and non-infringement of any third party intellectual property rights. ti shall not be liable for and shall not defend or indemnify designer against any claim, including but not limited to any infringement claim that relates to or is based on any combination of products even if described in ti resources or otherwise. in no event shall ti be liable for any actual, direct, special, collateral, indirect, punitive, incidental, consequential or exemplary damages in connection with or arising out of ti resources or use thereof, and regardless of whether ti has been advised of the possibility of such damages. unless ti has explicitly designated an individual product as meeting the requirements of a particular industry standard (e.g., iso/ts 16949 and iso 26262), ti is not responsible for any failure to meet such industry standard requirements. where ti specifically promotes products as facilitating functional safety or as compliant with industry functional safety standards, such products are intended to help enable customers to design and create their own applications that meet applicable functional safety standards and requirements. using products in an application does not by itself establish any safety features in the application. designers must ensure compliance with safety-related requirements and standards applicable to their applications. designer may not use any ti products in life-critical medical equipment unless authorized officers of the parties have executed a special contract specifically governing such use. life-critical medical equipment is medical equipment where failure of such equipment would cause serious bodily injury or death (e.g., life support, pacemakers, defibrillators, heart pumps, neurostimulators, and implantables). such equipment includes, without limitation, all medical devices identified by the u.s. food and drug administration as class iii devices and equivalent classifications outside the u.s. ti may expressly designate certain products as completing a particular qualification (e.g., q100, military grade, or enhanced product). designers agree that it has the necessary expertise to select the product with the appropriate qualification designation for their applications and that proper product selection is at designers ? own risk. designers are solely responsible for compliance with all legal and regulatory requirements in connection with such selection. designer will fully indemnify ti and its representatives against any damages, costs, losses, and/or liabilities arising out of designer ? s non- compliance with the terms and provisions of this notice. mailing address: texas instruments, post office box 655303, dallas, texas 75265 copyright ? 2017, texas instruments incorporated

▲Up To Search▲

Price & Availability of TPS3800-XX-17

	To Download TPS3800-XX-17 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .