View HT-102RP34L-SC1-212_9078604.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. 2018.7 w small i/o connectors for ac adapters rp34 series features 1. superior mating operability a snap-and-lock style allows easy mating/ unmating. 2. cable direction is variable the three-position, right-angled plug makes it possible to arrange the cable to the left or right, offering flexible wiring options depending on your requirement. 3. sequential contact mating designed with sequential contact mating, one pin makes contact with its counterpart sooner than the others and establishes a securely grounded connection. 4. easy plug assembly a snap-together case eliminates the need for screws to fasten the case and helps provide for a quick plug assembly. 5. variations items number of contacts 3 or, 4 connector type plug : straight, right angle receptacle : right angle plug termination version crimp receptacle termination version pcb dip receptacle mounting method pcb dip product speci cations ratings rated current 3a operating temperature range -10 to +60 ? rated voltage ac30v , dc42v storage temperature range -10 to +60 ? items speci cations conditions 1. contact resistance 30m?max measured at dc 1a 2. insulation resistance 1,000m?min measured at dc 100v 3. withstanding voltage no ashover or dielectric breakdown. ac 150v for 1 minute 4. vibration resistance no electrical discontinuity for 10? or longer. 10 to 55hz/cycle, amplitude : 0.75mm, 3 axis directions, 2 hours each 5. shock resistance no electrical discontinuity for 10? or longer. acceleration : 490m/s 2 , duration : 11ms, 3 axis directions, 3 cycles each 6. mating cycles contact resistance : 60m?max. 1,000 times 7. temperature cycle insulation resistance : 100m?min. -55? : 30 minutes ? normal temperature : 10 to 15 minutes ? 85? : 30 minutes ? normal temperature : 10 to 15 minutes, left for 5 cycles 8. moisture resistance insulation resistance: 10m?min (at high humidities). 100m?min (when dry). temperature : 40?, relative humidity : 90 to 95%, left for 96 hours materials / finish items material finish remarks plug exterior, insulator polycarbonate resin ???? ul94v-0 clamp brass ???? ???? bushing vinyl chloride resin ???? ???? receptacle exterior, insulator pbt resin ???? ul94v-0 steel tin plating ???? male contact brass silver plating ???? crimped female contact female contact phosphor bronze silver plating ???? 1 in cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information. model name : rp34 series shell size : the shell size is the outer diameter of the mating end of the plug. shell type sp : straight plug p : right-angled plug r : receptacle number of contacts : contact form p : male contact s : female contact contact termination method : c : crimp contact termination dl : right-angled dip method other speci cations : a two-digit character is added to indicate other speci cations. model name : rp34 series contact type : sc = crimped female contact contact packaging types : 1 : loose piece contacts 2 : reel contacts applicable wire : 1 : for 18 to 22 awg 2 : for 24 to 28 awg identi cation of plating : 2 : silver plating product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. connector crimp contact rp34 - 8sp - 3 s c (71) rp34 - sc - 212 2 rp34 series small plastic connectors for ac adapters (this figure is a representative example.) (this gure is a representative example.) part no. hrs no. rp34-8p-3sc(71) 113-5041-0 71 note : cable clamping force, cable rotation force, and other aspects may differ depending on the cable construction. we recommend that you verify the suitability of the cable assembly before use or production. part no. hrs no. no. of contacts a remarks rp34-8sp-3sc(71) 113-5049-1 71 3 9.6 ???? rp34-8sp-3scd(71) 113-5061-7 71 mating key dependent type rp34-8sp-4sc(71) 113-5097-4 71 4 11 ???? note : cable clamping force, cable rotation force, and other aspects may differ depending on the cable construction. we reccomend that you verify the suitability of the cable assembly before use or production. right-angled plug straight plug rp34-8p-3sc(71) rp34-8sp-3sc(71) 32 1 ?4.4 2 10 10 18 25 7.5 18 3 2 1 ?4.4 a 10 7.5 37.5 30.5 3 rp34 series small plastic connectors for ac adapters (this figure is a representative example.) part no. hrs no. no. of contacts a b remarks rp34-8r-3pdl 113-5042-2 31011 ???? rp34-8r-3pdld 113-5066-0 mating key dependent type rp34-8r-4pdl 113-5098-7 4 11 12 ???? 3 position positioning hole (1 location) 1.9 1.9 2.75 7.4 4.75 4.75 2.1 10.5 3-?1.1 +0.1 0 +0.1 0 +0.1 0 4-?1.7 ?1.5 21 4 3 positioning hole (1 location) 4 position 5.25 5.25 4.25 5.9 0.8 0.8 2.4 2.4 2.1 10.5 ?1.5 +0.1 0 +0.1 0 +0.1 0 4-?1.7 4-?1.1 dip post arrangement for pcb layout remarks 1. the applicable pcb thickness is between 0.8 and 1.6mm. 2. a machining tolerance of ?.05 is recommended for the pcb layout. 3. the above gure shows the pcb side of the rack into which contact dip posts will be inserted. " " mark indicates the plug interface mating side. receptacle rp34-8r-3pdl part no. hrs no. b c applicable wire size remarks rp34-sc-212 113-5043-5 1.6 2.1 18 to 22 awg reel contacts rp34-sc-112 113-5076-4 1.6 2.1 18 to 22 awg loose piece contacts rp34-sc-222 113-5100-7 1.2 1.35 24 to 28 awg reel contacts rp34-sc-122 113-5102-2 1.2 1.35 24 to 28 awg loose piece contacts note : loose piece contacts are packaged 100 pcs/pack and reel contacts are available on 10,000 piece reel. please order in full quantity packs or reels. contact (female contact) a_a a a b 8.7 1.48 c 3 2 1 11.3 a 10 3 b 4 rp34 series small plastic connectors for ac adapters type items part no. hrs no. applicable contact applicable wire size machine crimping automatic crimping press cm-105c 901-0001-0 ???? ???? applicator ap105-rp34-1 901-2025-2 rp34-sc-212 18 to 22 awg ap105-rp34-2 901-2034-3 rp34-sc-222 24 to 28 awg cable crimping tool rp34-tc-01 150-0074-1 ???? ???? extraction tool rp34-sc-tp 150-0072-6 ???? ???? cable bushing metal fitting for clamping cord tube (a) or (b) s-insulation p case 2mm or more 20 2 +0.5 0 1.3 cover cord tube s-insulation p case cable crimping tool (rp34-tc-01) (the handle shape shown above is a representative example.) automatic crimping press (type cm-105c) termination procedure applicable tools straight plug rightangle plug operation procedure ? straight plug 1. first, pass the prepared cable through the bushing, and then crimp and terminate the contacts. 2. assemble the crimped and terminated contacts i nto the contact holes of the s-insulation p case. at this time, please make sure that the crimped contacts are securely engaged onto the contact holes of the s-insulation p case by lightly pulling on the cable. 3. crimp and x the metal tting for clamping with the applicable tool (rp34-tc-01). 4. assemble the s-insulation p case, metal tting for clamping, and bushing onto the cord tube (a). the s-insulation p case can be assembled in two ways, at 180?opposing angles. please make sure to select the orientation that is suitable for your purpose. 5. finally, assemble the remaining cord tube (b). the assembly has been completed. operation procedure ? right-angled plug 1. the right-angled plugs can be assembled in the same manner as the straight plugs, and the s-insulation p case can be assembled to the cord tube in one of two positions. 180?opposite each other. please make sure to select the orientation that is suitable for your purpose. 5 rp34 series small plastic connectors for ac adapters type rp34l product specifications ratings rated current 5a (when using 18 awg) operating temperature range ?25 ? to +85 ? rated voltage ac30v, dc42v storage temperature range ?10 ? to +60 ? items speci? cations conditions 1. contact resistance 30m? max. measured at dc 1a 2. insulation resistance 1,000m? min. measured at dc 100v 3. withstanding voltage no ? ashover or dielectric breakdown. ac 150v for 1 minute 4. vibration proof no electrical discontinuity 10s or longer. 10 to 55hz, half amplitude : 0.75mm, 3 axis directions, 2 hours each 5. temperature cycle insulation resistance : 100m? min -55? : 30 minutes ? normal temperature : 10 to 15 minutes ? +85? : 30 minutes ? normal temperature : 10 to 15 minutes, 5 cycles 6. corrosion resistance no corrosion that affects performance. left in 5% salt water solution for 48 hours 7. mating cycles contact resistance : 60m? max 5,000 times materials / finish items material finish remarks receptacle ? (2position) metal ? tting phosphor bronze solder plating ???? insulator polyamide resin black ul94hb contact brass palladium plating ???? plug ? (2 position) exterior vinyl chloride resin black ul94v-0 insulator polyamide resin ul94hb contact phosphor bronze silver plating ???? receptacle ? (3 position) metal ? tting phosphor bronze solder plating ???? insulator pps resin black ul94v-0 contact brass palladium plating ???? plug ? (3 position) exterior polycarbonate resin black ul94v-0 vinyl chloride resin insulator pps resin contact phosphor bronze palladium plating ???? product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. rp34l - 5pa - 2sc (****) series name : rp34l shell : indicates the shell form. type receptacle : r straight plug : pa right-angled plug : lp number of contacts : shows the number. 2 or 3 contacts. contact type pd : male contact (dip) sc : female contact (crimped) cable length : ( ****) may vary depending on the cable. 6 rp34l series small plastic connectors for ac adapters part no. hrs no. rp34l-5r-2pd(71) 113-5154-6 71 rp34l-5r-3pd(71) 113-5157-4 71 receptacle 3 position 7 9.1 5 2.5 rp34l-5r-2pd(71) rp34l-5r-3pd(71) (1.2) 1.3 0 -0.1 2.120.05 recommended panel opening dimensions (reference) pcb panel plug 7.4 +0.1 0 +0.1 0 3.9 (mating interface side) 4.30.05 4.30.05 3 40.05 4.50.05 1.150.05 2.350.05 2.350.05 2 ? ?1.5 +0.1 0 4 ? ?1.1 +0.1 0 pcb layout mounting dimensions 7.4 2.5 6.1 7 1.3 -0.1 0 recommended panel opening dimensions (reference) panel 7.5 +0.1 0 6.2 +0.1 0 (1.2) pcb (mating interface side) 3 40.05 0.20.05 1.350.05 1.350.05 3.450.05 3.450.05 2? ?1.5 +0.1 0 3? ? 1.1 +0.1 0 pcb layout dimension 2 position 2 position 3 position part no. hrs no. rp34l-5pa-2sc(1857)(71) 113-5153-3 71 rp34l-5pa-3sc(71) 113-5178-4 71 rp34l-5lp-3sc(71) 113-5161-1 71 plug rp34l-5pa-2sc(1857)(71) 1857 4.8 22.4 1800 21.5 7.6 board-in crimping contact bushing 7 9.7 6.1 7.8 ?3.5 a a_a 6 r3 single-contact shielded cable (center conductor wires: 18 awg, shielded cable: 18awg or equivalent) ?9 6 1.5 5.5 a 2.5 rp34l-5pa-3sc(71) 3.7 (external shell) 7.2 10.45 4.8 6.2 23.1 29.7 7.8 ?4.4 rp34l-5lp-3sc(71) 11.4 17.6 11 11.625 2.65 7.2 10.9 11.85 7.8 3.7 ?4.4 4.8 6.2 5.925 7 rp34l series small plastic connectors for ac adapters crimp contact rp34l-sc1-212(01) 0.3 12.7 2.2 1.6 a a section a_a part no. hrs no. rp34l-sc1-212(01) 113-5151-8 01 applicable tools type part no. hrs no. applicable contact applicable cables manual crimping tools ht-102/rp34l-sc1-212 150-0210-8 rp34l-sc1-112(01) 18 to 22 awg machine crimping automatic crimping press cm-105c 901-0001-0 -------------- -------------- applicator ap105-rp34l-sc1-212 901-2043-4 rp34l-sc1-212(01) 18 to 22 awg cable crimping tool rp34-tc-01 150-0074-1 -------------- 4 extraction tool rp6-sc-tp 150-0039-0 -------------- -------------- assembly procedure (3 position plug) straight plug s-insulation p case 5.3 (mating section) (round hole) 8 2 +0.5 0 2 1 cord tube (b) cord tube (a) bushing metal fitting for clamping cable cord tube (b) cord tube (a) (tab) right angle 11 2 s-insulation p case metal fitting for clamping 2 1 cord tube bushing metal fitting for clamping s-insulation p case cable 13.7 2 +0.5 0 1. first pass the prepared cable through the bushing, and then crimp and terminate the contacts. 2. assemble the crimped and terminated contacts into the contact holes of the s-insulation p case. at this time, please make sure that the crimped contacts are securely engaged onto the contact holes of the s-insulation p case by lightly pulling the cable. if you nd an erroneous wiring, insert the extractor (rp6-sc-tp) from the mating side to pull out the contact from the termination side, and then re- assemble. 3. crimp the metal tting for clamping with the applicable tool (rp34- tc-01). 4. align and assemble the protrusion of the s-insulation p case to the round hole of the cord tube (b). 5. attach the mating section of the metal fitting for clamping to the recess of the cord tube (b), and then assemble the bushing and metal tting for clamping onto the cord tube (b). 6. assemble the cord tube (a) onto the cord tube (b). at this time, please make sure that the four tabs of the cord tube (b) rest on the angled hole of the cord tube (a). 1. right-angled plugs can be assembled in the same manner as the straight plugs. 8 rp34l series small plastic connectors for ac adapters precautions 1. to prevent damage to the connector after mounting, make sure that it is supported with a panel or another substrate. this will prevent any type of excessive load or force on the connector. for 2 position type, please support the external shell of th e receptacle. for 3 position type, please support the external shell of the plug. y see page 3 for details on recommended panel dimensions. 2. when mated together, do not apply a load of 30 n or more on the cable in the direction indicated by the arrows. please note that an excessive tensile stress may break the connectors. (external shell) panel plug receptacle receptacle panel <2 position type> <3 position type> 3. this product series uses silver plated contacts. silver reacts easily to exposure to sulfur gas so the below conditions may cause tarnishing. y~ dusty environments y~ area with a high concentration area of gases such as sulfur dioxide gas, hydrogen sulfide gas, nitrogen dioxide gas and so on. example; in close proximity to factory exhaust, automotive emissions, etc. y~ close to heaters, or in other areas marked by extreme temperature differences or high humidity. y~ close to rubber products includes rubber adhesives. the electrical connection is not affected by tarnishing on a silver surface due to the wiping effect of the contact pins. storage packing state; packed in original packing or equivalent container temperature -10 to +60? humidity 85% max (it is recommended that the product be stored in an area of normal level of temperature and humidity, and free of any temperature fluctuation) please use this products within 6 months of delivery. (after 6 month, please check the solderbility before use) ?torage?means long-term storage of the unused products in sealed packaging, prior to assembly to pcb. 9 rp34l series small plastic connectors for ac adapters memo : 10 rp34 series small plastic connectors for ac adapters memo : 11 rp34 series small plastic connectors for ac adapters 12 rp34 series small plastic connectors for ac adapters the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 07/2018. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? usa: hirose electric (u.s.a.), inc. san jose office 2841 junction ave, suite 200 san jose, ca. 95134 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. detroit office (automotive) 17197 n. laurel park drive, suite 253, livonia, mi 48152 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. boston office 300 brickstone square suite 201, andover, ma 01810 phone : +1-978-662-5255 usa: hirose electric (u.s.a.), inc. headquarters chicago office 2300 warrenville road, suite 150, downers grove, il 60515 phone : +1-630-282-6700 http://www.hirose.com/us/ china: hirose electric (china) co., ltd. shenzhen branch room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose.com/cn/ korea: hirose korea co.,ltd. 143, gongdan 1-daero, siheung-si, gyeonggi-do, 15084, korea phone : +82-31-496-7000 fax : +82-31-496-7100 http://www.hirose.co.kr/ germany: hirose electric europe b.v. nuremberg office neumeyerstrasse 22-26, 90411 nurnberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ germany: hirose electric europe b.v. hanover office bayernstr. 3, haus c 30855 langenhagen, germany phone : +49-511 97 82 61 30 fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ germany: hirose electric europe b.v. german branch schoenbergstr. 20, 73760 ostfildern phone : +49-711-456002-1 fax : +49-711-456002-299 http://www.hirose.com/eu/ france: hirose electric europe b.v. paris office 130 avenue joseph kessel, bat e, 78960 voisins le bretonneux, france phone : +33-1-85764886 fax : +33-1-85764823 http://www.hirose.com/eu/ the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hirose.com/eu/ united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 http://www.hirose.com/eu/ china: hirose electric (china) co., ltd. (shanghai, headquarters) 18, enterprise center tower 2, 209# gong he road, jing?an district, shanghai, china 200070 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose.com/cn/ china: hirose electric (china) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose.com/cn/ taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7355 http://www.hirose.com/tw/ hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose.com/hk/ india: hirose electric singapore pte. ltd. delhi liaison office office no.552, regus-green bo ulevard, level5, tower c, sec62, plot b-9a, block b, noida, 201301, uttar pradesh, india phone : +91-12-660-8018 fax : +91-120-4804949 http://www.hirose.com/sg/ singapore: hirose electric singapore pte. ltd. 03, anson road, #20-01, springleaf tower, singapore 079909 phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose.com/sg/ india: hirose electric singapore pte. ltd. bangalore liaison office unit no-403, 4th floor, no-84, barton centre, mahatma gandhi (mg) road, bangalore 560 001, karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose.com/sg/ malaysia: penang representative office 73-3-1, ideal@the one, jalan mahsuri, bayan lepas penang, 11950, malaysia phone : +604-648-5536 http://www.hirose.com/sg/ thailand: bangkok office (representative office) unit 4703, 47th fl., 1 empire tower, south sathorn road, yannawa, sathorn, bangkok 10120 thailand phone : +66-2-686-1255 fax : +66-2-686-3433 http://www.hirose.com/sg/
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. 2018.7 w small i/o connectors for ac adapters rp34 series features 1. superior mating operability a snap-and-lock style allows easy mating/ unmating. 2. cable direction is variable the three-position, right-angled plug makes it possible to arrange the cable to the left or right, offering flexible wiring options depending on your requirement. 3. sequential contact mating designed with sequential contact mating, one pin makes contact with its counterpart sooner than the others and establishes a securely grounded connection. 4. easy plug assembly a snap-together case eliminates the need for screws to fasten the case and helps provide for a quick plug assembly. 5. variations items number of contacts 3 or, 4 connector type plug : straight, right angle receptacle : right angle plug termination version crimp receptacle termination version pcb dip receptacle mounting method pcb dip product speci cations ratings rated current 3a operating temperature range -10 to +60 ? rated voltage ac30v , dc42v storage temperature range -10 to +60 ? items speci cations conditions 1. contact resistance 30m?max measured at dc 1a 2. insulation resistance 1,000m?min measured at dc 100v 3. withstanding voltage no ashover or dielectric breakdown. ac 150v for 1 minute 4. vibration resistance no electrical discontinuity for 10? or longer. 10 to 55hz/cycle, amplitude : 0.75mm, 3 axis directions, 2 hours each 5. shock resistance no electrical discontinuity for 10? or longer. acceleration : 490m/s 2 , duration : 11ms, 3 axis directions, 3 cycles each 6. mating cycles contact resistance : 60m?max. 1,000 times 7. temperature cycle insulation resistance : 100m?min. -55? : 30 minutes ? normal temperature : 10 to 15 minutes ? 85? : 30 minutes ? normal temperature : 10 to 15 minutes, left for 5 cycles 8. moisture resistance insulation resistance: 10m?min (at high humidities). 100m?min (when dry). temperature : 40?, relative humidity : 90 to 95%, left for 96 hours materials / finish items material finish remarks plug exterior, insulator polycarbonate resin ???? ul94v-0 clamp brass ???? ???? bushing vinyl chloride resin ???? ???? receptacle exterior, insulator pbt resin ???? ul94v-0 steel tin plating ???? male contact brass silver plating ???? crimped female contact female contact phosphor bronze silver plating ???? 1 in cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information. model name : rp34 series shell size : the shell size is the outer diameter of the mating end of the plug. shell type sp : straight plug p : right-angled plug r : receptacle number of contacts : contact form p : male contact s : female contact contact termination method : c : crimp contact termination dl : right-angled dip method other speci cations : a two-digit character is added to indicate other speci cations. model name : rp34 series contact type : sc = crimped female contact contact packaging types : 1 : loose piece contacts 2 : reel contacts applicable wire : 1 : for 18 to 22 awg 2 : for 24 to 28 awg identi cation of plating : 2 : silver plating product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. connector crimp contact rp34 - 8sp - 3 s c (71) rp34 - sc - 212 2 rp34 series small plastic connectors for ac adapters (this figure is a representative example.) (this gure is a representative example.) part no. hrs no. rp34-8p-3sc(71) 113-5041-0 71 note : cable clamping force, cable rotation force, and other aspects may differ depending on the cable construction. we recommend that you verify the suitability of the cable assembly before use or production. part no. hrs no. no. of contacts a remarks rp34-8sp-3sc(71) 113-5049-1 71 3 9.6 ???? rp34-8sp-3scd(71) 113-5061-7 71 mating key dependent type rp34-8sp-4sc(71) 113-5097-4 71 4 11 ???? note : cable clamping force, cable rotation force, and other aspects may differ depending on the cable construction. we reccomend that you verify the suitability of the cable assembly before use or production. right-angled plug straight plug rp34-8p-3sc(71) rp34-8sp-3sc(71) 32 1 ?4.4 2 10 10 18 25 7.5 18 3 2 1 ?4.4 a 10 7.5 37.5 30.5 3 rp34 series small plastic connectors for ac adapters (this figure is a representative example.) part no. hrs no. no. of contacts a b remarks rp34-8r-3pdl 113-5042-2 31011 ???? rp34-8r-3pdld 113-5066-0 mating key dependent type rp34-8r-4pdl 113-5098-7 4 11 12 ???? 3 position positioning hole (1 location) 1.9 1.9 2.75 7.4 4.75 4.75 2.1 10.5 3-?1.1 +0.1 0 +0.1 0 +0.1 0 4-?1.7 ?1.5 21 4 3 positioning hole (1 location) 4 position 5.25 5.25 4.25 5.9 0.8 0.8 2.4 2.4 2.1 10.5 ?1.5 +0.1 0 +0.1 0 +0.1 0 4-?1.7 4-?1.1 dip post arrangement for pcb layout remarks 1. the applicable pcb thickness is between 0.8 and 1.6mm. 2. a machining tolerance of ?.05 is recommended for the pcb layout. 3. the above gure shows the pcb side of the rack into which contact dip posts will be inserted. " " mark indicates the plug interface mating side. receptacle rp34-8r-3pdl part no. hrs no. b c applicable wire size remarks rp34-sc-212 113-5043-5 1.6 2.1 18 to 22 awg reel contacts rp34-sc-112 113-5076-4 1.6 2.1 18 to 22 awg loose piece contacts rp34-sc-222 113-5100-7 1.2 1.35 24 to 28 awg reel contacts rp34-sc-122 113-5102-2 1.2 1.35 24 to 28 awg loose piece contacts note : loose piece contacts are packaged 100 pcs/pack and reel contacts are available on 10,000 piece reel. please order in full quantity packs or reels. contact (female contact) a_a a a b 8.7 1.48 c 3 2 1 11.3 a 10 3 b 4 rp34 series small plastic connectors for ac adapters type items part no. hrs no. applicable contact applicable wire size machine crimping automatic crimping press cm-105c 901-0001-0 ???? ???? applicator ap105-rp34-1 901-2025-2 rp34-sc-212 18 to 22 awg ap105-rp34-2 901-2034-3 rp34-sc-222 24 to 28 awg cable crimping tool rp34-tc-01 150-0074-1 ???? ???? extraction tool rp34-sc-tp 150-0072-6 ???? ???? cable bushing metal fitting for clamping cord tube (a) or (b) s-insulation p case 2mm or more 20 2 +0.5 0 1.3 cover cord tube s-insulation p case cable crimping tool (rp34-tc-01) (the handle shape shown above is a representative example.) automatic crimping press (type cm-105c) termination procedure applicable tools straight plug rightangle plug operation procedure ? straight plug 1. first, pass the prepared cable through the bushing, and then crimp and terminate the contacts. 2. assemble the crimped and terminated contacts i nto the contact holes of the s-insulation p case. at this time, please make sure that the crimped contacts are securely engaged onto the contact holes of the s-insulation p case by lightly pulling on the cable. 3. crimp and x the metal tting for clamping with the applicable tool (rp34-tc-01). 4. assemble the s-insulation p case, metal tting for clamping, and bushing onto the cord tube (a). the s-insulation p case can be assembled in two ways, at 180?opposing angles. please make sure to select the orientation that is suitable for your purpose. 5. finally, assemble the remaining cord tube (b). the assembly has been completed. operation procedure ? right-angled plug 1. the right-angled plugs can be assembled in the same manner as the straight plugs, and the s-insulation p case can be assembled to the cord tube in one of two positions. 180?opposite each other. please make sure to select the orientation that is suitable for your purpose. 5 rp34 series small plastic connectors for ac adapters type rp34l product specifications ratings rated current 5a (when using 18 awg) operating temperature range ?25 ? to +85 ? rated voltage ac30v, dc42v storage temperature range ?10 ? to +60 ? items speci? cations conditions 1. contact resistance 30m? max. measured at dc 1a 2. insulation resistance 1,000m? min. measured at dc 100v 3. withstanding voltage no ? ashover or dielectric breakdown. ac 150v for 1 minute 4. vibration proof no electrical discontinuity 10s or longer. 10 to 55hz, half amplitude : 0.75mm, 3 axis directions, 2 hours each 5. temperature cycle insulation resistance : 100m? min -55? : 30 minutes ? normal temperature : 10 to 15 minutes ? +85? : 30 minutes ? normal temperature : 10 to 15 minutes, 5 cycles 6. corrosion resistance no corrosion that affects performance. left in 5% salt water solution for 48 hours 7. mating cycles contact resistance : 60m? max 5,000 times materials / finish items material finish remarks receptacle ? (2position) metal ? tting phosphor bronze solder plating ???? insulator polyamide resin black ul94hb contact brass palladium plating ???? plug ? (2 position) exterior vinyl chloride resin black ul94v-0 insulator polyamide resin ul94hb contact phosphor bronze silver plating ???? receptacle ? (3 position) metal ? tting phosphor bronze solder plating ???? insulator pps resin black ul94v-0 contact brass palladium plating ???? plug ? (3 position) exterior polycarbonate resin black ul94v-0 vinyl chloride resin insulator pps resin contact phosphor bronze palladium plating ???? product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. rp34l - 5pa - 2sc (****) series name : rp34l shell : indicates the shell form. type receptacle : r straight plug : pa right-angled plug : lp number of contacts : shows the number. 2 or 3 contacts. contact type pd : male contact (dip) sc : female contact (crimped) cable length : ( ****) may vary depending on the cable. 6 rp34l series small plastic connectors for ac adapters part no. hrs no. rp34l-5r-2pd(71) 113-5154-6 71 rp34l-5r-3pd(71) 113-5157-4 71 receptacle 3 position 7 9.1 5 2.5 rp34l-5r-2pd(71) rp34l-5r-3pd(71) (1.2) 1.3 0 -0.1 2.120.05 recommended panel opening dimensions (reference) pcb panel plug 7.4 +0.1 0 +0.1 0 3.9 (mating interface side) 4.30.05 4.30.05 3 40.05 4.50.05 1.150.05 2.350.05 2.350.05 2 ? ?1.5 +0.1 0 4 ? ?1.1 +0.1 0 pcb layout mounting dimensions 7.4 2.5 6.1 7 1.3 -0.1 0 recommended panel opening dimensions (reference) panel 7.5 +0.1 0 6.2 +0.1 0 (1.2) pcb (mating interface side) 3 40.05 0.20.05 1.350.05 1.350.05 3.450.05 3.450.05 2? ?1.5 +0.1 0 3? ? 1.1 +0.1 0 pcb layout dimension 2 position 2 position 3 position part no. hrs no. rp34l-5pa-2sc(1857)(71) 113-5153-3 71 rp34l-5pa-3sc(71) 113-5178-4 71 rp34l-5lp-3sc(71) 113-5161-1 71 plug rp34l-5pa-2sc(1857)(71) 1857 4.8 22.4 1800 21.5 7.6 board-in crimping contact bushing 7 9.7 6.1 7.8 ?3.5 a a_a 6 r3 single-contact shielded cable (center conductor wires: 18 awg, shielded cable: 18awg or equivalent) ?9 6 1.5 5.5 a 2.5 rp34l-5pa-3sc(71) 3.7 (external shell) 7.2 10.45 4.8 6.2 23.1 29.7 7.8 ?4.4 rp34l-5lp-3sc(71) 11.4 17.6 11 11.625 2.65 7.2 10.9 11.85 7.8 3.7 ?4.4 4.8 6.2 5.925 7 rp34l series small plastic connectors for ac adapters crimp contact rp34l-sc1-212(01) 0.3 12.7 2.2 1.6 a a section a_a part no. hrs no. rp34l-sc1-212(01) 113-5151-8 01 applicable tools type part no. hrs no. applicable contact applicable cables manual crimping tools ht-102/rp34l-sc1-212 150-0210-8 rp34l-sc1-112(01) 18 to 22 awg machine crimping automatic crimping press cm-105c 901-0001-0 -------------- -------------- applicator ap105-rp34l-sc1-212 901-2043-4 rp34l-sc1-212(01) 18 to 22 awg cable crimping tool rp34-tc-01 150-0074-1 -------------- 4 extraction tool rp6-sc-tp 150-0039-0 -------------- -------------- assembly procedure (3 position plug) straight plug s-insulation p case 5.3 (mating section) (round hole) 8 2 +0.5 0 2 1 cord tube (b) cord tube (a) bushing metal fitting for clamping cable cord tube (b) cord tube (a) (tab) right angle 11 2 s-insulation p case metal fitting for clamping 2 1 cord tube bushing metal fitting for clamping s-insulation p case cable 13.7 2 +0.5 0 1. first pass the prepared cable through the bushing, and then crimp and terminate the contacts. 2. assemble the crimped and terminated contacts into the contact holes of the s-insulation p case. at this time, please make sure that the crimped contacts are securely engaged onto the contact holes of the s-insulation p case by lightly pulling the cable. if you nd an erroneous wiring, insert the extractor (rp6-sc-tp) from the mating side to pull out the contact from the termination side, and then re- assemble. 3. crimp the metal tting for clamping with the applicable tool (rp34- tc-01). 4. align and assemble the protrusion of the s-insulation p case to the round hole of the cord tube (b). 5. attach the mating section of the metal fitting for clamping to the recess of the cord tube (b), and then assemble the bushing and metal tting for clamping onto the cord tube (b). 6. assemble the cord tube (a) onto the cord tube (b). at this time, please make sure that the four tabs of the cord tube (b) rest on the angled hole of the cord tube (a). 1. right-angled plugs can be assembled in the same manner as the straight plugs. 8 rp34l series small plastic connectors for ac adapters precautions 1. to prevent damage to the connector after mounting, make sure that it is supported with a panel or another substrate. this will prevent any type of excessive load or force on the connector. for 2 position type, please support the external shell of th e receptacle. for 3 position type, please support the external shell of the plug. y see page 3 for details on recommended panel dimensions. 2. when mated together, do not apply a load of 30 n or more on the cable in the direction indicated by the arrows. please note that an excessive tensile stress may break the connectors. (external shell) panel plug receptacle receptacle panel <2 position type> <3 position type> 3. this product series uses silver plated contacts. silver reacts easily to exposure to sulfur gas so the below conditions may cause tarnishing. y~ dusty environments y~ area with a high concentration area of gases such as sulfur dioxide gas, hydrogen sulfide gas, nitrogen dioxide gas and so on. example; in close proximity to factory exhaust, automotive emissions, etc. y~ close to heaters, or in other areas marked by extreme temperature differences or high humidity. y~ close to rubber products includes rubber adhesives. the electrical connection is not affected by tarnishing on a silver surface due to the wiping effect of the contact pins. storage packing state; packed in original packing or equivalent container temperature -10 to +60? humidity 85% max (it is recommended that the product be stored in an area of normal level of temperature and humidity, and free of any temperature fluctuation) please use this products within 6 months of delivery. (after 6 month, please check the solderbility before use) ?torage?means long-term storage of the unused products in sealed packaging, prior to assembly to pcb. 9 rp34l series small plastic connectors for ac adapters memo : 10 rp34 series small plastic connectors for ac adapters memo : 11 rp34 series small plastic connectors for ac adapters 12 rp34 series small plastic connectors for ac adapters the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 07/2018. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? usa: hirose electric (u.s.a.), inc. san jose office 2841 junction ave, suite 200 san jose, ca. 95134 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. detroit office (automotive) 17197 n. laurel park drive, suite 253, livonia, mi 48152 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. boston office 300 brickstone square suite 201, andover, ma 01810 phone : +1-978-662-5255 usa: hirose electric (u.s.a.), inc. headquarters chicago office 2300 warrenville road, suite 150, downers grove, il 60515 phone : +1-630-282-6700 http://www.hirose.com/us/ china: hirose electric (china) co., ltd. shenzhen branch room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose.com/cn/ korea: hirose korea co.,ltd. 143, gongdan 1-daero, siheung-si, gyeonggi-do, 15084, korea phone : +82-31-496-7000 fax : +82-31-496-7100 http://www.hirose.co.kr/ germany: hirose electric europe b.v. nuremberg office neumeyerstrasse 22-26, 90411 nurnberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ germany: hirose electric europe b.v. hanover office bayernstr. 3, haus c 30855 langenhagen, germany phone : +49-511 97 82 61 30 fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ germany: hirose electric europe b.v. german branch schoenbergstr. 20, 73760 ostfildern phone : +49-711-456002-1 fax : +49-711-456002-299 http://www.hirose.com/eu/ france: hirose electric europe b.v. paris office 130 avenue joseph kessel, bat e, 78960 voisins le bretonneux, france phone : +33-1-85764886 fax : +33-1-85764823 http://www.hirose.com/eu/ the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hirose.com/eu/ united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 http://www.hirose.com/eu/ china: hirose electric (china) co., ltd. (shanghai, headquarters) 18, enterprise center tower 2, 209# gong he road, jing?an district, shanghai, china 200070 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose.com/cn/ china: hirose electric (china) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose.com/cn/ taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7355 http://www.hirose.com/tw/ hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose.com/hk/ india: hirose electric singapore pte. ltd. delhi liaison office office no.552, regus-green bo ulevard, level5, tower c, sec62, plot b-9a, block b, noida, 201301, uttar pradesh, india phone : +91-12-660-8018 fax : +91-120-4804949 http://www.hirose.com/sg/ singapore: hirose electric singapore pte. ltd. 03, anson road, #20-01, springleaf tower, singapore 079909 phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose.com/sg/ india: hirose electric singapore pte. ltd. bangalore liaison office unit no-403, 4th floor, no-84, barton centre, mahatma gandhi (mg) road, bangalore 560 001, karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose.com/sg/ malaysia: penang representative office 73-3-1, ideal@the one, jalan mahsuri, bayan lepas penang, 11950, malaysia phone : +604-648-5536 http://www.hirose.com/sg/ thailand: bangkok office (representative office) unit 4703, 47th fl., 1 empire tower, south sathorn road, yannawa, sathorn, bangkok 10120 thailand phone : +66-2-686-1255 fax : +66-2-686-3433 http://www.hirose.com/sg/
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. 2018.7 w small i/o connectors for ac adapters rp34 series features 1. superior mating operability a snap-and-lock style allows easy mating/ unmating. 2. cable direction is variable the three-position, right-angled plug makes it possible to arrange the cable to the left or right, offering flexible wiring options depending on your requirement. 3. sequential contact mating designed with sequential contact mating, one pin makes contact with its counterpart sooner than the others and establishes a securely grounded connection. 4. easy plug assembly a snap-together case eliminates the need for screws to fasten the case and helps provide for a quick plug assembly. 5. variations items number of contacts 3 or, 4 connector type plug : straight, right angle receptacle : right angle plug termination version crimp receptacle termination version pcb dip receptacle mounting method pcb dip product speci cations ratings rated current 3a operating temperature range -10 to +60 ? rated voltage ac30v , dc42v storage temperature range -10 to +60 ? items speci cations conditions 1. contact resistance 30m?max measured at dc 1a 2. insulation resistance 1,000m?min measured at dc 100v 3. withstanding voltage no ashover or dielectric breakdown. ac 150v for 1 minute 4. vibration resistance no electrical discontinuity for 10? or longer. 10 to 55hz/cycle, amplitude : 0.75mm, 3 axis directions, 2 hours each 5. shock resistance no electrical discontinuity for 10? or longer. acceleration : 490m/s 2 , duration : 11ms, 3 axis directions, 3 cycles each 6. mating cycles contact resistance : 60m?max. 1,000 times 7. temperature cycle insulation resistance : 100m?min. -55? : 30 minutes ? normal temperature : 10 to 15 minutes ? 85? : 30 minutes ? normal temperature : 10 to 15 minutes, left for 5 cycles 8. moisture resistance insulation resistance: 10m?min (at high humidities). 100m?min (when dry). temperature : 40?, relative humidity : 90 to 95%, left for 96 hours materials / finish items material finish remarks plug exterior, insulator polycarbonate resin ???? ul94v-0 clamp brass ???? ???? bushing vinyl chloride resin ???? ???? receptacle exterior, insulator pbt resin ???? ul94v-0 steel tin plating ???? male contact brass silver plating ???? crimped female contact female contact phosphor bronze silver plating ???? 1 in cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information. model name : rp34 series shell size : the shell size is the outer diameter of the mating end of the plug. shell type sp : straight plug p : right-angled plug r : receptacle number of contacts : contact form p : male contact s : female contact contact termination method : c : crimp contact termination dl : right-angled dip method other speci cations : a two-digit character is added to indicate other speci cations. model name : rp34 series contact type : sc = crimped female contact contact packaging types : 1 : loose piece contacts 2 : reel contacts applicable wire : 1 : for 18 to 22 awg 2 : for 24 to 28 awg identi cation of plating : 2 : silver plating product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. connector crimp contact rp34 - 8sp - 3 s c (71) rp34 - sc - 212 2 rp34 series small plastic connectors for ac adapters (this figure is a representative example.) (this gure is a representative example.) part no. hrs no. rp34-8p-3sc(71) 113-5041-0 71 note : cable clamping force, cable rotation force, and other aspects may differ depending on the cable construction. we recommend that you verify the suitability of the cable assembly before use or production. part no. hrs no. no. of contacts a remarks rp34-8sp-3sc(71) 113-5049-1 71 3 9.6 ???? rp34-8sp-3scd(71) 113-5061-7 71 mating key dependent type rp34-8sp-4sc(71) 113-5097-4 71 4 11 ???? note : cable clamping force, cable rotation force, and other aspects may differ depending on the cable construction. we reccomend that you verify the suitability of the cable assembly before use or production. right-angled plug straight plug rp34-8p-3sc(71) rp34-8sp-3sc(71) 32 1 ?4.4 2 10 10 18 25 7.5 18 3 2 1 ?4.4 a 10 7.5 37.5 30.5 3 rp34 series small plastic connectors for ac adapters (this figure is a representative example.) part no. hrs no. no. of contacts a b remarks rp34-8r-3pdl 113-5042-2 31011 ???? rp34-8r-3pdld 113-5066-0 mating key dependent type rp34-8r-4pdl 113-5098-7 4 11 12 ???? 3 position positioning hole (1 location) 1.9 1.9 2.75 7.4 4.75 4.75 2.1 10.5 3-?1.1 +0.1 0 +0.1 0 +0.1 0 4-?1.7 ?1.5 21 4 3 positioning hole (1 location) 4 position 5.25 5.25 4.25 5.9 0.8 0.8 2.4 2.4 2.1 10.5 ?1.5 +0.1 0 +0.1 0 +0.1 0 4-?1.7 4-?1.1 dip post arrangement for pcb layout remarks 1. the applicable pcb thickness is between 0.8 and 1.6mm. 2. a machining tolerance of ?.05 is recommended for the pcb layout. 3. the above gure shows the pcb side of the rack into which contact dip posts will be inserted. " " mark indicates the plug interface mating side. receptacle rp34-8r-3pdl part no. hrs no. b c applicable wire size remarks rp34-sc-212 113-5043-5 1.6 2.1 18 to 22 awg reel contacts rp34-sc-112 113-5076-4 1.6 2.1 18 to 22 awg loose piece contacts rp34-sc-222 113-5100-7 1.2 1.35 24 to 28 awg reel contacts rp34-sc-122 113-5102-2 1.2 1.35 24 to 28 awg loose piece contacts note : loose piece contacts are packaged 100 pcs/pack and reel contacts are available on 10,000 piece reel. please order in full quantity packs or reels. contact (female contact) a_a a a b 8.7 1.48 c 3 2 1 11.3 a 10 3 b 4 rp34 series small plastic connectors for ac adapters type items part no. hrs no. applicable contact applicable wire size machine crimping automatic crimping press cm-105c 901-0001-0 ???? ???? applicator ap105-rp34-1 901-2025-2 rp34-sc-212 18 to 22 awg ap105-rp34-2 901-2034-3 rp34-sc-222 24 to 28 awg cable crimping tool rp34-tc-01 150-0074-1 ???? ???? extraction tool rp34-sc-tp 150-0072-6 ???? ???? cable bushing metal fitting for clamping cord tube (a) or (b) s-insulation p case 2mm or more 20 2 +0.5 0 1.3 cover cord tube s-insulation p case cable crimping tool (rp34-tc-01) (the handle shape shown above is a representative example.) automatic crimping press (type cm-105c) termination procedure applicable tools straight plug rightangle plug operation procedure ? straight plug 1. first, pass the prepared cable through the bushing, and then crimp and terminate the contacts. 2. assemble the crimped and terminated contacts i nto the contact holes of the s-insulation p case. at this time, please make sure that the crimped contacts are securely engaged onto the contact holes of the s-insulation p case by lightly pulling on the cable. 3. crimp and x the metal tting for clamping with the applicable tool (rp34-tc-01). 4. assemble the s-insulation p case, metal tting for clamping, and bushing onto the cord tube (a). the s-insulation p case can be assembled in two ways, at 180?opposing angles. please make sure to select the orientation that is suitable for your purpose. 5. finally, assemble the remaining cord tube (b). the assembly has been completed. operation procedure ? right-angled plug 1. the right-angled plugs can be assembled in the same manner as the straight plugs, and the s-insulation p case can be assembled to the cord tube in one of two positions. 180?opposite each other. please make sure to select the orientation that is suitable for your purpose. 5 rp34 series small plastic connectors for ac adapters type rp34l product specifications ratings rated current 5a (when using 18 awg) operating temperature range ?25 ? to +85 ? rated voltage ac30v, dc42v storage temperature range ?10 ? to +60 ? items speci? cations conditions 1. contact resistance 30m? max. measured at dc 1a 2. insulation resistance 1,000m? min. measured at dc 100v 3. withstanding voltage no ? ashover or dielectric breakdown. ac 150v for 1 minute 4. vibration proof no electrical discontinuity 10s or longer. 10 to 55hz, half amplitude : 0.75mm, 3 axis directions, 2 hours each 5. temperature cycle insulation resistance : 100m? min -55? : 30 minutes ? normal temperature : 10 to 15 minutes ? +85? : 30 minutes ? normal temperature : 10 to 15 minutes, 5 cycles 6. corrosion resistance no corrosion that affects performance. left in 5% salt water solution for 48 hours 7. mating cycles contact resistance : 60m? max 5,000 times materials / finish items material finish remarks receptacle ? (2position) metal ? tting phosphor bronze solder plating ???? insulator polyamide resin black ul94hb contact brass palladium plating ???? plug ? (2 position) exterior vinyl chloride resin black ul94v-0 insulator polyamide resin ul94hb contact phosphor bronze silver plating ???? receptacle ? (3 position) metal ? tting phosphor bronze solder plating ???? insulator pps resin black ul94v-0 contact brass palladium plating ???? plug ? (3 position) exterior polycarbonate resin black ul94v-0 vinyl chloride resin insulator pps resin contact phosphor bronze palladium plating ???? product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. rp34l - 5pa - 2sc (****) series name : rp34l shell : indicates the shell form. type receptacle : r straight plug : pa right-angled plug : lp number of contacts : shows the number. 2 or 3 contacts. contact type pd : male contact (dip) sc : female contact (crimped) cable length : ( ****) may vary depending on the cable. 6 rp34l series small plastic connectors for ac adapters part no. hrs no. rp34l-5r-2pd(71) 113-5154-6 71 rp34l-5r-3pd(71) 113-5157-4 71 receptacle 3 position 7 9.1 5 2.5 rp34l-5r-2pd(71) rp34l-5r-3pd(71) (1.2) 1.3 0 -0.1 2.120.05 recommended panel opening dimensions (reference) pcb panel plug 7.4 +0.1 0 +0.1 0 3.9 (mating interface side) 4.30.05 4.30.05 3 40.05 4.50.05 1.150.05 2.350.05 2.350.05 2 ? ?1.5 +0.1 0 4 ? ?1.1 +0.1 0 pcb layout mounting dimensions 7.4 2.5 6.1 7 1.3 -0.1 0 recommended panel opening dimensions (reference) panel 7.5 +0.1 0 6.2 +0.1 0 (1.2) pcb (mating interface side) 3 40.05 0.20.05 1.350.05 1.350.05 3.450.05 3.450.05 2? ?1.5 +0.1 0 3? ? 1.1 +0.1 0 pcb layout dimension 2 position 2 position 3 position part no. hrs no. rp34l-5pa-2sc(1857)(71) 113-5153-3 71 rp34l-5pa-3sc(71) 113-5178-4 71 rp34l-5lp-3sc(71) 113-5161-1 71 plug rp34l-5pa-2sc(1857)(71) 1857 4.8 22.4 1800 21.5 7.6 board-in crimping contact bushing 7 9.7 6.1 7.8 ?3.5 a a_a 6 r3 single-contact shielded cable (center conductor wires: 18 awg, shielded cable: 18awg or equivalent) ?9 6 1.5 5.5 a 2.5 rp34l-5pa-3sc(71) 3.7 (external shell) 7.2 10.45 4.8 6.2 23.1 29.7 7.8 ?4.4 rp34l-5lp-3sc(71) 11.4 17.6 11 11.625 2.65 7.2 10.9 11.85 7.8 3.7 ?4.4 4.8 6.2 5.925 7 rp34l series small plastic connectors for ac adapters crimp contact rp34l-sc1-212(01) 0.3 12.7 2.2 1.6 a a section a_a part no. hrs no. rp34l-sc1-212(01) 113-5151-8 01 applicable tools type part no. hrs no. applicable contact applicable cables manual crimping tools ht-102/rp34l-sc1-212 150-0210-8 rp34l-sc1-112(01) 18 to 22 awg machine crimping automatic crimping press cm-105c 901-0001-0 -------------- -------------- applicator ap105-rp34l-sc1-212 901-2043-4 rp34l-sc1-212(01) 18 to 22 awg cable crimping tool rp34-tc-01 150-0074-1 -------------- 4 extraction tool rp6-sc-tp 150-0039-0 -------------- -------------- assembly procedure (3 position plug) straight plug s-insulation p case 5.3 (mating section) (round hole) 8 2 +0.5 0 2 1 cord tube (b) cord tube (a) bushing metal fitting for clamping cable cord tube (b) cord tube (a) (tab) right angle 11 2 s-insulation p case metal fitting for clamping 2 1 cord tube bushing metal fitting for clamping s-insulation p case cable 13.7 2 +0.5 0 1. first pass the prepared cable through the bushing, and then crimp and terminate the contacts. 2. assemble the crimped and terminated contacts into the contact holes of the s-insulation p case. at this time, please make sure that the crimped contacts are securely engaged onto the contact holes of the s-insulation p case by lightly pulling the cable. if you nd an erroneous wiring, insert the extractor (rp6-sc-tp) from the mating side to pull out the contact from the termination side, and then re- assemble. 3. crimp the metal tting for clamping with the applicable tool (rp34- tc-01). 4. align and assemble the protrusion of the s-insulation p case to the round hole of the cord tube (b). 5. attach the mating section of the metal fitting for clamping to the recess of the cord tube (b), and then assemble the bushing and metal tting for clamping onto the cord tube (b). 6. assemble the cord tube (a) onto the cord tube (b). at this time, please make sure that the four tabs of the cord tube (b) rest on the angled hole of the cord tube (a). 1. right-angled plugs can be assembled in the same manner as the straight plugs. 8 rp34l series small plastic connectors for ac adapters precautions 1. to prevent damage to the connector after mounting, make sure that it is supported with a panel or another substrate. this will prevent any type of excessive load or force on the connector. for 2 position type, please support the external shell of th e receptacle. for 3 position type, please support the external shell of the plug. y see page 3 for details on recommended panel dimensions. 2. when mated together, do not apply a load of 30 n or more on the cable in the direction indicated by the arrows. please note that an excessive tensile stress may break the connectors. (external shell) panel plug receptacle receptacle panel <2 position type> <3 position type> 3. this product series uses silver plated contacts. silver reacts easily to exposure to sulfur gas so the below conditions may cause tarnishing. y~ dusty environments y~ area with a high concentration area of gases such as sulfur dioxide gas, hydrogen sulfide gas, nitrogen dioxide gas and so on. example; in close proximity to factory exhaust, automotive emissions, etc. y~ close to heaters, or in other areas marked by extreme temperature differences or high humidity. y~ close to rubber products includes rubber adhesives. the electrical connection is not affected by tarnishing on a silver surface due to the wiping effect of the contact pins. storage packing state; packed in original packing or equivalent container temperature -10 to +60? humidity 85% max (it is recommended that the product be stored in an area of normal level of temperature and humidity, and free of any temperature fluctuation) please use this products within 6 months of delivery. (after 6 month, please check the solderbility before use) ?torage?means long-term storage of the unused products in sealed packaging, prior to assembly to pcb. 9 rp34l series small plastic connectors for ac adapters memo : 10 rp34 series small plastic connectors for ac adapters memo : 11 rp34 series small plastic connectors for ac adapters 12 rp34 series small plastic connectors for ac adapters the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 07/2018. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? usa: hirose electric (u.s.a.), inc. san jose office 2841 junction ave, suite 200 san jose, ca. 95134 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. detroit office (automotive) 17197 n. laurel park drive, suite 253, livonia, mi 48152 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. boston office 300 brickstone square suite 201, andover, ma 01810 phone : +1-978-662-5255 usa: hirose electric (u.s.a.), inc. headquarters chicago office 2300 warrenville road, suite 150, downers grove, il 60515 phone : +1-630-282-6700 http://www.hirose.com/us/ china: hirose electric (china) co., ltd. shenzhen branch room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose.com/cn/ korea: hirose korea co.,ltd. 143, gongdan 1-daero, siheung-si, gyeonggi-do, 15084, korea phone : +82-31-496-7000 fax : +82-31-496-7100 http://www.hirose.co.kr/ germany: hirose electric europe b.v. nuremberg office neumeyerstrasse 22-26, 90411 nurnberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ germany: hirose electric europe b.v. hanover office bayernstr. 3, haus c 30855 langenhagen, germany phone : +49-511 97 82 61 30 fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ germany: hirose electric europe b.v. german branch schoenbergstr. 20, 73760 ostfildern phone : +49-711-456002-1 fax : +49-711-456002-299 http://www.hirose.com/eu/ france: hirose electric europe b.v. paris office 130 avenue joseph kessel, bat e, 78960 voisins le bretonneux, france phone : +33-1-85764886 fax : +33-1-85764823 http://www.hirose.com/eu/ the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hirose.com/eu/ united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 http://www.hirose.com/eu/ china: hirose electric (china) co., ltd. (shanghai, headquarters) 18, enterprise center tower 2, 209# gong he road, jing?an district, shanghai, china 200070 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose.com/cn/ china: hirose electric (china) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose.com/cn/ taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7355 http://www.hirose.com/tw/ hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose.com/hk/ india: hirose electric singapore pte. ltd. delhi liaison office office no.552, regus-green bo ulevard, level5, tower c, sec62, plot b-9a, block b, noida, 201301, uttar pradesh, india phone : +91-12-660-8018 fax : +91-120-4804949 http://www.hirose.com/sg/ singapore: hirose electric singapore pte. ltd. 03, anson road, #20-01, springleaf tower, singapore 079909 phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose.com/sg/ india: hirose electric singapore pte. ltd. bangalore liaison office unit no-403, 4th floor, no-84, barton centre, mahatma gandhi (mg) road, bangalore 560 001, karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose.com/sg/ malaysia: penang representative office 73-3-1, ideal@the one, jalan mahsuri, bayan lepas penang, 11950, malaysia phone : +604-648-5536 http://www.hirose.com/sg/ thailand: bangkok office (representative office) unit 4703, 47th fl., 1 empire tower, south sathorn road, yannawa, sathorn, bangkok 10120 thailand phone : +66-2-686-1255 fax : +66-2-686-3433 http://www.hirose.com/sg/
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. 2018.7 w small i/o connectors for ac adapters rp34 series features 1. superior mating operability a snap-and-lock style allows easy mating/ unmating. 2. cable direction is variable the three-position, right-angled plug makes it possible to arrange the cable to the left or right, offering flexible wiring options depending on your requirement. 3. sequential contact mating designed with sequential contact mating, one pin makes contact with its counterpart sooner than the others and establishes a securely grounded connection. 4. easy plug assembly a snap-together case eliminates the need for screws to fasten the case and helps provide for a quick plug assembly. 5. variations items number of contacts 3 or, 4 connector type plug : straight, right angle receptacle : right angle plug termination version crimp receptacle termination version pcb dip receptacle mounting method pcb dip product speci cations ratings rated current 3a operating temperature range -10 to +60 ? rated voltage ac30v , dc42v storage temperature range -10 to +60 ? items speci cations conditions 1. contact resistance 30m?max measured at dc 1a 2. insulation resistance 1,000m?min measured at dc 100v 3. withstanding voltage no ashover or dielectric breakdown. ac 150v for 1 minute 4. vibration resistance no electrical discontinuity for 10? or longer. 10 to 55hz/cycle, amplitude : 0.75mm, 3 axis directions, 2 hours each 5. shock resistance no electrical discontinuity for 10? or longer. acceleration : 490m/s 2 , duration : 11ms, 3 axis directions, 3 cycles each 6. mating cycles contact resistance : 60m?max. 1,000 times 7. temperature cycle insulation resistance : 100m?min. -55? : 30 minutes ? normal temperature : 10 to 15 minutes ? 85? : 30 minutes ? normal temperature : 10 to 15 minutes, left for 5 cycles 8. moisture resistance insulation resistance: 10m?min (at high humidities). 100m?min (when dry). temperature : 40?, relative humidity : 90 to 95%, left for 96 hours materials / finish items material finish remarks plug exterior, insulator polycarbonate resin ???? ul94v-0 clamp brass ???? ???? bushing vinyl chloride resin ???? ???? receptacle exterior, insulator pbt resin ???? ul94v-0 steel tin plating ???? male contact brass silver plating ???? crimped female contact female contact phosphor bronze silver plating ???? 1 in cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information. model name : rp34 series shell size : the shell size is the outer diameter of the mating end of the plug. shell type sp : straight plug p : right-angled plug r : receptacle number of contacts : contact form p : male contact s : female contact contact termination method : c : crimp contact termination dl : right-angled dip method other speci cations : a two-digit character is added to indicate other speci cations. model name : rp34 series contact type : sc = crimped female contact contact packaging types : 1 : loose piece contacts 2 : reel contacts applicable wire : 1 : for 18 to 22 awg 2 : for 24 to 28 awg identi cation of plating : 2 : silver plating product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. connector crimp contact rp34 - 8sp - 3 s c (71) rp34 - sc - 212 2 rp34 series small plastic connectors for ac adapters (this figure is a representative example.) (this gure is a representative example.) part no. hrs no. rp34-8p-3sc(71) 113-5041-0 71 note : cable clamping force, cable rotation force, and other aspects may differ depending on the cable construction. we recommend that you verify the suitability of the cable assembly before use or production. part no. hrs no. no. of contacts a remarks rp34-8sp-3sc(71) 113-5049-1 71 3 9.6 ???? rp34-8sp-3scd(71) 113-5061-7 71 mating key dependent type rp34-8sp-4sc(71) 113-5097-4 71 4 11 ???? note : cable clamping force, cable rotation force, and other aspects may differ depending on the cable construction. we reccomend that you verify the suitability of the cable assembly before use or production. right-angled plug straight plug rp34-8p-3sc(71) rp34-8sp-3sc(71) 32 1 ?4.4 2 10 10 18 25 7.5 18 3 2 1 ?4.4 a 10 7.5 37.5 30.5 3 rp34 series small plastic connectors for ac adapters (this figure is a representative example.) part no. hrs no. no. of contacts a b remarks rp34-8r-3pdl 113-5042-2 31011 ???? rp34-8r-3pdld 113-5066-0 mating key dependent type rp34-8r-4pdl 113-5098-7 4 11 12 ???? 3 position positioning hole (1 location) 1.9 1.9 2.75 7.4 4.75 4.75 2.1 10.5 3-?1.1 +0.1 0 +0.1 0 +0.1 0 4-?1.7 ?1.5 21 4 3 positioning hole (1 location) 4 position 5.25 5.25 4.25 5.9 0.8 0.8 2.4 2.4 2.1 10.5 ?1.5 +0.1 0 +0.1 0 +0.1 0 4-?1.7 4-?1.1 dip post arrangement for pcb layout remarks 1. the applicable pcb thickness is between 0.8 and 1.6mm. 2. a machining tolerance of ?.05 is recommended for the pcb layout. 3. the above gure shows the pcb side of the rack into which contact dip posts will be inserted. " " mark indicates the plug interface mating side. receptacle rp34-8r-3pdl part no. hrs no. b c applicable wire size remarks rp34-sc-212 113-5043-5 1.6 2.1 18 to 22 awg reel contacts rp34-sc-112 113-5076-4 1.6 2.1 18 to 22 awg loose piece contacts rp34-sc-222 113-5100-7 1.2 1.35 24 to 28 awg reel contacts rp34-sc-122 113-5102-2 1.2 1.35 24 to 28 awg loose piece contacts note : loose piece contacts are packaged 100 pcs/pack and reel contacts are available on 10,000 piece reel. please order in full quantity packs or reels. contact (female contact) a_a a a b 8.7 1.48 c 3 2 1 11.3 a 10 3 b 4 rp34 series small plastic connectors for ac adapters type items part no. hrs no. applicable contact applicable wire size machine crimping automatic crimping press cm-105c 901-0001-0 ???? ???? applicator ap105-rp34-1 901-2025-2 rp34-sc-212 18 to 22 awg ap105-rp34-2 901-2034-3 rp34-sc-222 24 to 28 awg cable crimping tool rp34-tc-01 150-0074-1 ???? ???? extraction tool rp34-sc-tp 150-0072-6 ???? ???? cable bushing metal fitting for clamping cord tube (a) or (b) s-insulation p case 2mm or more 20 2 +0.5 0 1.3 cover cord tube s-insulation p case cable crimping tool (rp34-tc-01) (the handle shape shown above is a representative example.) automatic crimping press (type cm-105c) termination procedure applicable tools straight plug rightangle plug operation procedure ? straight plug 1. first, pass the prepared cable through the bushing, and then crimp and terminate the contacts. 2. assemble the crimped and terminated contacts i nto the contact holes of the s-insulation p case. at this time, please make sure that the crimped contacts are securely engaged onto the contact holes of the s-insulation p case by lightly pulling on the cable. 3. crimp and x the metal tting for clamping with the applicable tool (rp34-tc-01). 4. assemble the s-insulation p case, metal tting for clamping, and bushing onto the cord tube (a). the s-insulation p case can be assembled in two ways, at 180?opposing angles. please make sure to select the orientation that is suitable for your purpose. 5. finally, assemble the remaining cord tube (b). the assembly has been completed. operation procedure ? right-angled plug 1. the right-angled plugs can be assembled in the same manner as the straight plugs, and the s-insulation p case can be assembled to the cord tube in one of two positions. 180?opposite each other. please make sure to select the orientation that is suitable for your purpose. 5 rp34 series small plastic connectors for ac adapters type rp34l product specifications ratings rated current 5a (when using 18 awg) operating temperature range ?25 ? to +85 ? rated voltage ac30v, dc42v storage temperature range ?10 ? to +60 ? items speci? cations conditions 1. contact resistance 30m? max. measured at dc 1a 2. insulation resistance 1,000m? min. measured at dc 100v 3. withstanding voltage no ? ashover or dielectric breakdown. ac 150v for 1 minute 4. vibration proof no electrical discontinuity 10s or longer. 10 to 55hz, half amplitude : 0.75mm, 3 axis directions, 2 hours each 5. temperature cycle insulation resistance : 100m? min -55? : 30 minutes ? normal temperature : 10 to 15 minutes ? +85? : 30 minutes ? normal temperature : 10 to 15 minutes, 5 cycles 6. corrosion resistance no corrosion that affects performance. left in 5% salt water solution for 48 hours 7. mating cycles contact resistance : 60m? max 5,000 times materials / finish items material finish remarks receptacle ? (2position) metal ? tting phosphor bronze solder plating ???? insulator polyamide resin black ul94hb contact brass palladium plating ???? plug ? (2 position) exterior vinyl chloride resin black ul94v-0 insulator polyamide resin ul94hb contact phosphor bronze silver plating ???? receptacle ? (3 position) metal ? tting phosphor bronze solder plating ???? insulator pps resin black ul94v-0 contact brass palladium plating ???? plug ? (3 position) exterior polycarbonate resin black ul94v-0 vinyl chloride resin insulator pps resin contact phosphor bronze palladium plating ???? product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. rp34l - 5pa - 2sc (****) series name : rp34l shell : indicates the shell form. type receptacle : r straight plug : pa right-angled plug : lp number of contacts : shows the number. 2 or 3 contacts. contact type pd : male contact (dip) sc : female contact (crimped) cable length : ( ****) may vary depending on the cable. 6 rp34l series small plastic connectors for ac adapters part no. hrs no. rp34l-5r-2pd(71) 113-5154-6 71 rp34l-5r-3pd(71) 113-5157-4 71 receptacle 3 position 7 9.1 5 2.5 rp34l-5r-2pd(71) rp34l-5r-3pd(71) (1.2) 1.3 0 -0.1 2.120.05 recommended panel opening dimensions (reference) pcb panel plug 7.4 +0.1 0 +0.1 0 3.9 (mating interface side) 4.30.05 4.30.05 3 40.05 4.50.05 1.150.05 2.350.05 2.350.05 2 ? ?1.5 +0.1 0 4 ? ?1.1 +0.1 0 pcb layout mounting dimensions 7.4 2.5 6.1 7 1.3 -0.1 0 recommended panel opening dimensions (reference) panel 7.5 +0.1 0 6.2 +0.1 0 (1.2) pcb (mating interface side) 3 40.05 0.20.05 1.350.05 1.350.05 3.450.05 3.450.05 2? ?1.5 +0.1 0 3? ? 1.1 +0.1 0 pcb layout dimension 2 position 2 position 3 position part no. hrs no. rp34l-5pa-2sc(1857)(71) 113-5153-3 71 rp34l-5pa-3sc(71) 113-5178-4 71 rp34l-5lp-3sc(71) 113-5161-1 71 plug rp34l-5pa-2sc(1857)(71) 1857 4.8 22.4 1800 21.5 7.6 board-in crimping contact bushing 7 9.7 6.1 7.8 ?3.5 a a_a 6 r3 single-contact shielded cable (center conductor wires: 18 awg, shielded cable: 18awg or equivalent) ?9 6 1.5 5.5 a 2.5 rp34l-5pa-3sc(71) 3.7 (external shell) 7.2 10.45 4.8 6.2 23.1 29.7 7.8 ?4.4 rp34l-5lp-3sc(71) 11.4 17.6 11 11.625 2.65 7.2 10.9 11.85 7.8 3.7 ?4.4 4.8 6.2 5.925 7 rp34l series small plastic connectors for ac adapters crimp contact rp34l-sc1-212(01) 0.3 12.7 2.2 1.6 a a section a_a part no. hrs no. rp34l-sc1-212(01) 113-5151-8 01 applicable tools type part no. hrs no. applicable contact applicable cables manual crimping tools ht-102/rp34l-sc1-212 150-0210-8 rp34l-sc1-112(01) 18 to 22 awg machine crimping automatic crimping press cm-105c 901-0001-0 -------------- -------------- applicator ap105-rp34l-sc1-212 901-2043-4 rp34l-sc1-212(01) 18 to 22 awg cable crimping tool rp34-tc-01 150-0074-1 -------------- 4 extraction tool rp6-sc-tp 150-0039-0 -------------- -------------- assembly procedure (3 position plug) straight plug s-insulation p case 5.3 (mating section) (round hole) 8 2 +0.5 0 2 1 cord tube (b) cord tube (a) bushing metal fitting for clamping cable cord tube (b) cord tube (a) (tab) right angle 11 2 s-insulation p case metal fitting for clamping 2 1 cord tube bushing metal fitting for clamping s-insulation p case cable 13.7 2 +0.5 0 1. first pass the prepared cable through the bushing, and then crimp and terminate the contacts. 2. assemble the crimped and terminated contacts into the contact holes of the s-insulation p case. at this time, please make sure that the crimped contacts are securely engaged onto the contact holes of the s-insulation p case by lightly pulling the cable. if you nd an erroneous wiring, insert the extractor (rp6-sc-tp) from the mating side to pull out the contact from the termination side, and then re- assemble. 3. crimp the metal tting for clamping with the applicable tool (rp34- tc-01). 4. align and assemble the protrusion of the s-insulation p case to the round hole of the cord tube (b). 5. attach the mating section of the metal fitting for clamping to the recess of the cord tube (b), and then assemble the bushing and metal tting for clamping onto the cord tube (b). 6. assemble the cord tube (a) onto the cord tube (b). at this time, please make sure that the four tabs of the cord tube (b) rest on the angled hole of the cord tube (a). 1. right-angled plugs can be assembled in the same manner as the straight plugs. 8 rp34l series small plastic connectors for ac adapters precautions 1. to prevent damage to the connector after mounting, make sure that it is supported with a panel or another substrate. this will prevent any type of excessive load or force on the connector. for 2 position type, please support the external shell of th e receptacle. for 3 position type, please support the external shell of the plug. y see page 3 for details on recommended panel dimensions. 2. when mated together, do not apply a load of 30 n or more on the cable in the direction indicated by the arrows. please note that an excessive tensile stress may break the connectors. (external shell) panel plug receptacle receptacle panel <2 position type> <3 position type> 3. this product series uses silver plated contacts. silver reacts easily to exposure to sulfur gas so the below conditions may cause tarnishing. y~ dusty environments y~ area with a high concentration area of gases such as sulfur dioxide gas, hydrogen sulfide gas, nitrogen dioxide gas and so on. example; in close proximity to factory exhaust, automotive emissions, etc. y~ close to heaters, or in other areas marked by extreme temperature differences or high humidity. y~ close to rubber products includes rubber adhesives. the electrical connection is not affected by tarnishing on a silver surface due to the wiping effect of the contact pins. storage packing state; packed in original packing or equivalent container temperature -10 to +60? humidity 85% max (it is recommended that the product be stored in an area of normal level of temperature and humidity, and free of any temperature fluctuation) please use this products within 6 months of delivery. (after 6 month, please check the solderbility before use) ?torage?means long-term storage of the unused products in sealed packaging, prior to assembly to pcb. 9 rp34l series small plastic connectors for ac adapters memo : 10 rp34 series small plastic connectors for ac adapters memo : 11 rp34 series small plastic connectors for ac adapters 12 rp34 series small plastic connectors for ac adapters the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 07/2018. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? usa: hirose electric (u.s.a.), inc. san jose office 2841 junction ave, suite 200 san jose, ca. 95134 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. detroit office (automotive) 17197 n. laurel park drive, suite 253, livonia, mi 48152 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. boston office 300 brickstone square suite 201, andover, ma 01810 phone : +1-978-662-5255 usa: hirose electric (u.s.a.), inc. headquarters chicago office 2300 warrenville road, suite 150, downers grove, il 60515 phone : +1-630-282-6700 http://www.hirose.com/us/ china: hirose electric (china) co., ltd. shenzhen branch room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose.com/cn/ korea: hirose korea co.,ltd. 143, gongdan 1-daero, siheung-si, gyeonggi-do, 15084, korea phone : +82-31-496-7000 fax : +82-31-496-7100 http://www.hirose.co.kr/ germany: hirose electric europe b.v. nuremberg office neumeyerstrasse 22-26, 90411 nurnberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ germany: hirose electric europe b.v. hanover office bayernstr. 3, haus c 30855 langenhagen, germany phone : +49-511 97 82 61 30 fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ germany: hirose electric europe b.v. german branch schoenbergstr. 20, 73760 ostfildern phone : +49-711-456002-1 fax : +49-711-456002-299 http://www.hirose.com/eu/ france: hirose electric europe b.v. paris office 130 avenue joseph kessel, bat e, 78960 voisins le bretonneux, france phone : +33-1-85764886 fax : +33-1-85764823 http://www.hirose.com/eu/ the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hirose.com/eu/ united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 http://www.hirose.com/eu/ china: hirose electric (china) co., ltd. (shanghai, headquarters) 18, enterprise center tower 2, 209# gong he road, jing?an district, shanghai, china 200070 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose.com/cn/ china: hirose electric (china) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose.com/cn/ taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7355 http://www.hirose.com/tw/ hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose.com/hk/ india: hirose electric singapore pte. ltd. delhi liaison office office no.552, regus-green bo ulevard, level5, tower c, sec62, plot b-9a, block b, noida, 201301, uttar pradesh, india phone : +91-12-660-8018 fax : +91-120-4804949 http://www.hirose.com/sg/ singapore: hirose electric singapore pte. ltd. 03, anson road, #20-01, springleaf tower, singapore 079909 phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose.com/sg/ india: hirose electric singapore pte. ltd. bangalore liaison office unit no-403, 4th floor, no-84, barton centre, mahatma gandhi (mg) road, bangalore 560 001, karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose.com/sg/ malaysia: penang representative office 73-3-1, ideal@the one, jalan mahsuri, bayan lepas penang, 11950, malaysia phone : +604-648-5536 http://www.hirose.com/sg/ thailand: bangkok office (representative office) unit 4703, 47th fl., 1 empire tower, south sathorn road, yannawa, sathorn, bangkok 10120 thailand phone : +66-2-686-1255 fax : +66-2-686-3433 http://www.hirose.com/sg/
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. 2018.7 w small i/o connectors for ac adapters rp34 series features 1. superior mating operability a snap-and-lock style allows easy mating/ unmating. 2. cable direction is variable the three-position, right-angled plug makes it possible to arrange the cable to the left or right, offering flexible wiring options depending on your requirement. 3. sequential contact mating designed with sequential contact mating, one pin makes contact with its counterpart sooner than the others and establishes a securely grounded connection. 4. easy plug assembly a snap-together case eliminates the need for screws to fasten the case and helps provide for a quick plug assembly. 5. variations items number of contacts 3 or, 4 connector type plug : straight, right angle receptacle : right angle plug termination version crimp receptacle termination version pcb dip receptacle mounting method pcb dip product speci cations ratings rated current 3a operating temperature range -10 to +60 ? rated voltage ac30v , dc42v storage temperature range -10 to +60 ? items speci cations conditions 1. contact resistance 30m?max measured at dc 1a 2. insulation resistance 1,000m?min measured at dc 100v 3. withstanding voltage no ashover or dielectric breakdown. ac 150v for 1 minute 4. vibration resistance no electrical discontinuity for 10? or longer. 10 to 55hz/cycle, amplitude : 0.75mm, 3 axis directions, 2 hours each 5. shock resistance no electrical discontinuity for 10? or longer. acceleration : 490m/s 2 , duration : 11ms, 3 axis directions, 3 cycles each 6. mating cycles contact resistance : 60m?max. 1,000 times 7. temperature cycle insulation resistance : 100m?min. -55? : 30 minutes ? normal temperature : 10 to 15 minutes ? 85? : 30 minutes ? normal temperature : 10 to 15 minutes, left for 5 cycles 8. moisture resistance insulation resistance: 10m?min (at high humidities). 100m?min (when dry). temperature : 40?, relative humidity : 90 to 95%, left for 96 hours materials / finish items material finish remarks plug exterior, insulator polycarbonate resin ???? ul94v-0 clamp brass ???? ???? bushing vinyl chloride resin ???? ???? receptacle exterior, insulator pbt resin ???? ul94v-0 steel tin plating ???? male contact brass silver plating ???? crimped female contact female contact phosphor bronze silver plating ???? 1 in cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information. model name : rp34 series shell size : the shell size is the outer diameter of the mating end of the plug. shell type sp : straight plug p : right-angled plug r : receptacle number of contacts : contact form p : male contact s : female contact contact termination method : c : crimp contact termination dl : right-angled dip method other speci cations : a two-digit character is added to indicate other speci cations. model name : rp34 series contact type : sc = crimped female contact contact packaging types : 1 : loose piece contacts 2 : reel contacts applicable wire : 1 : for 18 to 22 awg 2 : for 24 to 28 awg identi cation of plating : 2 : silver plating product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. connector crimp contact rp34 - 8sp - 3 s c (71) rp34 - sc - 212 2 rp34 series small plastic connectors for ac adapters (this figure is a representative example.) (this gure is a representative example.) part no. hrs no. rp34-8p-3sc(71) 113-5041-0 71 note : cable clamping force, cable rotation force, and other aspects may differ depending on the cable construction. we recommend that you verify the suitability of the cable assembly before use or production. part no. hrs no. no. of contacts a remarks rp34-8sp-3sc(71) 113-5049-1 71 3 9.6 ???? rp34-8sp-3scd(71) 113-5061-7 71 mating key dependent type rp34-8sp-4sc(71) 113-5097-4 71 4 11 ???? note : cable clamping force, cable rotation force, and other aspects may differ depending on the cable construction. we reccomend that you verify the suitability of the cable assembly before use or production. right-angled plug straight plug rp34-8p-3sc(71) rp34-8sp-3sc(71) 32 1 ?4.4 2 10 10 18 25 7.5 18 3 2 1 ?4.4 a 10 7.5 37.5 30.5 3 rp34 series small plastic connectors for ac adapters (this figure is a representative example.) part no. hrs no. no. of contacts a b remarks rp34-8r-3pdl 113-5042-2 31011 ???? rp34-8r-3pdld 113-5066-0 mating key dependent type rp34-8r-4pdl 113-5098-7 4 11 12 ???? 3 position positioning hole (1 location) 1.9 1.9 2.75 7.4 4.75 4.75 2.1 10.5 3-?1.1 +0.1 0 +0.1 0 +0.1 0 4-?1.7 ?1.5 21 4 3 positioning hole (1 location) 4 position 5.25 5.25 4.25 5.9 0.8 0.8 2.4 2.4 2.1 10.5 ?1.5 +0.1 0 +0.1 0 +0.1 0 4-?1.7 4-?1.1 dip post arrangement for pcb layout remarks 1. the applicable pcb thickness is between 0.8 and 1.6mm. 2. a machining tolerance of ?.05 is recommended for the pcb layout. 3. the above gure shows the pcb side of the rack into which contact dip posts will be inserted. " " mark indicates the plug interface mating side. receptacle rp34-8r-3pdl part no. hrs no. b c applicable wire size remarks rp34-sc-212 113-5043-5 1.6 2.1 18 to 22 awg reel contacts rp34-sc-112 113-5076-4 1.6 2.1 18 to 22 awg loose piece contacts rp34-sc-222 113-5100-7 1.2 1.35 24 to 28 awg reel contacts rp34-sc-122 113-5102-2 1.2 1.35 24 to 28 awg loose piece contacts note : loose piece contacts are packaged 100 pcs/pack and reel contacts are available on 10,000 piece reel. please order in full quantity packs or reels. contact (female contact) a_a a a b 8.7 1.48 c 3 2 1 11.3 a 10 3 b 4 rp34 series small plastic connectors for ac adapters type items part no. hrs no. applicable contact applicable wire size machine crimping automatic crimping press cm-105c 901-0001-0 ???? ???? applicator ap105-rp34-1 901-2025-2 rp34-sc-212 18 to 22 awg ap105-rp34-2 901-2034-3 rp34-sc-222 24 to 28 awg cable crimping tool rp34-tc-01 150-0074-1 ???? ???? extraction tool rp34-sc-tp 150-0072-6 ???? ???? cable bushing metal fitting for clamping cord tube (a) or (b) s-insulation p case 2mm or more 20 2 +0.5 0 1.3 cover cord tube s-insulation p case cable crimping tool (rp34-tc-01) (the handle shape shown above is a representative example.) automatic crimping press (type cm-105c) termination procedure applicable tools straight plug rightangle plug operation procedure ? straight plug 1. first, pass the prepared cable through the bushing, and then crimp and terminate the contacts. 2. assemble the crimped and terminated contacts i nto the contact holes of the s-insulation p case. at this time, please make sure that the crimped contacts are securely engaged onto the contact holes of the s-insulation p case by lightly pulling on the cable. 3. crimp and x the metal tting for clamping with the applicable tool (rp34-tc-01). 4. assemble the s-insulation p case, metal tting for clamping, and bushing onto the cord tube (a). the s-insulation p case can be assembled in two ways, at 180?opposing angles. please make sure to select the orientation that is suitable for your purpose. 5. finally, assemble the remaining cord tube (b). the assembly has been completed. operation procedure ? right-angled plug 1. the right-angled plugs can be assembled in the same manner as the straight plugs, and the s-insulation p case can be assembled to the cord tube in one of two positions. 180?opposite each other. please make sure to select the orientation that is suitable for your purpose. 5 rp34 series small plastic connectors for ac adapters type rp34l product specifications ratings rated current 5a (when using 18 awg) operating temperature range ?25 ? to +85 ? rated voltage ac30v, dc42v storage temperature range ?10 ? to +60 ? items speci? cations conditions 1. contact resistance 30m? max. measured at dc 1a 2. insulation resistance 1,000m? min. measured at dc 100v 3. withstanding voltage no ? ashover or dielectric breakdown. ac 150v for 1 minute 4. vibration proof no electrical discontinuity 10s or longer. 10 to 55hz, half amplitude : 0.75mm, 3 axis directions, 2 hours each 5. temperature cycle insulation resistance : 100m? min -55? : 30 minutes ? normal temperature : 10 to 15 minutes ? +85? : 30 minutes ? normal temperature : 10 to 15 minutes, 5 cycles 6. corrosion resistance no corrosion that affects performance. left in 5% salt water solution for 48 hours 7. mating cycles contact resistance : 60m? max 5,000 times materials / finish items material finish remarks receptacle ? (2position) metal ? tting phosphor bronze solder plating ???? insulator polyamide resin black ul94hb contact brass palladium plating ???? plug ? (2 position) exterior vinyl chloride resin black ul94v-0 insulator polyamide resin ul94hb contact phosphor bronze silver plating ???? receptacle ? (3 position) metal ? tting phosphor bronze solder plating ???? insulator pps resin black ul94v-0 contact brass palladium plating ???? plug ? (3 position) exterior polycarbonate resin black ul94v-0 vinyl chloride resin insulator pps resin contact phosphor bronze palladium plating ???? product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. rp34l - 5pa - 2sc (****) series name : rp34l shell : indicates the shell form. type receptacle : r straight plug : pa right-angled plug : lp number of contacts : shows the number. 2 or 3 contacts. contact type pd : male contact (dip) sc : female contact (crimped) cable length : ( ****) may vary depending on the cable. 6 rp34l series small plastic connectors for ac adapters part no. hrs no. rp34l-5r-2pd(71) 113-5154-6 71 rp34l-5r-3pd(71) 113-5157-4 71 receptacle 3 position 7 9.1 5 2.5 rp34l-5r-2pd(71) rp34l-5r-3pd(71) (1.2) 1.3 0 -0.1 2.120.05 recommended panel opening dimensions (reference) pcb panel plug 7.4 +0.1 0 +0.1 0 3.9 (mating interface side) 4.30.05 4.30.05 3 40.05 4.50.05 1.150.05 2.350.05 2.350.05 2 ? ?1.5 +0.1 0 4 ? ?1.1 +0.1 0 pcb layout mounting dimensions 7.4 2.5 6.1 7 1.3 -0.1 0 recommended panel opening dimensions (reference) panel 7.5 +0.1 0 6.2 +0.1 0 (1.2) pcb (mating interface side) 3 40.05 0.20.05 1.350.05 1.350.05 3.450.05 3.450.05 2? ?1.5 +0.1 0 3? ? 1.1 +0.1 0 pcb layout dimension 2 position 2 position 3 position part no. hrs no. rp34l-5pa-2sc(1857)(71) 113-5153-3 71 rp34l-5pa-3sc(71) 113-5178-4 71 rp34l-5lp-3sc(71) 113-5161-1 71 plug rp34l-5pa-2sc(1857)(71) 1857 4.8 22.4 1800 21.5 7.6 board-in crimping contact bushing 7 9.7 6.1 7.8 ?3.5 a a_a 6 r3 single-contact shielded cable (center conductor wires: 18 awg, shielded cable: 18awg or equivalent) ?9 6 1.5 5.5 a 2.5 rp34l-5pa-3sc(71) 3.7 (external shell) 7.2 10.45 4.8 6.2 23.1 29.7 7.8 ?4.4 rp34l-5lp-3sc(71) 11.4 17.6 11 11.625 2.65 7.2 10.9 11.85 7.8 3.7 ?4.4 4.8 6.2 5.925 7 rp34l series small plastic connectors for ac adapters crimp contact rp34l-sc1-212(01) 0.3 12.7 2.2 1.6 a a section a_a part no. hrs no. rp34l-sc1-212(01) 113-5151-8 01 applicable tools type part no. hrs no. applicable contact applicable cables manual crimping tools ht-102/rp34l-sc1-212 150-0210-8 rp34l-sc1-112(01) 18 to 22 awg machine crimping automatic crimping press cm-105c 901-0001-0 -------------- -------------- applicator ap105-rp34l-sc1-212 901-2043-4 rp34l-sc1-212(01) 18 to 22 awg cable crimping tool rp34-tc-01 150-0074-1 -------------- 4 extraction tool rp6-sc-tp 150-0039-0 -------------- -------------- assembly procedure (3 position plug) straight plug s-insulation p case 5.3 (mating section) (round hole) 8 2 +0.5 0 2 1 cord tube (b) cord tube (a) bushing metal fitting for clamping cable cord tube (b) cord tube (a) (tab) right angle 11 2 s-insulation p case metal fitting for clamping 2 1 cord tube bushing metal fitting for clamping s-insulation p case cable 13.7 2 +0.5 0 1. first pass the prepared cable through the bushing, and then crimp and terminate the contacts. 2. assemble the crimped and terminated contacts into the contact holes of the s-insulation p case. at this time, please make sure that the crimped contacts are securely engaged onto the contact holes of the s-insulation p case by lightly pulling the cable. if you nd an erroneous wiring, insert the extractor (rp6-sc-tp) from the mating side to pull out the contact from the termination side, and then re- assemble. 3. crimp the metal tting for clamping with the applicable tool (rp34- tc-01). 4. align and assemble the protrusion of the s-insulation p case to the round hole of the cord tube (b). 5. attach the mating section of the metal fitting for clamping to the recess of the cord tube (b), and then assemble the bushing and metal tting for clamping onto the cord tube (b). 6. assemble the cord tube (a) onto the cord tube (b). at this time, please make sure that the four tabs of the cord tube (b) rest on the angled hole of the cord tube (a). 1. right-angled plugs can be assembled in the same manner as the straight plugs. 8 rp34l series small plastic connectors for ac adapters precautions 1. to prevent damage to the connector after mounting, make sure that it is supported with a panel or another substrate. this will prevent any type of excessive load or force on the connector. for 2 position type, please support the external shell of th e receptacle. for 3 position type, please support the external shell of the plug. y see page 3 for details on recommended panel dimensions. 2. when mated together, do not apply a load of 30 n or more on the cable in the direction indicated by the arrows. please note that an excessive tensile stress may break the connectors. (external shell) panel plug receptacle receptacle panel <2 position type> <3 position type> 3. this product series uses silver plated contacts. silver reacts easily to exposure to sulfur gas so the below conditions may cause tarnishing. y~ dusty environments y~ area with a high concentration area of gases such as sulfur dioxide gas, hydrogen sulfide gas, nitrogen dioxide gas and so on. example; in close proximity to factory exhaust, automotive emissions, etc. y~ close to heaters, or in other areas marked by extreme temperature differences or high humidity. y~ close to rubber products includes rubber adhesives. the electrical connection is not affected by tarnishing on a silver surface due to the wiping effect of the contact pins. storage packing state; packed in original packing or equivalent container temperature -10 to +60? humidity 85% max (it is recommended that the product be stored in an area of normal level of temperature and humidity, and free of any temperature fluctuation) please use this products within 6 months of delivery. (after 6 month, please check the solderbility before use) ?torage?means long-term storage of the unused products in sealed packaging, prior to assembly to pcb. 9 rp34l series small plastic connectors for ac adapters memo : 10 rp34 series small plastic connectors for ac adapters memo : 11 rp34 series small plastic connectors for ac adapters 12 rp34 series small plastic connectors for ac adapters the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 07/2018. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? usa: hirose electric (u.s.a.), inc. san jose office 2841 junction ave, suite 200 san jose, ca. 95134 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. detroit office (automotive) 17197 n. laurel park drive, suite 253, livonia, mi 48152 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. boston office 300 brickstone square suite 201, andover, ma 01810 phone : +1-978-662-5255 usa: hirose electric (u.s.a.), inc. headquarters chicago office 2300 warrenville road, suite 150, downers grove, il 60515 phone : +1-630-282-6700 http://www.hirose.com/us/ china: hirose electric (china) co., ltd. shenzhen branch room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose.com/cn/ korea: hirose korea co.,ltd. 143, gongdan 1-daero, siheung-si, gyeonggi-do, 15084, korea phone : +82-31-496-7000 fax : +82-31-496-7100 http://www.hirose.co.kr/ germany: hirose electric europe b.v. nuremberg office neumeyerstrasse 22-26, 90411 nurnberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ germany: hirose electric europe b.v. hanover office bayernstr. 3, haus c 30855 langenhagen, germany phone : +49-511 97 82 61 30 fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ germany: hirose electric europe b.v. german branch schoenbergstr. 20, 73760 ostfildern phone : +49-711-456002-1 fax : +49-711-456002-299 http://www.hirose.com/eu/ france: hirose electric europe b.v. paris office 130 avenue joseph kessel, bat e, 78960 voisins le bretonneux, france phone : +33-1-85764886 fax : +33-1-85764823 http://www.hirose.com/eu/ the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hirose.com/eu/ united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 http://www.hirose.com/eu/ china: hirose electric (china) co., ltd. (shanghai, headquarters) 18, enterprise center tower 2, 209# gong he road, jing?an district, shanghai, china 200070 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose.com/cn/ china: hirose electric (china) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose.com/cn/ taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7355 http://www.hirose.com/tw/ hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose.com/hk/ india: hirose electric singapore pte. ltd. delhi liaison office office no.552, regus-green bo ulevard, level5, tower c, sec62, plot b-9a, block b, noida, 201301, uttar pradesh, india phone : +91-12-660-8018 fax : +91-120-4804949 http://www.hirose.com/sg/ singapore: hirose electric singapore pte. ltd. 03, anson road, #20-01, springleaf tower, singapore 079909 phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose.com/sg/ india: hirose electric singapore pte. ltd. bangalore liaison office unit no-403, 4th floor, no-84, barton centre, mahatma gandhi (mg) road, bangalore 560 001, karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose.com/sg/ malaysia: penang representative office 73-3-1, ideal@the one, jalan mahsuri, bayan lepas penang, 11950, malaysia phone : +604-648-5536 http://www.hirose.com/sg/ thailand: bangkok office (representative office) unit 4703, 47th fl., 1 empire tower, south sathorn road, yannawa, sathorn, bangkok 10120 thailand phone : +66-2-686-1255 fax : +66-2-686-3433 http://www.hirose.com/sg/
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. 2018.7 w small i/o connectors for ac adapters rp34 series features 1. superior mating operability a snap-and-lock style allows easy mating/ unmating. 2. cable direction is variable the three-position, right-angled plug makes it possible to arrange the cable to the left or right, offering flexible wiring options depending on your requirement. 3. sequential contact mating designed with sequential contact mating, one pin makes contact with its counterpart sooner than the others and establishes a securely grounded connection. 4. easy plug assembly a snap-together case eliminates the need for screws to fasten the case and helps provide for a quick plug assembly. 5. variations items number of contacts 3 or, 4 connector type plug : straight, right angle receptacle : right angle plug termination version crimp receptacle termination version pcb dip receptacle mounting method pcb dip product speci cations ratings rated current 3a operating temperature range -10 to +60 ? rated voltage ac30v , dc42v storage temperature range -10 to +60 ? items speci cations conditions 1. contact resistance 30m?max measured at dc 1a 2. insulation resistance 1,000m?min measured at dc 100v 3. withstanding voltage no ashover or dielectric breakdown. ac 150v for 1 minute 4. vibration resistance no electrical discontinuity for 10? or longer. 10 to 55hz/cycle, amplitude : 0.75mm, 3 axis directions, 2 hours each 5. shock resistance no electrical discontinuity for 10? or longer. acceleration : 490m/s 2 , duration : 11ms, 3 axis directions, 3 cycles each 6. mating cycles contact resistance : 60m?max. 1,000 times 7. temperature cycle insulation resistance : 100m?min. -55? : 30 minutes ? normal temperature : 10 to 15 minutes ? 85? : 30 minutes ? normal temperature : 10 to 15 minutes, left for 5 cycles 8. moisture resistance insulation resistance: 10m?min (at high humidities). 100m?min (when dry). temperature : 40?, relative humidity : 90 to 95%, left for 96 hours materials / finish items material finish remarks plug exterior, insulator polycarbonate resin ???? ul94v-0 clamp brass ???? ???? bushing vinyl chloride resin ???? ???? receptacle exterior, insulator pbt resin ???? ul94v-0 steel tin plating ???? male contact brass silver plating ???? crimped female contact female contact phosphor bronze silver plating ???? 1 in cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information. model name : rp34 series shell size : the shell size is the outer diameter of the mating end of the plug. shell type sp : straight plug p : right-angled plug r : receptacle number of contacts : contact form p : male contact s : female contact contact termination method : c : crimp contact termination dl : right-angled dip method other speci cations : a two-digit character is added to indicate other speci cations. model name : rp34 series contact type : sc = crimped female contact contact packaging types : 1 : loose piece contacts 2 : reel contacts applicable wire : 1 : for 18 to 22 awg 2 : for 24 to 28 awg identi cation of plating : 2 : silver plating product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. connector crimp contact rp34 - 8sp - 3 s c (71) rp34 - sc - 212 2 rp34 series small plastic connectors for ac adapters (this figure is a representative example.) (this gure is a representative example.) part no. hrs no. rp34-8p-3sc(71) 113-5041-0 71 note : cable clamping force, cable rotation force, and other aspects may differ depending on the cable construction. we recommend that you verify the suitability of the cable assembly before use or production. part no. hrs no. no. of contacts a remarks rp34-8sp-3sc(71) 113-5049-1 71 3 9.6 ???? rp34-8sp-3scd(71) 113-5061-7 71 mating key dependent type rp34-8sp-4sc(71) 113-5097-4 71 4 11 ???? note : cable clamping force, cable rotation force, and other aspects may differ depending on the cable construction. we reccomend that you verify the suitability of the cable assembly before use or production. right-angled plug straight plug rp34-8p-3sc(71) rp34-8sp-3sc(71) 32 1 ?4.4 2 10 10 18 25 7.5 18 3 2 1 ?4.4 a 10 7.5 37.5 30.5 3 rp34 series small plastic connectors for ac adapters (this figure is a representative example.) part no. hrs no. no. of contacts a b remarks rp34-8r-3pdl 113-5042-2 31011 ???? rp34-8r-3pdld 113-5066-0 mating key dependent type rp34-8r-4pdl 113-5098-7 4 11 12 ???? 3 position positioning hole (1 location) 1.9 1.9 2.75 7.4 4.75 4.75 2.1 10.5 3-?1.1 +0.1 0 +0.1 0 +0.1 0 4-?1.7 ?1.5 21 4 3 positioning hole (1 location) 4 position 5.25 5.25 4.25 5.9 0.8 0.8 2.4 2.4 2.1 10.5 ?1.5 +0.1 0 +0.1 0 +0.1 0 4-?1.7 4-?1.1 dip post arrangement for pcb layout remarks 1. the applicable pcb thickness is between 0.8 and 1.6mm. 2. a machining tolerance of ?.05 is recommended for the pcb layout. 3. the above gure shows the pcb side of the rack into which contact dip posts will be inserted. " " mark indicates the plug interface mating side. receptacle rp34-8r-3pdl part no. hrs no. b c applicable wire size remarks rp34-sc-212 113-5043-5 1.6 2.1 18 to 22 awg reel contacts rp34-sc-112 113-5076-4 1.6 2.1 18 to 22 awg loose piece contacts rp34-sc-222 113-5100-7 1.2 1.35 24 to 28 awg reel contacts rp34-sc-122 113-5102-2 1.2 1.35 24 to 28 awg loose piece contacts note : loose piece contacts are packaged 100 pcs/pack and reel contacts are available on 10,000 piece reel. please order in full quantity packs or reels. contact (female contact) a_a a a b 8.7 1.48 c 3 2 1 11.3 a 10 3 b 4 rp34 series small plastic connectors for ac adapters type items part no. hrs no. applicable contact applicable wire size machine crimping automatic crimping press cm-105c 901-0001-0 ???? ???? applicator ap105-rp34-1 901-2025-2 rp34-sc-212 18 to 22 awg ap105-rp34-2 901-2034-3 rp34-sc-222 24 to 28 awg cable crimping tool rp34-tc-01 150-0074-1 ???? ???? extraction tool rp34-sc-tp 150-0072-6 ???? ???? cable bushing metal fitting for clamping cord tube (a) or (b) s-insulation p case 2mm or more 20 2 +0.5 0 1.3 cover cord tube s-insulation p case cable crimping tool (rp34-tc-01) (the handle shape shown above is a representative example.) automatic crimping press (type cm-105c) termination procedure applicable tools straight plug rightangle plug operation procedure ? straight plug 1. first, pass the prepared cable through the bushing, and then crimp and terminate the contacts. 2. assemble the crimped and terminated contacts i nto the contact holes of the s-insulation p case. at this time, please make sure that the crimped contacts are securely engaged onto the contact holes of the s-insulation p case by lightly pulling on the cable. 3. crimp and x the metal tting for clamping with the applicable tool (rp34-tc-01). 4. assemble the s-insulation p case, metal tting for clamping, and bushing onto the cord tube (a). the s-insulation p case can be assembled in two ways, at 180?opposing angles. please make sure to select the orientation that is suitable for your purpose. 5. finally, assemble the remaining cord tube (b). the assembly has been completed. operation procedure ? right-angled plug 1. the right-angled plugs can be assembled in the same manner as the straight plugs, and the s-insulation p case can be assembled to the cord tube in one of two positions. 180?opposite each other. please make sure to select the orientation that is suitable for your purpose. 5 rp34 series small plastic connectors for ac adapters type rp34l product specifications ratings rated current 5a (when using 18 awg) operating temperature range ?25 ? to +85 ? rated voltage ac30v, dc42v storage temperature range ?10 ? to +60 ? items speci? cations conditions 1. contact resistance 30m? max. measured at dc 1a 2. insulation resistance 1,000m? min. measured at dc 100v 3. withstanding voltage no ? ashover or dielectric breakdown. ac 150v for 1 minute 4. vibration proof no electrical discontinuity 10s or longer. 10 to 55hz, half amplitude : 0.75mm, 3 axis directions, 2 hours each 5. temperature cycle insulation resistance : 100m? min -55? : 30 minutes ? normal temperature : 10 to 15 minutes ? +85? : 30 minutes ? normal temperature : 10 to 15 minutes, 5 cycles 6. corrosion resistance no corrosion that affects performance. left in 5% salt water solution for 48 hours 7. mating cycles contact resistance : 60m? max 5,000 times materials / finish items material finish remarks receptacle ? (2position) metal ? tting phosphor bronze solder plating ???? insulator polyamide resin black ul94hb contact brass palladium plating ???? plug ? (2 position) exterior vinyl chloride resin black ul94v-0 insulator polyamide resin ul94hb contact phosphor bronze silver plating ???? receptacle ? (3 position) metal ? tting phosphor bronze solder plating ???? insulator pps resin black ul94v-0 contact brass palladium plating ???? plug ? (3 position) exterior polycarbonate resin black ul94v-0 vinyl chloride resin insulator pps resin contact phosphor bronze palladium plating ???? product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. rp34l - 5pa - 2sc (****) series name : rp34l shell : indicates the shell form. type receptacle : r straight plug : pa right-angled plug : lp number of contacts : shows the number. 2 or 3 contacts. contact type pd : male contact (dip) sc : female contact (crimped) cable length : ( ****) may vary depending on the cable. 6 rp34l series small plastic connectors for ac adapters part no. hrs no. rp34l-5r-2pd(71) 113-5154-6 71 rp34l-5r-3pd(71) 113-5157-4 71 receptacle 3 position 7 9.1 5 2.5 rp34l-5r-2pd(71) rp34l-5r-3pd(71) (1.2) 1.3 0 -0.1 2.120.05 recommended panel opening dimensions (reference) pcb panel plug 7.4 +0.1 0 +0.1 0 3.9 (mating interface side) 4.30.05 4.30.05 3 40.05 4.50.05 1.150.05 2.350.05 2.350.05 2 ? ?1.5 +0.1 0 4 ? ?1.1 +0.1 0 pcb layout mounting dimensions 7.4 2.5 6.1 7 1.3 -0.1 0 recommended panel opening dimensions (reference) panel 7.5 +0.1 0 6.2 +0.1 0 (1.2) pcb (mating interface side) 3 40.05 0.20.05 1.350.05 1.350.05 3.450.05 3.450.05 2? ?1.5 +0.1 0 3? ? 1.1 +0.1 0 pcb layout dimension 2 position 2 position 3 position part no. hrs no. rp34l-5pa-2sc(1857)(71) 113-5153-3 71 rp34l-5pa-3sc(71) 113-5178-4 71 rp34l-5lp-3sc(71) 113-5161-1 71 plug rp34l-5pa-2sc(1857)(71) 1857 4.8 22.4 1800 21.5 7.6 board-in crimping contact bushing 7 9.7 6.1 7.8 ?3.5 a a_a 6 r3 single-contact shielded cable (center conductor wires: 18 awg, shielded cable: 18awg or equivalent) ?9 6 1.5 5.5 a 2.5 rp34l-5pa-3sc(71) 3.7 (external shell) 7.2 10.45 4.8 6.2 23.1 29.7 7.8 ?4.4 rp34l-5lp-3sc(71) 11.4 17.6 11 11.625 2.65 7.2 10.9 11.85 7.8 3.7 ?4.4 4.8 6.2 5.925 7 rp34l series small plastic connectors for ac adapters crimp contact rp34l-sc1-212(01) 0.3 12.7 2.2 1.6 a a section a_a part no. hrs no. rp34l-sc1-212(01) 113-5151-8 01 applicable tools type part no. hrs no. applicable contact applicable cables manual crimping tools ht-102/rp34l-sc1-212 150-0210-8 rp34l-sc1-112(01) 18 to 22 awg machine crimping automatic crimping press cm-105c 901-0001-0 -------------- -------------- applicator ap105-rp34l-sc1-212 901-2043-4 rp34l-sc1-212(01) 18 to 22 awg cable crimping tool rp34-tc-01 150-0074-1 -------------- 4 extraction tool rp6-sc-tp 150-0039-0 -------------- -------------- assembly procedure (3 position plug) straight plug s-insulation p case 5.3 (mating section) (round hole) 8 2 +0.5 0 2 1 cord tube (b) cord tube (a) bushing metal fitting for clamping cable cord tube (b) cord tube (a) (tab) right angle 11 2 s-insulation p case metal fitting for clamping 2 1 cord tube bushing metal fitting for clamping s-insulation p case cable 13.7 2 +0.5 0 1. first pass the prepared cable through the bushing, and then crimp and terminate the contacts. 2. assemble the crimped and terminated contacts into the contact holes of the s-insulation p case. at this time, please make sure that the crimped contacts are securely engaged onto the contact holes of the s-insulation p case by lightly pulling the cable. if you nd an erroneous wiring, insert the extractor (rp6-sc-tp) from the mating side to pull out the contact from the termination side, and then re- assemble. 3. crimp the metal tting for clamping with the applicable tool (rp34- tc-01). 4. align and assemble the protrusion of the s-insulation p case to the round hole of the cord tube (b). 5. attach the mating section of the metal fitting for clamping to the recess of the cord tube (b), and then assemble the bushing and metal tting for clamping onto the cord tube (b). 6. assemble the cord tube (a) onto the cord tube (b). at this time, please make sure that the four tabs of the cord tube (b) rest on the angled hole of the cord tube (a). 1. right-angled plugs can be assembled in the same manner as the straight plugs. 8 rp34l series small plastic connectors for ac adapters precautions 1. to prevent damage to the connector after mounting, make sure that it is supported with a panel or another substrate. this will prevent any type of excessive load or force on the connector. for 2 position type, please support the external shell of th e receptacle. for 3 position type, please support the external shell of the plug. y see page 3 for details on recommended panel dimensions. 2. when mated together, do not apply a load of 30 n or more on the cable in the direction indicated by the arrows. please note that an excessive tensile stress may break the connectors. (external shell) panel plug receptacle receptacle panel <2 position type> <3 position type> 3. this product series uses silver plated contacts. silver reacts easily to exposure to sulfur gas so the below conditions may cause tarnishing. y~ dusty environments y~ area with a high concentration area of gases such as sulfur dioxide gas, hydrogen sulfide gas, nitrogen dioxide gas and so on. example; in close proximity to factory exhaust, automotive emissions, etc. y~ close to heaters, or in other areas marked by extreme temperature differences or high humidity. y~ close to rubber products includes rubber adhesives. the electrical connection is not affected by tarnishing on a silver surface due to the wiping effect of the contact pins. storage packing state; packed in original packing or equivalent container temperature -10 to +60? humidity 85% max (it is recommended that the product be stored in an area of normal level of temperature and humidity, and free of any temperature fluctuation) please use this products within 6 months of delivery. (after 6 month, please check the solderbility before use) ?torage?means long-term storage of the unused products in sealed packaging, prior to assembly to pcb. 9 rp34l series small plastic connectors for ac adapters memo : 10 rp34 series small plastic connectors for ac adapters memo : 11 rp34 series small plastic connectors for ac adapters 12 rp34 series small plastic connectors for ac adapters the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 07/2018. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? usa: hirose electric (u.s.a.), inc. san jose office 2841 junction ave, suite 200 san jose, ca. 95134 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. detroit office (automotive) 17197 n. laurel park drive, suite 253, livonia, mi 48152 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. boston office 300 brickstone square suite 201, andover, ma 01810 phone : +1-978-662-5255 usa: hirose electric (u.s.a.), inc. headquarters chicago office 2300 warrenville road, suite 150, downers grove, il 60515 phone : +1-630-282-6700 http://www.hirose.com/us/ china: hirose electric (china) co., ltd. shenzhen branch room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose.com/cn/ korea: hirose korea co.,ltd. 143, gongdan 1-daero, siheung-si, gyeonggi-do, 15084, korea phone : +82-31-496-7000 fax : +82-31-496-7100 http://www.hirose.co.kr/ germany: hirose electric europe b.v. nuremberg office neumeyerstrasse 22-26, 90411 nurnberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ germany: hirose electric europe b.v. hanover office bayernstr. 3, haus c 30855 langenhagen, germany phone : +49-511 97 82 61 30 fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ germany: hirose electric europe b.v. german branch schoenbergstr. 20, 73760 ostfildern phone : +49-711-456002-1 fax : +49-711-456002-299 http://www.hirose.com/eu/ france: hirose electric europe b.v. paris office 130 avenue joseph kessel, bat e, 78960 voisins le bretonneux, france phone : +33-1-85764886 fax : +33-1-85764823 http://www.hirose.com/eu/ the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hirose.com/eu/ united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 http://www.hirose.com/eu/ china: hirose electric (china) co., ltd. (shanghai, headquarters) 18, enterprise center tower 2, 209# gong he road, jing?an district, shanghai, china 200070 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose.com/cn/ china: hirose electric (china) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose.com/cn/ taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7355 http://www.hirose.com/tw/ hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose.com/hk/ india: hirose electric singapore pte. ltd. delhi liaison office office no.552, regus-green bo ulevard, level5, tower c, sec62, plot b-9a, block b, noida, 201301, uttar pradesh, india phone : +91-12-660-8018 fax : +91-120-4804949 http://www.hirose.com/sg/ singapore: hirose electric singapore pte. ltd. 03, anson road, #20-01, springleaf tower, singapore 079909 phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose.com/sg/ india: hirose electric singapore pte. ltd. bangalore liaison office unit no-403, 4th floor, no-84, barton centre, mahatma gandhi (mg) road, bangalore 560 001, karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose.com/sg/ malaysia: penang representative office 73-3-1, ideal@the one, jalan mahsuri, bayan lepas penang, 11950, malaysia phone : +604-648-5536 http://www.hirose.com/sg/ thailand: bangkok office (representative office) unit 4703, 47th fl., 1 empire tower, south sathorn road, yannawa, sathorn, bangkok 10120 thailand phone : +66-2-686-1255 fax : +66-2-686-3433 http://www.hirose.com/sg/
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. 2018.7 w small i/o connectors for ac adapters rp34 series features 1. superior mating operability a snap-and-lock style allows easy mating/ unmating. 2. cable direction is variable the three-position, right-angled plug makes it possible to arrange the cable to the left or right, offering flexible wiring options depending on your requirement. 3. sequential contact mating designed with sequential contact mating, one pin makes contact with its counterpart sooner than the others and establishes a securely grounded connection. 4. easy plug assembly a snap-together case eliminates the need for screws to fasten the case and helps provide for a quick plug assembly. 5. variations items number of contacts 3 or, 4 connector type plug : straight, right angle receptacle : right angle plug termination version crimp receptacle termination version pcb dip receptacle mounting method pcb dip product speci cations ratings rated current 3a operating temperature range -10 to +60 ? rated voltage ac30v , dc42v storage temperature range -10 to +60 ? items speci cations conditions 1. contact resistance 30m?max measured at dc 1a 2. insulation resistance 1,000m?min measured at dc 100v 3. withstanding voltage no ashover or dielectric breakdown. ac 150v for 1 minute 4. vibration resistance no electrical discontinuity for 10? or longer. 10 to 55hz/cycle, amplitude : 0.75mm, 3 axis directions, 2 hours each 5. shock resistance no electrical discontinuity for 10? or longer. acceleration : 490m/s 2 , duration : 11ms, 3 axis directions, 3 cycles each 6. mating cycles contact resistance : 60m?max. 1,000 times 7. temperature cycle insulation resistance : 100m?min. -55? : 30 minutes ? normal temperature : 10 to 15 minutes ? 85? : 30 minutes ? normal temperature : 10 to 15 minutes, left for 5 cycles 8. moisture resistance insulation resistance: 10m?min (at high humidities). 100m?min (when dry). temperature : 40?, relative humidity : 90 to 95%, left for 96 hours materials / finish items material finish remarks plug exterior, insulator polycarbonate resin ???? ul94v-0 clamp brass ???? ???? bushing vinyl chloride resin ???? ???? receptacle exterior, insulator pbt resin ???? ul94v-0 steel tin plating ???? male contact brass silver plating ???? crimped female contact female contact phosphor bronze silver plating ???? 1 in cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information. model name : rp34 series shell size : the shell size is the outer diameter of the mating end of the plug. shell type sp : straight plug p : right-angled plug r : receptacle number of contacts : contact form p : male contact s : female contact contact termination method : c : crimp contact termination dl : right-angled dip method other speci cations : a two-digit character is added to indicate other speci cations. model name : rp34 series contact type : sc = crimped female contact contact packaging types : 1 : loose piece contacts 2 : reel contacts applicable wire : 1 : for 18 to 22 awg 2 : for 24 to 28 awg identi cation of plating : 2 : silver plating product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. connector crimp contact rp34 - 8sp - 3 s c (71) rp34 - sc - 212 2 rp34 series small plastic connectors for ac adapters (this figure is a representative example.) (this gure is a representative example.) part no. hrs no. rp34-8p-3sc(71) 113-5041-0 71 note : cable clamping force, cable rotation force, and other aspects may differ depending on the cable construction. we recommend that you verify the suitability of the cable assembly before use or production. part no. hrs no. no. of contacts a remarks rp34-8sp-3sc(71) 113-5049-1 71 3 9.6 ???? rp34-8sp-3scd(71) 113-5061-7 71 mating key dependent type rp34-8sp-4sc(71) 113-5097-4 71 4 11 ???? note : cable clamping force, cable rotation force, and other aspects may differ depending on the cable construction. we reccomend that you verify the suitability of the cable assembly before use or production. right-angled plug straight plug rp34-8p-3sc(71) rp34-8sp-3sc(71) 32 1 ?4.4 2 10 10 18 25 7.5 18 3 2 1 ?4.4 a 10 7.5 37.5 30.5 3 rp34 series small plastic connectors for ac adapters (this figure is a representative example.) part no. hrs no. no. of contacts a b remarks rp34-8r-3pdl 113-5042-2 31011 ???? rp34-8r-3pdld 113-5066-0 mating key dependent type rp34-8r-4pdl 113-5098-7 4 11 12 ???? 3 position positioning hole (1 location) 1.9 1.9 2.75 7.4 4.75 4.75 2.1 10.5 3-?1.1 +0.1 0 +0.1 0 +0.1 0 4-?1.7 ?1.5 21 4 3 positioning hole (1 location) 4 position 5.25 5.25 4.25 5.9 0.8 0.8 2.4 2.4 2.1 10.5 ?1.5 +0.1 0 +0.1 0 +0.1 0 4-?1.7 4-?1.1 dip post arrangement for pcb layout remarks 1. the applicable pcb thickness is between 0.8 and 1.6mm. 2. a machining tolerance of ?.05 is recommended for the pcb layout. 3. the above gure shows the pcb side of the rack into which contact dip posts will be inserted. " " mark indicates the plug interface mating side. receptacle rp34-8r-3pdl part no. hrs no. b c applicable wire size remarks rp34-sc-212 113-5043-5 1.6 2.1 18 to 22 awg reel contacts rp34-sc-112 113-5076-4 1.6 2.1 18 to 22 awg loose piece contacts rp34-sc-222 113-5100-7 1.2 1.35 24 to 28 awg reel contacts rp34-sc-122 113-5102-2 1.2 1.35 24 to 28 awg loose piece contacts note : loose piece contacts are packaged 100 pcs/pack and reel contacts are available on 10,000 piece reel. please order in full quantity packs or reels. contact (female contact) a_a a a b 8.7 1.48 c 3 2 1 11.3 a 10 3 b 4 rp34 series small plastic connectors for ac adapters type items part no. hrs no. applicable contact applicable wire size machine crimping automatic crimping press cm-105c 901-0001-0 ???? ???? applicator ap105-rp34-1 901-2025-2 rp34-sc-212 18 to 22 awg ap105-rp34-2 901-2034-3 rp34-sc-222 24 to 28 awg cable crimping tool rp34-tc-01 150-0074-1 ???? ???? extraction tool rp34-sc-tp 150-0072-6 ???? ???? cable bushing metal fitting for clamping cord tube (a) or (b) s-insulation p case 2mm or more 20 2 +0.5 0 1.3 cover cord tube s-insulation p case cable crimping tool (rp34-tc-01) (the handle shape shown above is a representative example.) automatic crimping press (type cm-105c) termination procedure applicable tools straight plug rightangle plug operation procedure ? straight plug 1. first, pass the prepared cable through the bushing, and then crimp and terminate the contacts. 2. assemble the crimped and terminated contacts i nto the contact holes of the s-insulation p case. at this time, please make sure that the crimped contacts are securely engaged onto the contact holes of the s-insulation p case by lightly pulling on the cable. 3. crimp and x the metal tting for clamping with the applicable tool (rp34-tc-01). 4. assemble the s-insulation p case, metal tting for clamping, and bushing onto the cord tube (a). the s-insulation p case can be assembled in two ways, at 180?opposing angles. please make sure to select the orientation that is suitable for your purpose. 5. finally, assemble the remaining cord tube (b). the assembly has been completed. operation procedure ? right-angled plug 1. the right-angled plugs can be assembled in the same manner as the straight plugs, and the s-insulation p case can be assembled to the cord tube in one of two positions. 180?opposite each other. please make sure to select the orientation that is suitable for your purpose. 5 rp34 series small plastic connectors for ac adapters type rp34l product specifications ratings rated current 5a (when using 18 awg) operating temperature range ?25 ? to +85 ? rated voltage ac30v, dc42v storage temperature range ?10 ? to +60 ? items speci? cations conditions 1. contact resistance 30m? max. measured at dc 1a 2. insulation resistance 1,000m? min. measured at dc 100v 3. withstanding voltage no ? ashover or dielectric breakdown. ac 150v for 1 minute 4. vibration proof no electrical discontinuity 10s or longer. 10 to 55hz, half amplitude : 0.75mm, 3 axis directions, 2 hours each 5. temperature cycle insulation resistance : 100m? min -55? : 30 minutes ? normal temperature : 10 to 15 minutes ? +85? : 30 minutes ? normal temperature : 10 to 15 minutes, 5 cycles 6. corrosion resistance no corrosion that affects performance. left in 5% salt water solution for 48 hours 7. mating cycles contact resistance : 60m? max 5,000 times materials / finish items material finish remarks receptacle ? (2position) metal ? tting phosphor bronze solder plating ???? insulator polyamide resin black ul94hb contact brass palladium plating ???? plug ? (2 position) exterior vinyl chloride resin black ul94v-0 insulator polyamide resin ul94hb contact phosphor bronze silver plating ???? receptacle ? (3 position) metal ? tting phosphor bronze solder plating ???? insulator pps resin black ul94v-0 contact brass palladium plating ???? plug ? (3 position) exterior polycarbonate resin black ul94v-0 vinyl chloride resin insulator pps resin contact phosphor bronze palladium plating ???? product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. rp34l - 5pa - 2sc (****) series name : rp34l shell : indicates the shell form. type receptacle : r straight plug : pa right-angled plug : lp number of contacts : shows the number. 2 or 3 contacts. contact type pd : male contact (dip) sc : female contact (crimped) cable length : ( ****) may vary depending on the cable. 6 rp34l series small plastic connectors for ac adapters part no. hrs no. rp34l-5r-2pd(71) 113-5154-6 71 rp34l-5r-3pd(71) 113-5157-4 71 receptacle 3 position 7 9.1 5 2.5 rp34l-5r-2pd(71) rp34l-5r-3pd(71) (1.2) 1.3 0 -0.1 2.120.05 recommended panel opening dimensions (reference) pcb panel plug 7.4 +0.1 0 +0.1 0 3.9 (mating interface side) 4.30.05 4.30.05 3 40.05 4.50.05 1.150.05 2.350.05 2.350.05 2 ? ?1.5 +0.1 0 4 ? ?1.1 +0.1 0 pcb layout mounting dimensions 7.4 2.5 6.1 7 1.3 -0.1 0 recommended panel opening dimensions (reference) panel 7.5 +0.1 0 6.2 +0.1 0 (1.2) pcb (mating interface side) 3 40.05 0.20.05 1.350.05 1.350.05 3.450.05 3.450.05 2? ?1.5 +0.1 0 3? ? 1.1 +0.1 0 pcb layout dimension 2 position 2 position 3 position part no. hrs no. rp34l-5pa-2sc(1857)(71) 113-5153-3 71 rp34l-5pa-3sc(71) 113-5178-4 71 rp34l-5lp-3sc(71) 113-5161-1 71 plug rp34l-5pa-2sc(1857)(71) 1857 4.8 22.4 1800 21.5 7.6 board-in crimping contact bushing 7 9.7 6.1 7.8 ?3.5 a a_a 6 r3 single-contact shielded cable (center conductor wires: 18 awg, shielded cable: 18awg or equivalent) ?9 6 1.5 5.5 a 2.5 rp34l-5pa-3sc(71) 3.7 (external shell) 7.2 10.45 4.8 6.2 23.1 29.7 7.8 ?4.4 rp34l-5lp-3sc(71) 11.4 17.6 11 11.625 2.65 7.2 10.9 11.85 7.8 3.7 ?4.4 4.8 6.2 5.925 7 rp34l series small plastic connectors for ac adapters crimp contact rp34l-sc1-212(01) 0.3 12.7 2.2 1.6 a a section a_a part no. hrs no. rp34l-sc1-212(01) 113-5151-8 01 applicable tools type part no. hrs no. applicable contact applicable cables manual crimping tools ht-102/rp34l-sc1-212 150-0210-8 rp34l-sc1-112(01) 18 to 22 awg machine crimping automatic crimping press cm-105c 901-0001-0 -------------- -------------- applicator ap105-rp34l-sc1-212 901-2043-4 rp34l-sc1-212(01) 18 to 22 awg cable crimping tool rp34-tc-01 150-0074-1 -------------- 4 extraction tool rp6-sc-tp 150-0039-0 -------------- -------------- assembly procedure (3 position plug) straight plug s-insulation p case 5.3 (mating section) (round hole) 8 2 +0.5 0 2 1 cord tube (b) cord tube (a) bushing metal fitting for clamping cable cord tube (b) cord tube (a) (tab) right angle 11 2 s-insulation p case metal fitting for clamping 2 1 cord tube bushing metal fitting for clamping s-insulation p case cable 13.7 2 +0.5 0 1. first pass the prepared cable through the bushing, and then crimp and terminate the contacts. 2. assemble the crimped and terminated contacts into the contact holes of the s-insulation p case. at this time, please make sure that the crimped contacts are securely engaged onto the contact holes of the s-insulation p case by lightly pulling the cable. if you nd an erroneous wiring, insert the extractor (rp6-sc-tp) from the mating side to pull out the contact from the termination side, and then re- assemble. 3. crimp the metal tting for clamping with the applicable tool (rp34- tc-01). 4. align and assemble the protrusion of the s-insulation p case to the round hole of the cord tube (b). 5. attach the mating section of the metal fitting for clamping to the recess of the cord tube (b), and then assemble the bushing and metal tting for clamping onto the cord tube (b). 6. assemble the cord tube (a) onto the cord tube (b). at this time, please make sure that the four tabs of the cord tube (b) rest on the angled hole of the cord tube (a). 1. right-angled plugs can be assembled in the same manner as the straight plugs. 8 rp34l series small plastic connectors for ac adapters precautions 1. to prevent damage to the connector after mounting, make sure that it is supported with a panel or another substrate. this will prevent any type of excessive load or force on the connector. for 2 position type, please support the external shell of th e receptacle. for 3 position type, please support the external shell of the plug. y see page 3 for details on recommended panel dimensions. 2. when mated together, do not apply a load of 30 n or more on the cable in the direction indicated by the arrows. please note that an excessive tensile stress may break the connectors. (external shell) panel plug receptacle receptacle panel <2 position type> <3 position type> 3. this product series uses silver plated contacts. silver reacts easily to exposure to sulfur gas so the below conditions may cause tarnishing. y~ dusty environments y~ area with a high concentration area of gases such as sulfur dioxide gas, hydrogen sulfide gas, nitrogen dioxide gas and so on. example; in close proximity to factory exhaust, automotive emissions, etc. y~ close to heaters, or in other areas marked by extreme temperature differences or high humidity. y~ close to rubber products includes rubber adhesives. the electrical connection is not affected by tarnishing on a silver surface due to the wiping effect of the contact pins. storage packing state; packed in original packing or equivalent container temperature -10 to +60? humidity 85% max (it is recommended that the product be stored in an area of normal level of temperature and humidity, and free of any temperature fluctuation) please use this products within 6 months of delivery. (after 6 month, please check the solderbility before use) ?torage?means long-term storage of the unused products in sealed packaging, prior to assembly to pcb. 9 rp34l series small plastic connectors for ac adapters memo : 10 rp34 series small plastic connectors for ac adapters memo : 11 rp34 series small plastic connectors for ac adapters 12 rp34 series small plastic connectors for ac adapters the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 07/2018. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? usa: hirose electric (u.s.a.), inc. san jose office 2841 junction ave, suite 200 san jose, ca. 95134 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. detroit office (automotive) 17197 n. laurel park drive, suite 253, livonia, mi 48152 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. boston office 300 brickstone square suite 201, andover, ma 01810 phone : +1-978-662-5255 usa: hirose electric (u.s.a.), inc. headquarters chicago office 2300 warrenville road, suite 150, downers grove, il 60515 phone : +1-630-282-6700 http://www.hirose.com/us/ china: hirose electric (china) co., ltd. shenzhen branch room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose.com/cn/ korea: hirose korea co.,ltd. 143, gongdan 1-daero, siheung-si, gyeonggi-do, 15084, korea phone : +82-31-496-7000 fax : +82-31-496-7100 http://www.hirose.co.kr/ germany: hirose electric europe b.v. nuremberg office neumeyerstrasse 22-26, 90411 nurnberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ germany: hirose electric europe b.v. hanover office bayernstr. 3, haus c 30855 langenhagen, germany phone : +49-511 97 82 61 30 fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ germany: hirose electric europe b.v. german branch schoenbergstr. 20, 73760 ostfildern phone : +49-711-456002-1 fax : +49-711-456002-299 http://www.hirose.com/eu/ france: hirose electric europe b.v. paris office 130 avenue joseph kessel, bat e, 78960 voisins le bretonneux, france phone : +33-1-85764886 fax : +33-1-85764823 http://www.hirose.com/eu/ the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hirose.com/eu/ united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 http://www.hirose.com/eu/ china: hirose electric (china) co., ltd. (shanghai, headquarters) 18, enterprise center tower 2, 209# gong he road, jing?an district, shanghai, china 200070 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose.com/cn/ china: hirose electric (china) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose.com/cn/ taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7355 http://www.hirose.com/tw/ hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose.com/hk/ india: hirose electric singapore pte. ltd. delhi liaison office office no.552, regus-green bo ulevard, level5, tower c, sec62, plot b-9a, block b, noida, 201301, uttar pradesh, india phone : +91-12-660-8018 fax : +91-120-4804949 http://www.hirose.com/sg/ singapore: hirose electric singapore pte. ltd. 03, anson road, #20-01, springleaf tower, singapore 079909 phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose.com/sg/ india: hirose electric singapore pte. ltd. bangalore liaison office unit no-403, 4th floor, no-84, barton centre, mahatma gandhi (mg) road, bangalore 560 001, karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose.com/sg/ malaysia: penang representative office 73-3-1, ideal@the one, jalan mahsuri, bayan lepas penang, 11950, malaysia phone : +604-648-5536 http://www.hirose.com/sg/ thailand: bangkok office (representative office) unit 4703, 47th fl., 1 empire tower, south sathorn road, yannawa, sathorn, bangkok 10120 thailand phone : +66-2-686-1255 fax : +66-2-686-3433 http://www.hirose.com/sg/
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. 2018.7 w small i/o connectors for ac adapters rp34 series features 1. superior mating operability a snap-and-lock style allows easy mating/ unmating. 2. cable direction is variable the three-position, right-angled plug makes it possible to arrange the cable to the left or right, offering flexible wiring options depending on your requirement. 3. sequential contact mating designed with sequential contact mating, one pin makes contact with its counterpart sooner than the others and establishes a securely grounded connection. 4. easy plug assembly a snap-together case eliminates the need for screws to fasten the case and helps provide for a quick plug assembly. 5. variations items number of contacts 3 or, 4 connector type plug : straight, right angle receptacle : right angle plug termination version crimp receptacle termination version pcb dip receptacle mounting method pcb dip product speci cations ratings rated current 3a operating temperature range -10 to +60 ? rated voltage ac30v , dc42v storage temperature range -10 to +60 ? items speci cations conditions 1. contact resistance 30m?max measured at dc 1a 2. insulation resistance 1,000m?min measured at dc 100v 3. withstanding voltage no ashover or dielectric breakdown. ac 150v for 1 minute 4. vibration resistance no electrical discontinuity for 10? or longer. 10 to 55hz/cycle, amplitude : 0.75mm, 3 axis directions, 2 hours each 5. shock resistance no electrical discontinuity for 10? or longer. acceleration : 490m/s 2 , duration : 11ms, 3 axis directions, 3 cycles each 6. mating cycles contact resistance : 60m?max. 1,000 times 7. temperature cycle insulation resistance : 100m?min. -55? : 30 minutes ? normal temperature : 10 to 15 minutes ? 85? : 30 minutes ? normal temperature : 10 to 15 minutes, left for 5 cycles 8. moisture resistance insulation resistance: 10m?min (at high humidities). 100m?min (when dry). temperature : 40?, relative humidity : 90 to 95%, left for 96 hours materials / finish items material finish remarks plug exterior, insulator polycarbonate resin ???? ul94v-0 clamp brass ???? ???? bushing vinyl chloride resin ???? ???? receptacle exterior, insulator pbt resin ???? ul94v-0 steel tin plating ???? male contact brass silver plating ???? crimped female contact female contact phosphor bronze silver plating ???? 1 in cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information. model name : rp34 series shell size : the shell size is the outer diameter of the mating end of the plug. shell type sp : straight plug p : right-angled plug r : receptacle number of contacts : contact form p : male contact s : female contact contact termination method : c : crimp contact termination dl : right-angled dip method other speci cations : a two-digit character is added to indicate other speci cations. model name : rp34 series contact type : sc = crimped female contact contact packaging types : 1 : loose piece contacts 2 : reel contacts applicable wire : 1 : for 18 to 22 awg 2 : for 24 to 28 awg identi cation of plating : 2 : silver plating product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. connector crimp contact rp34 - 8sp - 3 s c (71) rp34 - sc - 212 2 rp34 series small plastic connectors for ac adapters (this figure is a representative example.) (this gure is a representative example.) part no. hrs no. rp34-8p-3sc(71) 113-5041-0 71 note : cable clamping force, cable rotation force, and other aspects may differ depending on the cable construction. we recommend that you verify the suitability of the cable assembly before use or production. part no. hrs no. no. of contacts a remarks rp34-8sp-3sc(71) 113-5049-1 71 3 9.6 ???? rp34-8sp-3scd(71) 113-5061-7 71 mating key dependent type rp34-8sp-4sc(71) 113-5097-4 71 4 11 ???? note : cable clamping force, cable rotation force, and other aspects may differ depending on the cable construction. we reccomend that you verify the suitability of the cable assembly before use or production. right-angled plug straight plug rp34-8p-3sc(71) rp34-8sp-3sc(71) 32 1 ?4.4 2 10 10 18 25 7.5 18 3 2 1 ?4.4 a 10 7.5 37.5 30.5 3 rp34 series small plastic connectors for ac adapters (this figure is a representative example.) part no. hrs no. no. of contacts a b remarks rp34-8r-3pdl 113-5042-2 31011 ???? rp34-8r-3pdld 113-5066-0 mating key dependent type rp34-8r-4pdl 113-5098-7 4 11 12 ???? 3 position positioning hole (1 location) 1.9 1.9 2.75 7.4 4.75 4.75 2.1 10.5 3-?1.1 +0.1 0 +0.1 0 +0.1 0 4-?1.7 ?1.5 21 4 3 positioning hole (1 location) 4 position 5.25 5.25 4.25 5.9 0.8 0.8 2.4 2.4 2.1 10.5 ?1.5 +0.1 0 +0.1 0 +0.1 0 4-?1.7 4-?1.1 dip post arrangement for pcb layout remarks 1. the applicable pcb thickness is between 0.8 and 1.6mm. 2. a machining tolerance of ?.05 is recommended for the pcb layout. 3. the above gure shows the pcb side of the rack into which contact dip posts will be inserted. " " mark indicates the plug interface mating side. receptacle rp34-8r-3pdl part no. hrs no. b c applicable wire size remarks rp34-sc-212 113-5043-5 1.6 2.1 18 to 22 awg reel contacts rp34-sc-112 113-5076-4 1.6 2.1 18 to 22 awg loose piece contacts rp34-sc-222 113-5100-7 1.2 1.35 24 to 28 awg reel contacts rp34-sc-122 113-5102-2 1.2 1.35 24 to 28 awg loose piece contacts note : loose piece contacts are packaged 100 pcs/pack and reel contacts are available on 10,000 piece reel. please order in full quantity packs or reels. contact (female contact) a_a a a b 8.7 1.48 c 3 2 1 11.3 a 10 3 b 4 rp34 series small plastic connectors for ac adapters type items part no. hrs no. applicable contact applicable wire size machine crimping automatic crimping press cm-105c 901-0001-0 ???? ???? applicator ap105-rp34-1 901-2025-2 rp34-sc-212 18 to 22 awg ap105-rp34-2 901-2034-3 rp34-sc-222 24 to 28 awg cable crimping tool rp34-tc-01 150-0074-1 ???? ???? extraction tool rp34-sc-tp 150-0072-6 ???? ???? cable bushing metal fitting for clamping cord tube (a) or (b) s-insulation p case 2mm or more 20 2 +0.5 0 1.3 cover cord tube s-insulation p case cable crimping tool (rp34-tc-01) (the handle shape shown above is a representative example.) automatic crimping press (type cm-105c) termination procedure applicable tools straight plug rightangle plug operation procedure ? straight plug 1. first, pass the prepared cable through the bushing, and then crimp and terminate the contacts. 2. assemble the crimped and terminated contacts i nto the contact holes of the s-insulation p case. at this time, please make sure that the crimped contacts are securely engaged onto the contact holes of the s-insulation p case by lightly pulling on the cable. 3. crimp and x the metal tting for clamping with the applicable tool (rp34-tc-01). 4. assemble the s-insulation p case, metal tting for clamping, and bushing onto the cord tube (a). the s-insulation p case can be assembled in two ways, at 180?opposing angles. please make sure to select the orientation that is suitable for your purpose. 5. finally, assemble the remaining cord tube (b). the assembly has been completed. operation procedure ? right-angled plug 1. the right-angled plugs can be assembled in the same manner as the straight plugs, and the s-insulation p case can be assembled to the cord tube in one of two positions. 180?opposite each other. please make sure to select the orientation that is suitable for your purpose. 5 rp34 series small plastic connectors for ac adapters type rp34l product specifications ratings rated current 5a (when using 18 awg) operating temperature range ?25 ? to +85 ? rated voltage ac30v, dc42v storage temperature range ?10 ? to +60 ? items speci? cations conditions 1. contact resistance 30m? max. measured at dc 1a 2. insulation resistance 1,000m? min. measured at dc 100v 3. withstanding voltage no ? ashover or dielectric breakdown. ac 150v for 1 minute 4. vibration proof no electrical discontinuity 10s or longer. 10 to 55hz, half amplitude : 0.75mm, 3 axis directions, 2 hours each 5. temperature cycle insulation resistance : 100m? min -55? : 30 minutes ? normal temperature : 10 to 15 minutes ? +85? : 30 minutes ? normal temperature : 10 to 15 minutes, 5 cycles 6. corrosion resistance no corrosion that affects performance. left in 5% salt water solution for 48 hours 7. mating cycles contact resistance : 60m? max 5,000 times materials / finish items material finish remarks receptacle ? (2position) metal ? tting phosphor bronze solder plating ???? insulator polyamide resin black ul94hb contact brass palladium plating ???? plug ? (2 position) exterior vinyl chloride resin black ul94v-0 insulator polyamide resin ul94hb contact phosphor bronze silver plating ???? receptacle ? (3 position) metal ? tting phosphor bronze solder plating ???? insulator pps resin black ul94v-0 contact brass palladium plating ???? plug ? (3 position) exterior polycarbonate resin black ul94v-0 vinyl chloride resin insulator pps resin contact phosphor bronze palladium plating ???? product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. rp34l - 5pa - 2sc (****) series name : rp34l shell : indicates the shell form. type receptacle : r straight plug : pa right-angled plug : lp number of contacts : shows the number. 2 or 3 contacts. contact type pd : male contact (dip) sc : female contact (crimped) cable length : ( ****) may vary depending on the cable. 6 rp34l series small plastic connectors for ac adapters part no. hrs no. rp34l-5r-2pd(71) 113-5154-6 71 rp34l-5r-3pd(71) 113-5157-4 71 receptacle 3 position 7 9.1 5 2.5 rp34l-5r-2pd(71) rp34l-5r-3pd(71) (1.2) 1.3 0 -0.1 2.120.05 recommended panel opening dimensions (reference) pcb panel plug 7.4 +0.1 0 +0.1 0 3.9 (mating interface side) 4.30.05 4.30.05 3 40.05 4.50.05 1.150.05 2.350.05 2.350.05 2 ? ?1.5 +0.1 0 4 ? ?1.1 +0.1 0 pcb layout mounting dimensions 7.4 2.5 6.1 7 1.3 -0.1 0 recommended panel opening dimensions (reference) panel 7.5 +0.1 0 6.2 +0.1 0 (1.2) pcb (mating interface side) 3 40.05 0.20.05 1.350.05 1.350.05 3.450.05 3.450.05 2? ?1.5 +0.1 0 3? ? 1.1 +0.1 0 pcb layout dimension 2 position 2 position 3 position part no. hrs no. rp34l-5pa-2sc(1857)(71) 113-5153-3 71 rp34l-5pa-3sc(71) 113-5178-4 71 rp34l-5lp-3sc(71) 113-5161-1 71 plug rp34l-5pa-2sc(1857)(71) 1857 4.8 22.4 1800 21.5 7.6 board-in crimping contact bushing 7 9.7 6.1 7.8 ?3.5 a a_a 6 r3 single-contact shielded cable (center conductor wires: 18 awg, shielded cable: 18awg or equivalent) ?9 6 1.5 5.5 a 2.5 rp34l-5pa-3sc(71) 3.7 (external shell) 7.2 10.45 4.8 6.2 23.1 29.7 7.8 ?4.4 rp34l-5lp-3sc(71) 11.4 17.6 11 11.625 2.65 7.2 10.9 11.85 7.8 3.7 ?4.4 4.8 6.2 5.925 7 rp34l series small plastic connectors for ac adapters crimp contact rp34l-sc1-212(01) 0.3 12.7 2.2 1.6 a a section a_a part no. hrs no. rp34l-sc1-212(01) 113-5151-8 01 applicable tools type part no. hrs no. applicable contact applicable cables manual crimping tools ht-102/rp34l-sc1-212 150-0210-8 rp34l-sc1-112(01) 18 to 22 awg machine crimping automatic crimping press cm-105c 901-0001-0 -------------- -------------- applicator ap105-rp34l-sc1-212 901-2043-4 rp34l-sc1-212(01) 18 to 22 awg cable crimping tool rp34-tc-01 150-0074-1 -------------- 4 extraction tool rp6-sc-tp 150-0039-0 -------------- -------------- assembly procedure (3 position plug) straight plug s-insulation p case 5.3 (mating section) (round hole) 8 2 +0.5 0 2 1 cord tube (b) cord tube (a) bushing metal fitting for clamping cable cord tube (b) cord tube (a) (tab) right angle 11 2 s-insulation p case metal fitting for clamping 2 1 cord tube bushing metal fitting for clamping s-insulation p case cable 13.7 2 +0.5 0 1. first pass the prepared cable through the bushing, and then crimp and terminate the contacts. 2. assemble the crimped and terminated contacts into the contact holes of the s-insulation p case. at this time, please make sure that the crimped contacts are securely engaged onto the contact holes of the s-insulation p case by lightly pulling the cable. if you nd an erroneous wiring, insert the extractor (rp6-sc-tp) from the mating side to pull out the contact from the termination side, and then re- assemble. 3. crimp the metal tting for clamping with the applicable tool (rp34- tc-01). 4. align and assemble the protrusion of the s-insulation p case to the round hole of the cord tube (b). 5. attach the mating section of the metal fitting for clamping to the recess of the cord tube (b), and then assemble the bushing and metal tting for clamping onto the cord tube (b). 6. assemble the cord tube (a) onto the cord tube (b). at this time, please make sure that the four tabs of the cord tube (b) rest on the angled hole of the cord tube (a). 1. right-angled plugs can be assembled in the same manner as the straight plugs. 8 rp34l series small plastic connectors for ac adapters precautions 1. to prevent damage to the connector after mounting, make sure that it is supported with a panel or another substrate. this will prevent any type of excessive load or force on the connector. for 2 position type, please support the external shell of th e receptacle. for 3 position type, please support the external shell of the plug. y see page 3 for details on recommended panel dimensions. 2. when mated together, do not apply a load of 30 n or more on the cable in the direction indicated by the arrows. please note that an excessive tensile stress may break the connectors. (external shell) panel plug receptacle receptacle panel <2 position type> <3 position type> 3. this product series uses silver plated contacts. silver reacts easily to exposure to sulfur gas so the below conditions may cause tarnishing. y~ dusty environments y~ area with a high concentration area of gases such as sulfur dioxide gas, hydrogen sulfide gas, nitrogen dioxide gas and so on. example; in close proximity to factory exhaust, automotive emissions, etc. y~ close to heaters, or in other areas marked by extreme temperature differences or high humidity. y~ close to rubber products includes rubber adhesives. the electrical connection is not affected by tarnishing on a silver surface due to the wiping effect of the contact pins. storage packing state; packed in original packing or equivalent container temperature -10 to +60? humidity 85% max (it is recommended that the product be stored in an area of normal level of temperature and humidity, and free of any temperature fluctuation) please use this products within 6 months of delivery. (after 6 month, please check the solderbility before use) ?torage?means long-term storage of the unused products in sealed packaging, prior to assembly to pcb. 9 rp34l series small plastic connectors for ac adapters memo : 10 rp34 series small plastic connectors for ac adapters memo : 11 rp34 series small plastic connectors for ac adapters 12 rp34 series small plastic connectors for ac adapters the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 07/2018. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? usa: hirose electric (u.s.a.), inc. san jose office 2841 junction ave, suite 200 san jose, ca. 95134 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. detroit office (automotive) 17197 n. laurel park drive, suite 253, livonia, mi 48152 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. boston office 300 brickstone square suite 201, andover, ma 01810 phone : +1-978-662-5255 usa: hirose electric (u.s.a.), inc. headquarters chicago office 2300 warrenville road, suite 150, downers grove, il 60515 phone : +1-630-282-6700 http://www.hirose.com/us/ china: hirose electric (china) co., ltd. shenzhen branch room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose.com/cn/ korea: hirose korea co.,ltd. 143, gongdan 1-daero, siheung-si, gyeonggi-do, 15084, korea phone : +82-31-496-7000 fax : +82-31-496-7100 http://www.hirose.co.kr/ germany: hirose electric europe b.v. nuremberg office neumeyerstrasse 22-26, 90411 nurnberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ germany: hirose electric europe b.v. hanover office bayernstr. 3, haus c 30855 langenhagen, germany phone : +49-511 97 82 61 30 fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ germany: hirose electric europe b.v. german branch schoenbergstr. 20, 73760 ostfildern phone : +49-711-456002-1 fax : +49-711-456002-299 http://www.hirose.com/eu/ france: hirose electric europe b.v. paris office 130 avenue joseph kessel, bat e, 78960 voisins le bretonneux, france phone : +33-1-85764886 fax : +33-1-85764823 http://www.hirose.com/eu/ the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hirose.com/eu/ united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 http://www.hirose.com/eu/ china: hirose electric (china) co., ltd. (shanghai, headquarters) 18, enterprise center tower 2, 209# gong he road, jing?an district, shanghai, china 200070 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose.com/cn/ china: hirose electric (china) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose.com/cn/ taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7355 http://www.hirose.com/tw/ hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose.com/hk/ india: hirose electric singapore pte. ltd. delhi liaison office office no.552, regus-green bo ulevard, level5, tower c, sec62, plot b-9a, block b, noida, 201301, uttar pradesh, india phone : +91-12-660-8018 fax : +91-120-4804949 http://www.hirose.com/sg/ singapore: hirose electric singapore pte. ltd. 03, anson road, #20-01, springleaf tower, singapore 079909 phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose.com/sg/ india: hirose electric singapore pte. ltd. bangalore liaison office unit no-403, 4th floor, no-84, barton centre, mahatma gandhi (mg) road, bangalore 560 001, karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose.com/sg/ malaysia: penang representative office 73-3-1, ideal@the one, jalan mahsuri, bayan lepas penang, 11950, malaysia phone : +604-648-5536 http://www.hirose.com/sg/ thailand: bangkok office (representative office) unit 4703, 47th fl., 1 empire tower, south sathorn road, yannawa, sathorn, bangkok 10120 thailand phone : +66-2-686-1255 fax : +66-2-686-3433 http://www.hirose.com/sg/
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. 2018.7 w small i/o connectors for ac adapters rp34 series features 1. superior mating operability a snap-and-lock style allows easy mating/ unmating. 2. cable direction is variable the three-position, right-angled plug makes it possible to arrange the cable to the left or right, offering flexible wiring options depending on your requirement. 3. sequential contact mating designed with sequential contact mating, one pin makes contact with its counterpart sooner than the others and establishes a securely grounded connection. 4. easy plug assembly a snap-together case eliminates the need for screws to fasten the case and helps provide for a quick plug assembly. 5. variations items number of contacts 3 or, 4 connector type plug : straight, right angle receptacle : right angle plug termination version crimp receptacle termination version pcb dip receptacle mounting method pcb dip product speci cations ratings rated current 3a operating temperature range -10 to +60 ? rated voltage ac30v , dc42v storage temperature range -10 to +60 ? items speci cations conditions 1. contact resistance 30m?max measured at dc 1a 2. insulation resistance 1,000m?min measured at dc 100v 3. withstanding voltage no ashover or dielectric breakdown. ac 150v for 1 minute 4. vibration resistance no electrical discontinuity for 10? or longer. 10 to 55hz/cycle, amplitude : 0.75mm, 3 axis directions, 2 hours each 5. shock resistance no electrical discontinuity for 10? or longer. acceleration : 490m/s 2 , duration : 11ms, 3 axis directions, 3 cycles each 6. mating cycles contact resistance : 60m?max. 1,000 times 7. temperature cycle insulation resistance : 100m?min. -55? : 30 minutes ? normal temperature : 10 to 15 minutes ? 85? : 30 minutes ? normal temperature : 10 to 15 minutes, left for 5 cycles 8. moisture resistance insulation resistance: 10m?min (at high humidities). 100m?min (when dry). temperature : 40?, relative humidity : 90 to 95%, left for 96 hours materials / finish items material finish remarks plug exterior, insulator polycarbonate resin ???? ul94v-0 clamp brass ???? ???? bushing vinyl chloride resin ???? ???? receptacle exterior, insulator pbt resin ???? ul94v-0 steel tin plating ???? male contact brass silver plating ???? crimped female contact female contact phosphor bronze silver plating ???? 1 in cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information. model name : rp34 series shell size : the shell size is the outer diameter of the mating end of the plug. shell type sp : straight plug p : right-angled plug r : receptacle number of contacts : contact form p : male contact s : female contact contact termination method : c : crimp contact termination dl : right-angled dip method other speci cations : a two-digit character is added to indicate other speci cations. model name : rp34 series contact type : sc = crimped female contact contact packaging types : 1 : loose piece contacts 2 : reel contacts applicable wire : 1 : for 18 to 22 awg 2 : for 24 to 28 awg identi cation of plating : 2 : silver plating product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. connector crimp contact rp34 - 8sp - 3 s c (71) rp34 - sc - 212 2 rp34 series small plastic connectors for ac adapters (this figure is a representative example.) (this gure is a representative example.) part no. hrs no. rp34-8p-3sc(71) 113-5041-0 71 note : cable clamping force, cable rotation force, and other aspects may differ depending on the cable construction. we recommend that you verify the suitability of the cable assembly before use or production. part no. hrs no. no. of contacts a remarks rp34-8sp-3sc(71) 113-5049-1 71 3 9.6 ???? rp34-8sp-3scd(71) 113-5061-7 71 mating key dependent type rp34-8sp-4sc(71) 113-5097-4 71 4 11 ???? note : cable clamping force, cable rotation force, and other aspects may differ depending on the cable construction. we reccomend that you verify the suitability of the cable assembly before use or production. right-angled plug straight plug rp34-8p-3sc(71) rp34-8sp-3sc(71) 32 1 ?4.4 2 10 10 18 25 7.5 18 3 2 1 ?4.4 a 10 7.5 37.5 30.5 3 rp34 series small plastic connectors for ac adapters (this figure is a representative example.) part no. hrs no. no. of contacts a b remarks rp34-8r-3pdl 113-5042-2 31011 ???? rp34-8r-3pdld 113-5066-0 mating key dependent type rp34-8r-4pdl 113-5098-7 4 11 12 ???? 3 position positioning hole (1 location) 1.9 1.9 2.75 7.4 4.75 4.75 2.1 10.5 3-?1.1 +0.1 0 +0.1 0 +0.1 0 4-?1.7 ?1.5 21 4 3 positioning hole (1 location) 4 position 5.25 5.25 4.25 5.9 0.8 0.8 2.4 2.4 2.1 10.5 ?1.5 +0.1 0 +0.1 0 +0.1 0 4-?1.7 4-?1.1 dip post arrangement for pcb layout remarks 1. the applicable pcb thickness is between 0.8 and 1.6mm. 2. a machining tolerance of ?.05 is recommended for the pcb layout. 3. the above gure shows the pcb side of the rack into which contact dip posts will be inserted. " " mark indicates the plug interface mating side. receptacle rp34-8r-3pdl part no. hrs no. b c applicable wire size remarks rp34-sc-212 113-5043-5 1.6 2.1 18 to 22 awg reel contacts rp34-sc-112 113-5076-4 1.6 2.1 18 to 22 awg loose piece contacts rp34-sc-222 113-5100-7 1.2 1.35 24 to 28 awg reel contacts rp34-sc-122 113-5102-2 1.2 1.35 24 to 28 awg loose piece contacts note : loose piece contacts are packaged 100 pcs/pack and reel contacts are available on 10,000 piece reel. please order in full quantity packs or reels. contact (female contact) a_a a a b 8.7 1.48 c 3 2 1 11.3 a 10 3 b 4 rp34 series small plastic connectors for ac adapters type items part no. hrs no. applicable contact applicable wire size machine crimping automatic crimping press cm-105c 901-0001-0 ???? ???? applicator ap105-rp34-1 901-2025-2 rp34-sc-212 18 to 22 awg ap105-rp34-2 901-2034-3 rp34-sc-222 24 to 28 awg cable crimping tool rp34-tc-01 150-0074-1 ???? ???? extraction tool rp34-sc-tp 150-0072-6 ???? ???? cable bushing metal fitting for clamping cord tube (a) or (b) s-insulation p case 2mm or more 20 2 +0.5 0 1.3 cover cord tube s-insulation p case cable crimping tool (rp34-tc-01) (the handle shape shown above is a representative example.) automatic crimping press (type cm-105c) termination procedure applicable tools straight plug rightangle plug operation procedure ? straight plug 1. first, pass the prepared cable through the bushing, and then crimp and terminate the contacts. 2. assemble the crimped and terminated contacts i nto the contact holes of the s-insulation p case. at this time, please make sure that the crimped contacts are securely engaged onto the contact holes of the s-insulation p case by lightly pulling on the cable. 3. crimp and x the metal tting for clamping with the applicable tool (rp34-tc-01). 4. assemble the s-insulation p case, metal tting for clamping, and bushing onto the cord tube (a). the s-insulation p case can be assembled in two ways, at 180?opposing angles. please make sure to select the orientation that is suitable for your purpose. 5. finally, assemble the remaining cord tube (b). the assembly has been completed. operation procedure ? right-angled plug 1. the right-angled plugs can be assembled in the same manner as the straight plugs, and the s-insulation p case can be assembled to the cord tube in one of two positions. 180?opposite each other. please make sure to select the orientation that is suitable for your purpose. 5 rp34 series small plastic connectors for ac adapters type rp34l product specifications ratings rated current 5a (when using 18 awg) operating temperature range ?25 ? to +85 ? rated voltage ac30v, dc42v storage temperature range ?10 ? to +60 ? items speci? cations conditions 1. contact resistance 30m? max. measured at dc 1a 2. insulation resistance 1,000m? min. measured at dc 100v 3. withstanding voltage no ? ashover or dielectric breakdown. ac 150v for 1 minute 4. vibration proof no electrical discontinuity 10s or longer. 10 to 55hz, half amplitude : 0.75mm, 3 axis directions, 2 hours each 5. temperature cycle insulation resistance : 100m? min -55? : 30 minutes ? normal temperature : 10 to 15 minutes ? +85? : 30 minutes ? normal temperature : 10 to 15 minutes, 5 cycles 6. corrosion resistance no corrosion that affects performance. left in 5% salt water solution for 48 hours 7. mating cycles contact resistance : 60m? max 5,000 times materials / finish items material finish remarks receptacle ? (2position) metal ? tting phosphor bronze solder plating ???? insulator polyamide resin black ul94hb contact brass palladium plating ???? plug ? (2 position) exterior vinyl chloride resin black ul94v-0 insulator polyamide resin ul94hb contact phosphor bronze silver plating ???? receptacle ? (3 position) metal ? tting phosphor bronze solder plating ???? insulator pps resin black ul94v-0 contact brass palladium plating ???? plug ? (3 position) exterior polycarbonate resin black ul94v-0 vinyl chloride resin insulator pps resin contact phosphor bronze palladium plating ???? product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. rp34l - 5pa - 2sc (****) series name : rp34l shell : indicates the shell form. type receptacle : r straight plug : pa right-angled plug : lp number of contacts : shows the number. 2 or 3 contacts. contact type pd : male contact (dip) sc : female contact (crimped) cable length : ( ****) may vary depending on the cable. 6 rp34l series small plastic connectors for ac adapters part no. hrs no. rp34l-5r-2pd(71) 113-5154-6 71 rp34l-5r-3pd(71) 113-5157-4 71 receptacle 3 position 7 9.1 5 2.5 rp34l-5r-2pd(71) rp34l-5r-3pd(71) (1.2) 1.3 0 -0.1 2.120.05 recommended panel opening dimensions (reference) pcb panel plug 7.4 +0.1 0 +0.1 0 3.9 (mating interface side) 4.30.05 4.30.05 3 40.05 4.50.05 1.150.05 2.350.05 2.350.05 2 ? ?1.5 +0.1 0 4 ? ?1.1 +0.1 0 pcb layout mounting dimensions 7.4 2.5 6.1 7 1.3 -0.1 0 recommended panel opening dimensions (reference) panel 7.5 +0.1 0 6.2 +0.1 0 (1.2) pcb (mating interface side) 3 40.05 0.20.05 1.350.05 1.350.05 3.450.05 3.450.05 2? ?1.5 +0.1 0 3? ? 1.1 +0.1 0 pcb layout dimension 2 position 2 position 3 position part no. hrs no. rp34l-5pa-2sc(1857)(71) 113-5153-3 71 rp34l-5pa-3sc(71) 113-5178-4 71 rp34l-5lp-3sc(71) 113-5161-1 71 plug rp34l-5pa-2sc(1857)(71) 1857 4.8 22.4 1800 21.5 7.6 board-in crimping contact bushing 7 9.7 6.1 7.8 ?3.5 a a_a 6 r3 single-contact shielded cable (center conductor wires: 18 awg, shielded cable: 18awg or equivalent) ?9 6 1.5 5.5 a 2.5 rp34l-5pa-3sc(71) 3.7 (external shell) 7.2 10.45 4.8 6.2 23.1 29.7 7.8 ?4.4 rp34l-5lp-3sc(71) 11.4 17.6 11 11.625 2.65 7.2 10.9 11.85 7.8 3.7 ?4.4 4.8 6.2 5.925 7 rp34l series small plastic connectors for ac adapters crimp contact rp34l-sc1-212(01) 0.3 12.7 2.2 1.6 a a section a_a part no. hrs no. rp34l-sc1-212(01) 113-5151-8 01 applicable tools type part no. hrs no. applicable contact applicable cables manual crimping tools ht-102/rp34l-sc1-212 150-0210-8 rp34l-sc1-112(01) 18 to 22 awg machine crimping automatic crimping press cm-105c 901-0001-0 -------------- -------------- applicator ap105-rp34l-sc1-212 901-2043-4 rp34l-sc1-212(01) 18 to 22 awg cable crimping tool rp34-tc-01 150-0074-1 -------------- 4 extraction tool rp6-sc-tp 150-0039-0 -------------- -------------- assembly procedure (3 position plug) straight plug s-insulation p case 5.3 (mating section) (round hole) 8 2 +0.5 0 2 1 cord tube (b) cord tube (a) bushing metal fitting for clamping cable cord tube (b) cord tube (a) (tab) right angle 11 2 s-insulation p case metal fitting for clamping 2 1 cord tube bushing metal fitting for clamping s-insulation p case cable 13.7 2 +0.5 0 1. first pass the prepared cable through the bushing, and then crimp and terminate the contacts. 2. assemble the crimped and terminated contacts into the contact holes of the s-insulation p case. at this time, please make sure that the crimped contacts are securely engaged onto the contact holes of the s-insulation p case by lightly pulling the cable. if you nd an erroneous wiring, insert the extractor (rp6-sc-tp) from the mating side to pull out the contact from the termination side, and then re- assemble. 3. crimp the metal tting for clamping with the applicable tool (rp34- tc-01). 4. align and assemble the protrusion of the s-insulation p case to the round hole of the cord tube (b). 5. attach the mating section of the metal fitting for clamping to the recess of the cord tube (b), and then assemble the bushing and metal tting for clamping onto the cord tube (b). 6. assemble the cord tube (a) onto the cord tube (b). at this time, please make sure that the four tabs of the cord tube (b) rest on the angled hole of the cord tube (a). 1. right-angled plugs can be assembled in the same manner as the straight plugs. 8 rp34l series small plastic connectors for ac adapters precautions 1. to prevent damage to the connector after mounting, make sure that it is supported with a panel or another substrate. this will prevent any type of excessive load or force on the connector. for 2 position type, please support the external shell of th e receptacle. for 3 position type, please support the external shell of the plug. y see page 3 for details on recommended panel dimensions. 2. when mated together, do not apply a load of 30 n or more on the cable in the direction indicated by the arrows. please note that an excessive tensile stress may break the connectors. (external shell) panel plug receptacle receptacle panel <2 position type> <3 position type> 3. this product series uses silver plated contacts. silver reacts easily to exposure to sulfur gas so the below conditions may cause tarnishing. y~ dusty environments y~ area with a high concentration area of gases such as sulfur dioxide gas, hydrogen sulfide gas, nitrogen dioxide gas and so on. example; in close proximity to factory exhaust, automotive emissions, etc. y~ close to heaters, or in other areas marked by extreme temperature differences or high humidity. y~ close to rubber products includes rubber adhesives. the electrical connection is not affected by tarnishing on a silver surface due to the wiping effect of the contact pins. storage packing state; packed in original packing or equivalent container temperature -10 to +60? humidity 85% max (it is recommended that the product be stored in an area of normal level of temperature and humidity, and free of any temperature fluctuation) please use this products within 6 months of delivery. (after 6 month, please check the solderbility before use) ?torage?means long-term storage of the unused products in sealed packaging, prior to assembly to pcb. 9 rp34l series small plastic connectors for ac adapters memo : 10 rp34 series small plastic connectors for ac adapters memo : 11 rp34 series small plastic connectors for ac adapters 12 rp34 series small plastic connectors for ac adapters the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 07/2018. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? usa: hirose electric (u.s.a.), inc. san jose office 2841 junction ave, suite 200 san jose, ca. 95134 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. detroit office (automotive) 17197 n. laurel park drive, suite 253, livonia, mi 48152 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. boston office 300 brickstone square suite 201, andover, ma 01810 phone : +1-978-662-5255 usa: hirose electric (u.s.a.), inc. headquarters chicago office 2300 warrenville road, suite 150, downers grove, il 60515 phone : +1-630-282-6700 http://www.hirose.com/us/ china: hirose electric (china) co., ltd. shenzhen branch room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose.com/cn/ korea: hirose korea co.,ltd. 143, gongdan 1-daero, siheung-si, gyeonggi-do, 15084, korea phone : +82-31-496-7000 fax : +82-31-496-7100 http://www.hirose.co.kr/ germany: hirose electric europe b.v. nuremberg office neumeyerstrasse 22-26, 90411 nurnberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ germany: hirose electric europe b.v. hanover office bayernstr. 3, haus c 30855 langenhagen, germany phone : +49-511 97 82 61 30 fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ germany: hirose electric europe b.v. german branch schoenbergstr. 20, 73760 ostfildern phone : +49-711-456002-1 fax : +49-711-456002-299 http://www.hirose.com/eu/ france: hirose electric europe b.v. paris office 130 avenue joseph kessel, bat e, 78960 voisins le bretonneux, france phone : +33-1-85764886 fax : +33-1-85764823 http://www.hirose.com/eu/ the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hirose.com/eu/ united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 http://www.hirose.com/eu/ china: hirose electric (china) co., ltd. (shanghai, headquarters) 18, enterprise center tower 2, 209# gong he road, jing?an district, shanghai, china 200070 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose.com/cn/ china: hirose electric (china) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose.com/cn/ taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7355 http://www.hirose.com/tw/ hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose.com/hk/ india: hirose electric singapore pte. ltd. delhi liaison office office no.552, regus-green bo ulevard, level5, tower c, sec62, plot b-9a, block b, noida, 201301, uttar pradesh, india phone : +91-12-660-8018 fax : +91-120-4804949 http://www.hirose.com/sg/ singapore: hirose electric singapore pte. ltd. 03, anson road, #20-01, springleaf tower, singapore 079909 phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose.com/sg/ india: hirose electric singapore pte. ltd. bangalore liaison office unit no-403, 4th floor, no-84, barton centre, mahatma gandhi (mg) road, bangalore 560 001, karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose.com/sg/ malaysia: penang representative office 73-3-1, ideal@the one, jalan mahsuri, bayan lepas penang, 11950, malaysia phone : +604-648-5536 http://www.hirose.com/sg/ thailand: bangkok office (representative office) unit 4703, 47th fl., 1 empire tower, south sathorn road, yannawa, sathorn, bangkok 10120 thailand phone : +66-2-686-1255 fax : +66-2-686-3433 http://www.hirose.com/sg/
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. 2018.7 w small i/o connectors for ac adapters rp34 series features 1. superior mating operability a snap-and-lock style allows easy mating/ unmating. 2. cable direction is variable the three-position, right-angled plug makes it possible to arrange the cable to the left or right, offering flexible wiring options depending on your requirement. 3. sequential contact mating designed with sequential contact mating, one pin makes contact with its counterpart sooner than the others and establishes a securely grounded connection. 4. easy plug assembly a snap-together case eliminates the need for screws to fasten the case and helps provide for a quick plug assembly. 5. variations items number of contacts 3 or, 4 connector type plug : straight, right angle receptacle : right angle plug termination version crimp receptacle termination version pcb dip receptacle mounting method pcb dip product speci cations ratings rated current 3a operating temperature range -10 to +60 ? rated voltage ac30v , dc42v storage temperature range -10 to +60 ? items speci cations conditions 1. contact resistance 30m?max measured at dc 1a 2. insulation resistance 1,000m?min measured at dc 100v 3. withstanding voltage no ashover or dielectric breakdown. ac 150v for 1 minute 4. vibration resistance no electrical discontinuity for 10? or longer. 10 to 55hz/cycle, amplitude : 0.75mm, 3 axis directions, 2 hours each 5. shock resistance no electrical discontinuity for 10? or longer. acceleration : 490m/s 2 , duration : 11ms, 3 axis directions, 3 cycles each 6. mating cycles contact resistance : 60m?max. 1,000 times 7. temperature cycle insulation resistance : 100m?min. -55? : 30 minutes ? normal temperature : 10 to 15 minutes ? 85? : 30 minutes ? normal temperature : 10 to 15 minutes, left for 5 cycles 8. moisture resistance insulation resistance: 10m?min (at high humidities). 100m?min (when dry). temperature : 40?, relative humidity : 90 to 95%, left for 96 hours materials / finish items material finish remarks plug exterior, insulator polycarbonate resin ???? ul94v-0 clamp brass ???? ???? bushing vinyl chloride resin ???? ???? receptacle exterior, insulator pbt resin ???? ul94v-0 steel tin plating ???? male contact brass silver plating ???? crimped female contact female contact phosphor bronze silver plating ???? 1 in cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information. model name : rp34 series shell size : the shell size is the outer diameter of the mating end of the plug. shell type sp : straight plug p : right-angled plug r : receptacle number of contacts : contact form p : male contact s : female contact contact termination method : c : crimp contact termination dl : right-angled dip method other speci cations : a two-digit character is added to indicate other speci cations. model name : rp34 series contact type : sc = crimped female contact contact packaging types : 1 : loose piece contacts 2 : reel contacts applicable wire : 1 : for 18 to 22 awg 2 : for 24 to 28 awg identi cation of plating : 2 : silver plating product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. connector crimp contact rp34 - 8sp - 3 s c (71) rp34 - sc - 212 2 rp34 series small plastic connectors for ac adapters (this figure is a representative example.) (this gure is a representative example.) part no. hrs no. rp34-8p-3sc(71) 113-5041-0 71 note : cable clamping force, cable rotation force, and other aspects may differ depending on the cable construction. we recommend that you verify the suitability of the cable assembly before use or production. part no. hrs no. no. of contacts a remarks rp34-8sp-3sc(71) 113-5049-1 71 3 9.6 ???? rp34-8sp-3scd(71) 113-5061-7 71 mating key dependent type rp34-8sp-4sc(71) 113-5097-4 71 4 11 ???? note : cable clamping force, cable rotation force, and other aspects may differ depending on the cable construction. we reccomend that you verify the suitability of the cable assembly before use or production. right-angled plug straight plug rp34-8p-3sc(71) rp34-8sp-3sc(71) 32 1 ?4.4 2 10 10 18 25 7.5 18 3 2 1 ?4.4 a 10 7.5 37.5 30.5 3 rp34 series small plastic connectors for ac adapters (this figure is a representative example.) part no. hrs no. no. of contacts a b remarks rp34-8r-3pdl 113-5042-2 31011 ???? rp34-8r-3pdld 113-5066-0 mating key dependent type rp34-8r-4pdl 113-5098-7 4 11 12 ???? 3 position positioning hole (1 location) 1.9 1.9 2.75 7.4 4.75 4.75 2.1 10.5 3-?1.1 +0.1 0 +0.1 0 +0.1 0 4-?1.7 ?1.5 21 4 3 positioning hole (1 location) 4 position 5.25 5.25 4.25 5.9 0.8 0.8 2.4 2.4 2.1 10.5 ?1.5 +0.1 0 +0.1 0 +0.1 0 4-?1.7 4-?1.1 dip post arrangement for pcb layout remarks 1. the applicable pcb thickness is between 0.8 and 1.6mm. 2. a machining tolerance of ?.05 is recommended for the pcb layout. 3. the above gure shows the pcb side of the rack into which contact dip posts will be inserted. " " mark indicates the plug interface mating side. receptacle rp34-8r-3pdl part no. hrs no. b c applicable wire size remarks rp34-sc-212 113-5043-5 1.6 2.1 18 to 22 awg reel contacts rp34-sc-112 113-5076-4 1.6 2.1 18 to 22 awg loose piece contacts rp34-sc-222 113-5100-7 1.2 1.35 24 to 28 awg reel contacts rp34-sc-122 113-5102-2 1.2 1.35 24 to 28 awg loose piece contacts note : loose piece contacts are packaged 100 pcs/pack and reel contacts are available on 10,000 piece reel. please order in full quantity packs or reels. contact (female contact) a_a a a b 8.7 1.48 c 3 2 1 11.3 a 10 3 b 4 rp34 series small plastic connectors for ac adapters type items part no. hrs no. applicable contact applicable wire size machine crimping automatic crimping press cm-105c 901-0001-0 ???? ???? applicator ap105-rp34-1 901-2025-2 rp34-sc-212 18 to 22 awg ap105-rp34-2 901-2034-3 rp34-sc-222 24 to 28 awg cable crimping tool rp34-tc-01 150-0074-1 ???? ???? extraction tool rp34-sc-tp 150-0072-6 ???? ???? cable bushing metal fitting for clamping cord tube (a) or (b) s-insulation p case 2mm or more 20 2 +0.5 0 1.3 cover cord tube s-insulation p case cable crimping tool (rp34-tc-01) (the handle shape shown above is a representative example.) automatic crimping press (type cm-105c) termination procedure applicable tools straight plug rightangle plug operation procedure ? straight plug 1. first, pass the prepared cable through the bushing, and then crimp and terminate the contacts. 2. assemble the crimped and terminated contacts i nto the contact holes of the s-insulation p case. at this time, please make sure that the crimped contacts are securely engaged onto the contact holes of the s-insulation p case by lightly pulling on the cable. 3. crimp and x the metal tting for clamping with the applicable tool (rp34-tc-01). 4. assemble the s-insulation p case, metal tting for clamping, and bushing onto the cord tube (a). the s-insulation p case can be assembled in two ways, at 180?opposing angles. please make sure to select the orientation that is suitable for your purpose. 5. finally, assemble the remaining cord tube (b). the assembly has been completed. operation procedure ? right-angled plug 1. the right-angled plugs can be assembled in the same manner as the straight plugs, and the s-insulation p case can be assembled to the cord tube in one of two positions. 180?opposite each other. please make sure to select the orientation that is suitable for your purpose. 5 rp34 series small plastic connectors for ac adapters type rp34l product specifications ratings rated current 5a (when using 18 awg) operating temperature range ?25 ? to +85 ? rated voltage ac30v, dc42v storage temperature range ?10 ? to +60 ? items speci? cations conditions 1. contact resistance 30m? max. measured at dc 1a 2. insulation resistance 1,000m? min. measured at dc 100v 3. withstanding voltage no ? ashover or dielectric breakdown. ac 150v for 1 minute 4. vibration proof no electrical discontinuity 10s or longer. 10 to 55hz, half amplitude : 0.75mm, 3 axis directions, 2 hours each 5. temperature cycle insulation resistance : 100m? min -55? : 30 minutes ? normal temperature : 10 to 15 minutes ? +85? : 30 minutes ? normal temperature : 10 to 15 minutes, 5 cycles 6. corrosion resistance no corrosion that affects performance. left in 5% salt water solution for 48 hours 7. mating cycles contact resistance : 60m? max 5,000 times materials / finish items material finish remarks receptacle ? (2position) metal ? tting phosphor bronze solder plating ???? insulator polyamide resin black ul94hb contact brass palladium plating ???? plug ? (2 position) exterior vinyl chloride resin black ul94v-0 insulator polyamide resin ul94hb contact phosphor bronze silver plating ???? receptacle ? (3 position) metal ? tting phosphor bronze solder plating ???? insulator pps resin black ul94v-0 contact brass palladium plating ???? plug ? (3 position) exterior polycarbonate resin black ul94v-0 vinyl chloride resin insulator pps resin contact phosphor bronze palladium plating ???? product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. rp34l - 5pa - 2sc (****) series name : rp34l shell : indicates the shell form. type receptacle : r straight plug : pa right-angled plug : lp number of contacts : shows the number. 2 or 3 contacts. contact type pd : male contact (dip) sc : female contact (crimped) cable length : ( ****) may vary depending on the cable. 6 rp34l series small plastic connectors for ac adapters part no. hrs no. rp34l-5r-2pd(71) 113-5154-6 71 rp34l-5r-3pd(71) 113-5157-4 71 receptacle 3 position 7 9.1 5 2.5 rp34l-5r-2pd(71) rp34l-5r-3pd(71) (1.2) 1.3 0 -0.1 2.120.05 recommended panel opening dimensions (reference) pcb panel plug 7.4 +0.1 0 +0.1 0 3.9 (mating interface side) 4.30.05 4.30.05 3 40.05 4.50.05 1.150.05 2.350.05 2.350.05 2 ? ?1.5 +0.1 0 4 ? ?1.1 +0.1 0 pcb layout mounting dimensions 7.4 2.5 6.1 7 1.3 -0.1 0 recommended panel opening dimensions (reference) panel 7.5 +0.1 0 6.2 +0.1 0 (1.2) pcb (mating interface side) 3 40.05 0.20.05 1.350.05 1.350.05 3.450.05 3.450.05 2? ?1.5 +0.1 0 3? ? 1.1 +0.1 0 pcb layout dimension 2 position 2 position 3 position part no. hrs no. rp34l-5pa-2sc(1857)(71) 113-5153-3 71 rp34l-5pa-3sc(71) 113-5178-4 71 rp34l-5lp-3sc(71) 113-5161-1 71 plug rp34l-5pa-2sc(1857)(71) 1857 4.8 22.4 1800 21.5 7.6 board-in crimping contact bushing 7 9.7 6.1 7.8 ?3.5 a a_a 6 r3 single-contact shielded cable (center conductor wires: 18 awg, shielded cable: 18awg or equivalent) ?9 6 1.5 5.5 a 2.5 rp34l-5pa-3sc(71) 3.7 (external shell) 7.2 10.45 4.8 6.2 23.1 29.7 7.8 ?4.4 rp34l-5lp-3sc(71) 11.4 17.6 11 11.625 2.65 7.2 10.9 11.85 7.8 3.7 ?4.4 4.8 6.2 5.925 7 rp34l series small plastic connectors for ac adapters crimp contact rp34l-sc1-212(01) 0.3 12.7 2.2 1.6 a a section a_a part no. hrs no. rp34l-sc1-212(01) 113-5151-8 01 applicable tools type part no. hrs no. applicable contact applicable cables manual crimping tools ht-102/rp34l-sc1-212 150-0210-8 rp34l-sc1-112(01) 18 to 22 awg machine crimping automatic crimping press cm-105c 901-0001-0 -------------- -------------- applicator ap105-rp34l-sc1-212 901-2043-4 rp34l-sc1-212(01) 18 to 22 awg cable crimping tool rp34-tc-01 150-0074-1 -------------- 4 extraction tool rp6-sc-tp 150-0039-0 -------------- -------------- assembly procedure (3 position plug) straight plug s-insulation p case 5.3 (mating section) (round hole) 8 2 +0.5 0 2 1 cord tube (b) cord tube (a) bushing metal fitting for clamping cable cord tube (b) cord tube (a) (tab) right angle 11 2 s-insulation p case metal fitting for clamping 2 1 cord tube bushing metal fitting for clamping s-insulation p case cable 13.7 2 +0.5 0 1. first pass the prepared cable through the bushing, and then crimp and terminate the contacts. 2. assemble the crimped and terminated contacts into the contact holes of the s-insulation p case. at this time, please make sure that the crimped contacts are securely engaged onto the contact holes of the s-insulation p case by lightly pulling the cable. if you nd an erroneous wiring, insert the extractor (rp6-sc-tp) from the mating side to pull out the contact from the termination side, and then re- assemble. 3. crimp the metal tting for clamping with the applicable tool (rp34- tc-01). 4. align and assemble the protrusion of the s-insulation p case to the round hole of the cord tube (b). 5. attach the mating section of the metal fitting for clamping to the recess of the cord tube (b), and then assemble the bushing and metal tting for clamping onto the cord tube (b). 6. assemble the cord tube (a) onto the cord tube (b). at this time, please make sure that the four tabs of the cord tube (b) rest on the angled hole of the cord tube (a). 1. right-angled plugs can be assembled in the same manner as the straight plugs. 8 rp34l series small plastic connectors for ac adapters precautions 1. to prevent damage to the connector after mounting, make sure that it is supported with a panel or another substrate. this will prevent any type of excessive load or force on the connector. for 2 position type, please support the external shell of th e receptacle. for 3 position type, please support the external shell of the plug. y see page 3 for details on recommended panel dimensions. 2. when mated together, do not apply a load of 30 n or more on the cable in the direction indicated by the arrows. please note that an excessive tensile stress may break the connectors. (external shell) panel plug receptacle receptacle panel <2 position type> <3 position type> 3. this product series uses silver plated contacts. silver reacts easily to exposure to sulfur gas so the below conditions may cause tarnishing. y~ dusty environments y~ area with a high concentration area of gases such as sulfur dioxide gas, hydrogen sulfide gas, nitrogen dioxide gas and so on. example; in close proximity to factory exhaust, automotive emissions, etc. y~ close to heaters, or in other areas marked by extreme temperature differences or high humidity. y~ close to rubber products includes rubber adhesives. the electrical connection is not affected by tarnishing on a silver surface due to the wiping effect of the contact pins. storage packing state; packed in original packing or equivalent container temperature -10 to +60? humidity 85% max (it is recommended that the product be stored in an area of normal level of temperature and humidity, and free of any temperature fluctuation) please use this products within 6 months of delivery. (after 6 month, please check the solderbility before use) ?torage?means long-term storage of the unused products in sealed packaging, prior to assembly to pcb. 9 rp34l series small plastic connectors for ac adapters memo : 10 rp34 series small plastic connectors for ac adapters memo : 11 rp34 series small plastic connectors for ac adapters 12 rp34 series small plastic connectors for ac adapters the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 07/2018. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? usa: hirose electric (u.s.a.), inc. san jose office 2841 junction ave, suite 200 san jose, ca. 95134 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. detroit office (automotive) 17197 n. laurel park drive, suite 253, livonia, mi 48152 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. boston office 300 brickstone square suite 201, andover, ma 01810 phone : +1-978-662-5255 usa: hirose electric (u.s.a.), inc. headquarters chicago office 2300 warrenville road, suite 150, downers grove, il 60515 phone : +1-630-282-6700 http://www.hirose.com/us/ china: hirose electric (china) co., ltd. shenzhen branch room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose.com/cn/ korea: hirose korea co.,ltd. 143, gongdan 1-daero, siheung-si, gyeonggi-do, 15084, korea phone : +82-31-496-7000 fax : +82-31-496-7100 http://www.hirose.co.kr/ germany: hirose electric europe b.v. nuremberg office neumeyerstrasse 22-26, 90411 nurnberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ germany: hirose electric europe b.v. hanover office bayernstr. 3, haus c 30855 langenhagen, germany phone : +49-511 97 82 61 30 fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ germany: hirose electric europe b.v. german branch schoenbergstr. 20, 73760 ostfildern phone : +49-711-456002-1 fax : +49-711-456002-299 http://www.hirose.com/eu/ france: hirose electric europe b.v. paris office 130 avenue joseph kessel, bat e, 78960 voisins le bretonneux, france phone : +33-1-85764886 fax : +33-1-85764823 http://www.hirose.com/eu/ the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hirose.com/eu/ united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 http://www.hirose.com/eu/ china: hirose electric (china) co., ltd. (shanghai, headquarters) 18, enterprise center tower 2, 209# gong he road, jing?an district, shanghai, china 200070 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose.com/cn/ china: hirose electric (china) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose.com/cn/ taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7355 http://www.hirose.com/tw/ hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose.com/hk/ india: hirose electric singapore pte. ltd. delhi liaison office office no.552, regus-green bo ulevard, level5, tower c, sec62, plot b-9a, block b, noida, 201301, uttar pradesh, india phone : +91-12-660-8018 fax : +91-120-4804949 http://www.hirose.com/sg/ singapore: hirose electric singapore pte. ltd. 03, anson road, #20-01, springleaf tower, singapore 079909 phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose.com/sg/ india: hirose electric singapore pte. ltd. bangalore liaison office unit no-403, 4th floor, no-84, barton centre, mahatma gandhi (mg) road, bangalore 560 001, karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose.com/sg/ malaysia: penang representative office 73-3-1, ideal@the one, jalan mahsuri, bayan lepas penang, 11950, malaysia phone : +604-648-5536 http://www.hirose.com/sg/ thailand: bangkok office (representative office) unit 4703, 47th fl., 1 empire tower, south sathorn road, yannawa, sathorn, bangkok 10120 thailand phone : +66-2-686-1255 fax : +66-2-686-3433 http://www.hirose.com/sg/
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. 2018.7 w small i/o connectors for ac adapters rp34 series features 1. superior mating operability a snap-and-lock style allows easy mating/ unmating. 2. cable direction is variable the three-position, right-angled plug makes it possible to arrange the cable to the left or right, offering flexible wiring options depending on your requirement. 3. sequential contact mating designed with sequential contact mating, one pin makes contact with its counterpart sooner than the others and establishes a securely grounded connection. 4. easy plug assembly a snap-together case eliminates the need for screws to fasten the case and helps provide for a quick plug assembly. 5. variations items number of contacts 3 or, 4 connector type plug : straight, right angle receptacle : right angle plug termination version crimp receptacle termination version pcb dip receptacle mounting method pcb dip product speci cations ratings rated current 3a operating temperature range -10 to +60 ? rated voltage ac30v , dc42v storage temperature range -10 to +60 ? items speci cations conditions 1. contact resistance 30m?max measured at dc 1a 2. insulation resistance 1,000m?min measured at dc 100v 3. withstanding voltage no ashover or dielectric breakdown. ac 150v for 1 minute 4. vibration resistance no electrical discontinuity for 10? or longer. 10 to 55hz/cycle, amplitude : 0.75mm, 3 axis directions, 2 hours each 5. shock resistance no electrical discontinuity for 10? or longer. acceleration : 490m/s 2 , duration : 11ms, 3 axis directions, 3 cycles each 6. mating cycles contact resistance : 60m?max. 1,000 times 7. temperature cycle insulation resistance : 100m?min. -55? : 30 minutes ? normal temperature : 10 to 15 minutes ? 85? : 30 minutes ? normal temperature : 10 to 15 minutes, left for 5 cycles 8. moisture resistance insulation resistance: 10m?min (at high humidities). 100m?min (when dry). temperature : 40?, relative humidity : 90 to 95%, left for 96 hours materials / finish items material finish remarks plug exterior, insulator polycarbonate resin ???? ul94v-0 clamp brass ???? ???? bushing vinyl chloride resin ???? ???? receptacle exterior, insulator pbt resin ???? ul94v-0 steel tin plating ???? male contact brass silver plating ???? crimped female contact female contact phosphor bronze silver plating ???? 1 in cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information. model name : rp34 series shell size : the shell size is the outer diameter of the mating end of the plug. shell type sp : straight plug p : right-angled plug r : receptacle number of contacts : contact form p : male contact s : female contact contact termination method : c : crimp contact termination dl : right-angled dip method other speci cations : a two-digit character is added to indicate other speci cations. model name : rp34 series contact type : sc = crimped female contact contact packaging types : 1 : loose piece contacts 2 : reel contacts applicable wire : 1 : for 18 to 22 awg 2 : for 24 to 28 awg identi cation of plating : 2 : silver plating product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. connector crimp contact rp34 - 8sp - 3 s c (71) rp34 - sc - 212 2 rp34 series small plastic connectors for ac adapters (this figure is a representative example.) (this gure is a representative example.) part no. hrs no. rp34-8p-3sc(71) 113-5041-0 71 note : cable clamping force, cable rotation force, and other aspects may differ depending on the cable construction. we recommend that you verify the suitability of the cable assembly before use or production. part no. hrs no. no. of contacts a remarks rp34-8sp-3sc(71) 113-5049-1 71 3 9.6 ???? rp34-8sp-3scd(71) 113-5061-7 71 mating key dependent type rp34-8sp-4sc(71) 113-5097-4 71 4 11 ???? note : cable clamping force, cable rotation force, and other aspects may differ depending on the cable construction. we reccomend that you verify the suitability of the cable assembly before use or production. right-angled plug straight plug rp34-8p-3sc(71) rp34-8sp-3sc(71) 32 1 ?4.4 2 10 10 18 25 7.5 18 3 2 1 ?4.4 a 10 7.5 37.5 30.5 3 rp34 series small plastic connectors for ac adapters (this figure is a representative example.) part no. hrs no. no. of contacts a b remarks rp34-8r-3pdl 113-5042-2 31011 ???? rp34-8r-3pdld 113-5066-0 mating key dependent type rp34-8r-4pdl 113-5098-7 4 11 12 ???? 3 position positioning hole (1 location) 1.9 1.9 2.75 7.4 4.75 4.75 2.1 10.5 3-?1.1 +0.1 0 +0.1 0 +0.1 0 4-?1.7 ?1.5 21 4 3 positioning hole (1 location) 4 position 5.25 5.25 4.25 5.9 0.8 0.8 2.4 2.4 2.1 10.5 ?1.5 +0.1 0 +0.1 0 +0.1 0 4-?1.7 4-?1.1 dip post arrangement for pcb layout remarks 1. the applicable pcb thickness is between 0.8 and 1.6mm. 2. a machining tolerance of ?.05 is recommended for the pcb layout. 3. the above gure shows the pcb side of the rack into which contact dip posts will be inserted. " " mark indicates the plug interface mating side. receptacle rp34-8r-3pdl part no. hrs no. b c applicable wire size remarks rp34-sc-212 113-5043-5 1.6 2.1 18 to 22 awg reel contacts rp34-sc-112 113-5076-4 1.6 2.1 18 to 22 awg loose piece contacts rp34-sc-222 113-5100-7 1.2 1.35 24 to 28 awg reel contacts rp34-sc-122 113-5102-2 1.2 1.35 24 to 28 awg loose piece contacts note : loose piece contacts are packaged 100 pcs/pack and reel contacts are available on 10,000 piece reel. please order in full quantity packs or reels. contact (female contact) a_a a a b 8.7 1.48 c 3 2 1 11.3 a 10 3 b 4 rp34 series small plastic connectors for ac adapters type items part no. hrs no. applicable contact applicable wire size machine crimping automatic crimping press cm-105c 901-0001-0 ???? ???? applicator ap105-rp34-1 901-2025-2 rp34-sc-212 18 to 22 awg ap105-rp34-2 901-2034-3 rp34-sc-222 24 to 28 awg cable crimping tool rp34-tc-01 150-0074-1 ???? ???? extraction tool rp34-sc-tp 150-0072-6 ???? ???? cable bushing metal fitting for clamping cord tube (a) or (b) s-insulation p case 2mm or more 20 2 +0.5 0 1.3 cover cord tube s-insulation p case cable crimping tool (rp34-tc-01) (the handle shape shown above is a representative example.) automatic crimping press (type cm-105c) termination procedure applicable tools straight plug rightangle plug operation procedure ? straight plug 1. first, pass the prepared cable through the bushing, and then crimp and terminate the contacts. 2. assemble the crimped and terminated contacts i nto the contact holes of the s-insulation p case. at this time, please make sure that the crimped contacts are securely engaged onto the contact holes of the s-insulation p case by lightly pulling on the cable. 3. crimp and x the metal tting for clamping with the applicable tool (rp34-tc-01). 4. assemble the s-insulation p case, metal tting for clamping, and bushing onto the cord tube (a). the s-insulation p case can be assembled in two ways, at 180?opposing angles. please make sure to select the orientation that is suitable for your purpose. 5. finally, assemble the remaining cord tube (b). the assembly has been completed. operation procedure ? right-angled plug 1. the right-angled plugs can be assembled in the same manner as the straight plugs, and the s-insulation p case can be assembled to the cord tube in one of two positions. 180?opposite each other. please make sure to select the orientation that is suitable for your purpose. 5 rp34 series small plastic connectors for ac adapters type rp34l product specifications ratings rated current 5a (when using 18 awg) operating temperature range ?25 ? to +85 ? rated voltage ac30v, dc42v storage temperature range ?10 ? to +60 ? items speci? cations conditions 1. contact resistance 30m? max. measured at dc 1a 2. insulation resistance 1,000m? min. measured at dc 100v 3. withstanding voltage no ? ashover or dielectric breakdown. ac 150v for 1 minute 4. vibration proof no electrical discontinuity 10s or longer. 10 to 55hz, half amplitude : 0.75mm, 3 axis directions, 2 hours each 5. temperature cycle insulation resistance : 100m? min -55? : 30 minutes ? normal temperature : 10 to 15 minutes ? +85? : 30 minutes ? normal temperature : 10 to 15 minutes, 5 cycles 6. corrosion resistance no corrosion that affects performance. left in 5% salt water solution for 48 hours 7. mating cycles contact resistance : 60m? max 5,000 times materials / finish items material finish remarks receptacle ? (2position) metal ? tting phosphor bronze solder plating ???? insulator polyamide resin black ul94hb contact brass palladium plating ???? plug ? (2 position) exterior vinyl chloride resin black ul94v-0 insulator polyamide resin ul94hb contact phosphor bronze silver plating ???? receptacle ? (3 position) metal ? tting phosphor bronze solder plating ???? insulator pps resin black ul94v-0 contact brass palladium plating ???? plug ? (3 position) exterior polycarbonate resin black ul94v-0 vinyl chloride resin insulator pps resin contact phosphor bronze palladium plating ???? product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. rp34l - 5pa - 2sc (****) series name : rp34l shell : indicates the shell form. type receptacle : r straight plug : pa right-angled plug : lp number of contacts : shows the number. 2 or 3 contacts. contact type pd : male contact (dip) sc : female contact (crimped) cable length : ( ****) may vary depending on the cable. 6 rp34l series small plastic connectors for ac adapters part no. hrs no. rp34l-5r-2pd(71) 113-5154-6 71 rp34l-5r-3pd(71) 113-5157-4 71 receptacle 3 position 7 9.1 5 2.5 rp34l-5r-2pd(71) rp34l-5r-3pd(71) (1.2) 1.3 0 -0.1 2.120.05 recommended panel opening dimensions (reference) pcb panel plug 7.4 +0.1 0 +0.1 0 3.9 (mating interface side) 4.30.05 4.30.05 3 40.05 4.50.05 1.150.05 2.350.05 2.350.05 2 ? ?1.5 +0.1 0 4 ? ?1.1 +0.1 0 pcb layout mounting dimensions 7.4 2.5 6.1 7 1.3 -0.1 0 recommended panel opening dimensions (reference) panel 7.5 +0.1 0 6.2 +0.1 0 (1.2) pcb (mating interface side) 3 40.05 0.20.05 1.350.05 1.350.05 3.450.05 3.450.05 2? ?1.5 +0.1 0 3? ? 1.1 +0.1 0 pcb layout dimension 2 position 2 position 3 position part no. hrs no. rp34l-5pa-2sc(1857)(71) 113-5153-3 71 rp34l-5pa-3sc(71) 113-5178-4 71 rp34l-5lp-3sc(71) 113-5161-1 71 plug rp34l-5pa-2sc(1857)(71) 1857 4.8 22.4 1800 21.5 7.6 board-in crimping contact bushing 7 9.7 6.1 7.8 ?3.5 a a_a 6 r3 single-contact shielded cable (center conductor wires: 18 awg, shielded cable: 18awg or equivalent) ?9 6 1.5 5.5 a 2.5 rp34l-5pa-3sc(71) 3.7 (external shell) 7.2 10.45 4.8 6.2 23.1 29.7 7.8 ?4.4 rp34l-5lp-3sc(71) 11.4 17.6 11 11.625 2.65 7.2 10.9 11.85 7.8 3.7 ?4.4 4.8 6.2 5.925 7 rp34l series small plastic connectors for ac adapters crimp contact rp34l-sc1-212(01) 0.3 12.7 2.2 1.6 a a section a_a part no. hrs no. rp34l-sc1-212(01) 113-5151-8 01 applicable tools type part no. hrs no. applicable contact applicable cables manual crimping tools ht-102/rp34l-sc1-212 150-0210-8 rp34l-sc1-112(01) 18 to 22 awg machine crimping automatic crimping press cm-105c 901-0001-0 -------------- -------------- applicator ap105-rp34l-sc1-212 901-2043-4 rp34l-sc1-212(01) 18 to 22 awg cable crimping tool rp34-tc-01 150-0074-1 -------------- 4 extraction tool rp6-sc-tp 150-0039-0 -------------- -------------- assembly procedure (3 position plug) straight plug s-insulation p case 5.3 (mating section) (round hole) 8 2 +0.5 0 2 1 cord tube (b) cord tube (a) bushing metal fitting for clamping cable cord tube (b) cord tube (a) (tab) right angle 11 2 s-insulation p case metal fitting for clamping 2 1 cord tube bushing metal fitting for clamping s-insulation p case cable 13.7 2 +0.5 0 1. first pass the prepared cable through the bushing, and then crimp and terminate the contacts. 2. assemble the crimped and terminated contacts into the contact holes of the s-insulation p case. at this time, please make sure that the crimped contacts are securely engaged onto the contact holes of the s-insulation p case by lightly pulling the cable. if you nd an erroneous wiring, insert the extractor (rp6-sc-tp) from the mating side to pull out the contact from the termination side, and then re- assemble. 3. crimp the metal tting for clamping with the applicable tool (rp34- tc-01). 4. align and assemble the protrusion of the s-insulation p case to the round hole of the cord tube (b). 5. attach the mating section of the metal fitting for clamping to the recess of the cord tube (b), and then assemble the bushing and metal tting for clamping onto the cord tube (b). 6. assemble the cord tube (a) onto the cord tube (b). at this time, please make sure that the four tabs of the cord tube (b) rest on the angled hole of the cord tube (a). 1. right-angled plugs can be assembled in the same manner as the straight plugs. 8 rp34l series small plastic connectors for ac adapters precautions 1. to prevent damage to the connector after mounting, make sure that it is supported with a panel or another substrate. this will prevent any type of excessive load or force on the connector. for 2 position type, please support the external shell of th e receptacle. for 3 position type, please support the external shell of the plug. y see page 3 for details on recommended panel dimensions. 2. when mated together, do not apply a load of 30 n or more on the cable in the direction indicated by the arrows. please note that an excessive tensile stress may break the connectors. (external shell) panel plug receptacle receptacle panel <2 position type> <3 position type> 3. this product series uses silver plated contacts. silver reacts easily to exposure to sulfur gas so the below conditions may cause tarnishing. y~ dusty environments y~ area with a high concentration area of gases such as sulfur dioxide gas, hydrogen sulfide gas, nitrogen dioxide gas and so on. example; in close proximity to factory exhaust, automotive emissions, etc. y~ close to heaters, or in other areas marked by extreme temperature differences or high humidity. y~ close to rubber products includes rubber adhesives. the electrical connection is not affected by tarnishing on a silver surface due to the wiping effect of the contact pins. storage packing state; packed in original packing or equivalent container temperature -10 to +60? humidity 85% max (it is recommended that the product be stored in an area of normal level of temperature and humidity, and free of any temperature fluctuation) please use this products within 6 months of delivery. (after 6 month, please check the solderbility before use) ?torage?means long-term storage of the unused products in sealed packaging, prior to assembly to pcb. 9 rp34l series small plastic connectors for ac adapters memo : 10 rp34 series small plastic connectors for ac adapters memo : 11 rp34 series small plastic connectors for ac adapters 12 rp34 series small plastic connectors for ac adapters the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 07/2018. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? usa: hirose electric (u.s.a.), inc. san jose office 2841 junction ave, suite 200 san jose, ca. 95134 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. detroit office (automotive) 17197 n. laurel park drive, suite 253, livonia, mi 48152 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. boston office 300 brickstone square suite 201, andover, ma 01810 phone : +1-978-662-5255 usa: hirose electric (u.s.a.), inc. headquarters chicago office 2300 warrenville road, suite 150, downers grove, il 60515 phone : +1-630-282-6700 http://www.hirose.com/us/ china: hirose electric (china) co., ltd. shenzhen branch room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose.com/cn/ korea: hirose korea co.,ltd. 143, gongdan 1-daero, siheung-si, gyeonggi-do, 15084, korea phone : +82-31-496-7000 fax : +82-31-496-7100 http://www.hirose.co.kr/ germany: hirose electric europe b.v. nuremberg office neumeyerstrasse 22-26, 90411 nurnberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ germany: hirose electric europe b.v. hanover office bayernstr. 3, haus c 30855 langenhagen, germany phone : +49-511 97 82 61 30 fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ germany: hirose electric europe b.v. german branch schoenbergstr. 20, 73760 ostfildern phone : +49-711-456002-1 fax : +49-711-456002-299 http://www.hirose.com/eu/ france: hirose electric europe b.v. paris office 130 avenue joseph kessel, bat e, 78960 voisins le bretonneux, france phone : +33-1-85764886 fax : +33-1-85764823 http://www.hirose.com/eu/ the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hirose.com/eu/ united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 http://www.hirose.com/eu/ china: hirose electric (china) co., ltd. (shanghai, headquarters) 18, enterprise center tower 2, 209# gong he road, jing?an district, shanghai, china 200070 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose.com/cn/ china: hirose electric (china) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose.com/cn/ taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7355 http://www.hirose.com/tw/ hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose.com/hk/ india: hirose electric singapore pte. ltd. delhi liaison office office no.552, regus-green bo ulevard, level5, tower c, sec62, plot b-9a, block b, noida, 201301, uttar pradesh, india phone : +91-12-660-8018 fax : +91-120-4804949 http://www.hirose.com/sg/ singapore: hirose electric singapore pte. ltd. 03, anson road, #20-01, springleaf tower, singapore 079909 phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose.com/sg/ india: hirose electric singapore pte. ltd. bangalore liaison office unit no-403, 4th floor, no-84, barton centre, mahatma gandhi (mg) road, bangalore 560 001, karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose.com/sg/ malaysia: penang representative office 73-3-1, ideal@the one, jalan mahsuri, bayan lepas penang, 11950, malaysia phone : +604-648-5536 http://www.hirose.com/sg/ thailand: bangkok office (representative office) unit 4703, 47th fl., 1 empire tower, south sathorn road, yannawa, sathorn, bangkok 10120 thailand phone : +66-2-686-1255 fax : +66-2-686-3433 http://www.hirose.com/sg/
sep.1.2018 copyright 2018 hirose electric co., ltd. all rights reserved. powered by tcpdf (www.tcpdf.org) 2018.7 w small i/o connectors for ac adapters rp34 series features 1. superior mating operability a snap-and-lock style allows easy mating/ unmating. 2. cable direction is variable the three-position, right-angled plug makes it possible to arrange the cable to the left or right, offering flexible wiring options depending on your requirement. 3. sequential contact mating designed with sequential contact mating, one pin makes contact with its counterpart sooner than the others and establishes a securely grounded connection. 4. easy plug assembly a snap-together case eliminates the need for screws to fasten the case and helps provide for a quick plug assembly. 5. variations items number of contacts 3 or, 4 connector type plug : straight, right angle receptacle : right angle plug termination version crimp receptacle termination version pcb dip receptacle mounting method pcb dip product speci cations ratings rated current 3a operating temperature range -10 to +60 ? rated voltage ac30v , dc42v storage temperature range -10 to +60 ? items speci cations conditions 1. contact resistance 30m?max measured at dc 1a 2. insulation resistance 1,000m?min measured at dc 100v 3. withstanding voltage no ashover or dielectric breakdown. ac 150v for 1 minute 4. vibration resistance no electrical discontinuity for 10? or longer. 10 to 55hz/cycle, amplitude : 0.75mm, 3 axis directions, 2 hours each 5. shock resistance no electrical discontinuity for 10? or longer. acceleration : 490m/s 2 , duration : 11ms, 3 axis directions, 3 cycles each 6. mating cycles contact resistance : 60m?max. 1,000 times 7. temperature cycle insulation resistance : 100m?min. -55? : 30 minutes ? normal temperature : 10 to 15 minutes ? 85? : 30 minutes ? normal temperature : 10 to 15 minutes, left for 5 cycles 8. moisture resistance insulation resistance: 10m?min (at high humidities). 100m?min (when dry). temperature : 40?, relative humidity : 90 to 95%, left for 96 hours materials / finish items material finish remarks plug exterior, insulator polycarbonate resin ???? ul94v-0 clamp brass ???? ???? bushing vinyl chloride resin ???? ???? receptacle exterior, insulator pbt resin ???? ul94v-0 steel tin plating ???? male contact brass silver plating ???? crimped female contact female contact phosphor bronze silver plating ???? 1 in cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information. model name : rp34 series shell size : the shell size is the outer diameter of the mating end of the plug. shell type sp : straight plug p : right-angled plug r : receptacle number of contacts : contact form p : male contact s : female contact contact termination method : c : crimp contact termination dl : right-angled dip method other speci cations : a two-digit character is added to indicate other speci cations. model name : rp34 series contact type : sc = crimped female contact contact packaging types : 1 : loose piece contacts 2 : reel contacts applicable wire : 1 : for 18 to 22 awg 2 : for 24 to 28 awg identi cation of plating : 2 : silver plating product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. connector crimp contact rp34 - 8sp - 3 s c (71) rp34 - sc - 212 2 rp34 series small plastic connectors for ac adapters (this figure is a representative example.) (this gure is a representative example.) part no. hrs no. rp34-8p-3sc(71) 113-5041-0 71 note : cable clamping force, cable rotation force, and other aspects may differ depending on the cable construction. we recommend that you verify the suitability of the cable assembly before use or production. part no. hrs no. no. of contacts a remarks rp34-8sp-3sc(71) 113-5049-1 71 3 9.6 ???? rp34-8sp-3scd(71) 113-5061-7 71 mating key dependent type rp34-8sp-4sc(71) 113-5097-4 71 4 11 ???? note : cable clamping force, cable rotation force, and other aspects may differ depending on the cable construction. we reccomend that you verify the suitability of the cable assembly before use or production. right-angled plug straight plug rp34-8p-3sc(71) rp34-8sp-3sc(71) 32 1 ?4.4 2 10 10 18 25 7.5 18 3 2 1 ?4.4 a 10 7.5 37.5 30.5 3 rp34 series small plastic connectors for ac adapters (this figure is a representative example.) part no. hrs no. no. of contacts a b remarks rp34-8r-3pdl 113-5042-2 31011 ???? rp34-8r-3pdld 113-5066-0 mating key dependent type rp34-8r-4pdl 113-5098-7 4 11 12 ???? 3 position positioning hole (1 location) 1.9 1.9 2.75 7.4 4.75 4.75 2.1 10.5 3-?1.1 +0.1 0 +0.1 0 +0.1 0 4-?1.7 ?1.5 21 4 3 positioning hole (1 location) 4 position 5.25 5.25 4.25 5.9 0.8 0.8 2.4 2.4 2.1 10.5 ?1.5 +0.1 0 +0.1 0 +0.1 0 4-?1.7 4-?1.1 dip post arrangement for pcb layout remarks 1. the applicable pcb thickness is between 0.8 and 1.6mm. 2. a machining tolerance of ?.05 is recommended for the pcb layout. 3. the above gure shows the pcb side of the rack into which contact dip posts will be inserted. " " mark indicates the plug interface mating side. receptacle rp34-8r-3pdl part no. hrs no. b c applicable wire size remarks rp34-sc-212 113-5043-5 1.6 2.1 18 to 22 awg reel contacts rp34-sc-112 113-5076-4 1.6 2.1 18 to 22 awg loose piece contacts rp34-sc-222 113-5100-7 1.2 1.35 24 to 28 awg reel contacts rp34-sc-122 113-5102-2 1.2 1.35 24 to 28 awg loose piece contacts note : loose piece contacts are packaged 100 pcs/pack and reel contacts are available on 10,000 piece reel. please order in full quantity packs or reels. contact (female contact) a_a a a b 8.7 1.48 c 3 2 1 11.3 a 10 3 b 4 rp34 series small plastic connectors for ac adapters type items part no. hrs no. applicable contact applicable wire size machine crimping automatic crimping press cm-105c 901-0001-0 ???? ???? applicator ap105-rp34-1 901-2025-2 rp34-sc-212 18 to 22 awg ap105-rp34-2 901-2034-3 rp34-sc-222 24 to 28 awg cable crimping tool rp34-tc-01 150-0074-1 ???? ???? extraction tool rp34-sc-tp 150-0072-6 ???? ???? cable bushing metal fitting for clamping cord tube (a) or (b) s-insulation p case 2mm or more 20 2 +0.5 0 1.3 cover cord tube s-insulation p case cable crimping tool (rp34-tc-01) (the handle shape shown above is a representative example.) automatic crimping press (type cm-105c) termination procedure applicable tools straight plug rightangle plug operation procedure ? straight plug 1. first, pass the prepared cable through the bushing, and then crimp and terminate the contacts. 2. assemble the crimped and terminated contacts i nto the contact holes of the s-insulation p case. at this time, please make sure that the crimped contacts are securely engaged onto the contact holes of the s-insulation p case by lightly pulling on the cable. 3. crimp and x the metal tting for clamping with the applicable tool (rp34-tc-01). 4. assemble the s-insulation p case, metal tting for clamping, and bushing onto the cord tube (a). the s-insulation p case can be assembled in two ways, at 180?opposing angles. please make sure to select the orientation that is suitable for your purpose. 5. finally, assemble the remaining cord tube (b). the assembly has been completed. operation procedure ? right-angled plug 1. the right-angled plugs can be assembled in the same manner as the straight plugs, and the s-insulation p case can be assembled to the cord tube in one of two positions. 180?opposite each other. please make sure to select the orientation that is suitable for your purpose. 5 rp34 series small plastic connectors for ac adapters type rp34l product specifications ratings rated current 5a (when using 18 awg) operating temperature range ?25 ? to +85 ? rated voltage ac30v, dc42v storage temperature range ?10 ? to +60 ? items speci? cations conditions 1. contact resistance 30m? max. measured at dc 1a 2. insulation resistance 1,000m? min. measured at dc 100v 3. withstanding voltage no ? ashover or dielectric breakdown. ac 150v for 1 minute 4. vibration proof no electrical discontinuity 10s or longer. 10 to 55hz, half amplitude : 0.75mm, 3 axis directions, 2 hours each 5. temperature cycle insulation resistance : 100m? min -55? : 30 minutes ? normal temperature : 10 to 15 minutes ? +85? : 30 minutes ? normal temperature : 10 to 15 minutes, 5 cycles 6. corrosion resistance no corrosion that affects performance. left in 5% salt water solution for 48 hours 7. mating cycles contact resistance : 60m? max 5,000 times materials / finish items material finish remarks receptacle ? (2position) metal ? tting phosphor bronze solder plating ???? insulator polyamide resin black ul94hb contact brass palladium plating ???? plug ? (2 position) exterior vinyl chloride resin black ul94v-0 insulator polyamide resin ul94hb contact phosphor bronze silver plating ???? receptacle ? (3 position) metal ? tting phosphor bronze solder plating ???? insulator pps resin black ul94v-0 contact brass palladium plating ???? plug ? (3 position) exterior polycarbonate resin black ul94v-0 vinyl chloride resin insulator pps resin contact phosphor bronze palladium plating ???? product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. rp34l - 5pa - 2sc (****) series name : rp34l shell : indicates the shell form. type receptacle : r straight plug : pa right-angled plug : lp number of contacts : shows the number. 2 or 3 contacts. contact type pd : male contact (dip) sc : female contact (crimped) cable length : ( ****) may vary depending on the cable. 6 rp34l series small plastic connectors for ac adapters part no. hrs no. rp34l-5r-2pd(71) 113-5154-6 71 rp34l-5r-3pd(71) 113-5157-4 71 receptacle 3 position 7 9.1 5 2.5 rp34l-5r-2pd(71) rp34l-5r-3pd(71) (1.2) 1.3 0 -0.1 2.120.05 recommended panel opening dimensions (reference) pcb panel plug 7.4 +0.1 0 +0.1 0 3.9 (mating interface side) 4.30.05 4.30.05 3 40.05 4.50.05 1.150.05 2.350.05 2.350.05 2 ? ?1.5 +0.1 0 4 ? ?1.1 +0.1 0 pcb layout mounting dimensions 7.4 2.5 6.1 7 1.3 -0.1 0 recommended panel opening dimensions (reference) panel 7.5 +0.1 0 6.2 +0.1 0 (1.2) pcb (mating interface side) 3 40.05 0.20.05 1.350.05 1.350.05 3.450.05 3.450.05 2? ?1.5 +0.1 0 3? ? 1.1 +0.1 0 pcb layout dimension 2 position 2 position 3 position part no. hrs no. rp34l-5pa-2sc(1857)(71) 113-5153-3 71 rp34l-5pa-3sc(71) 113-5178-4 71 rp34l-5lp-3sc(71) 113-5161-1 71 plug rp34l-5pa-2sc(1857)(71) 1857 4.8 22.4 1800 21.5 7.6 board-in crimping contact bushing 7 9.7 6.1 7.8 ?3.5 a a_a 6 r3 single-contact shielded cable (center conductor wires: 18 awg, shielded cable: 18awg or equivalent) ?9 6 1.5 5.5 a 2.5 rp34l-5pa-3sc(71) 3.7 (external shell) 7.2 10.45 4.8 6.2 23.1 29.7 7.8 ?4.4 rp34l-5lp-3sc(71) 11.4 17.6 11 11.625 2.65 7.2 10.9 11.85 7.8 3.7 ?4.4 4.8 6.2 5.925 7 rp34l series small plastic connectors for ac adapters crimp contact rp34l-sc1-212(01) 0.3 12.7 2.2 1.6 a a section a_a part no. hrs no. rp34l-sc1-212(01) 113-5151-8 01 applicable tools type part no. hrs no. applicable contact applicable cables manual crimping tools ht-102/rp34l-sc1-212 150-0210-8 rp34l-sc1-112(01) 18 to 22 awg machine crimping automatic crimping press cm-105c 901-0001-0 -------------- -------------- applicator ap105-rp34l-sc1-212 901-2043-4 rp34l-sc1-212(01) 18 to 22 awg cable crimping tool rp34-tc-01 150-0074-1 -------------- 4 extraction tool rp6-sc-tp 150-0039-0 -------------- -------------- assembly procedure (3 position plug) straight plug s-insulation p case 5.3 (mating section) (round hole) 8 2 +0.5 0 2 1 cord tube (b) cord tube (a) bushing metal fitting for clamping cable cord tube (b) cord tube (a) (tab) right angle 11 2 s-insulation p case metal fitting for clamping 2 1 cord tube bushing metal fitting for clamping s-insulation p case cable 13.7 2 +0.5 0 1. first pass the prepared cable through the bushing, and then crimp and terminate the contacts. 2. assemble the crimped and terminated contacts into the contact holes of the s-insulation p case. at this time, please make sure that the crimped contacts are securely engaged onto the contact holes of the s-insulation p case by lightly pulling the cable. if you nd an erroneous wiring, insert the extractor (rp6-sc-tp) from the mating side to pull out the contact from the termination side, and then re- assemble. 3. crimp the metal tting for clamping with the applicable tool (rp34- tc-01). 4. align and assemble the protrusion of the s-insulation p case to the round hole of the cord tube (b). 5. attach the mating section of the metal fitting for clamping to the recess of the cord tube (b), and then assemble the bushing and metal tting for clamping onto the cord tube (b). 6. assemble the cord tube (a) onto the cord tube (b). at this time, please make sure that the four tabs of the cord tube (b) rest on the angled hole of the cord tube (a). 1. right-angled plugs can be assembled in the same manner as the straight plugs. 8 rp34l series small plastic connectors for ac adapters precautions 1. to prevent damage to the connector after mounting, make sure that it is supported with a panel or another substrate. this will prevent any type of excessive load or force on the connector. for 2 position type, please support the external shell of th e receptacle. for 3 position type, please support the external shell of the plug. y see page 3 for details on recommended panel dimensions. 2. when mated together, do not apply a load of 30 n or more on the cable in the direction indicated by the arrows. please note that an excessive tensile stress may break the connectors. (external shell) panel plug receptacle receptacle panel <2 position type> <3 position type> 3. this product series uses silver plated contacts. silver reacts easily to exposure to sulfur gas so the below conditions may cause tarnishing. y~ dusty environments y~ area with a high concentration area of gases such as sulfur dioxide gas, hydrogen sulfide gas, nitrogen dioxide gas and so on. example; in close proximity to factory exhaust, automotive emissions, etc. y~ close to heaters, or in other areas marked by extreme temperature differences or high humidity. y~ close to rubber products includes rubber adhesives. the electrical connection is not affected by tarnishing on a silver surface due to the wiping effect of the contact pins. storage packing state; packed in original packing or equivalent container temperature -10 to +60? humidity 85% max (it is recommended that the product be stored in an area of normal level of temperature and humidity, and free of any temperature fluctuation) please use this products within 6 months of delivery. (after 6 month, please check the solderbility before use) ?torage?means long-term storage of the unused products in sealed packaging, prior to assembly to pcb. 9 rp34l series small plastic connectors for ac adapters memo : 10 rp34 series small plastic connectors for ac adapters memo : 11 rp34 series small plastic connectors for ac adapters 12 rp34 series small plastic connectors for ac adapters the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 07/2018. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? usa: hirose electric (u.s.a.), inc. san jose office 2841 junction ave, suite 200 san jose, ca. 95134 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. detroit office (automotive) 17197 n. laurel park drive, suite 253, livonia, mi 48152 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. boston office 300 brickstone square suite 201, andover, ma 01810 phone : +1-978-662-5255 usa: hirose electric (u.s.a.), inc. headquarters chicago office 2300 warrenville road, suite 150, downers grove, il 60515 phone : +1-630-282-6700 http://www.hirose.com/us/ china: hirose electric (china) co., ltd. shenzhen branch room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose.com/cn/ korea: hirose korea co.,ltd. 143, gongdan 1-daero, siheung-si, gyeonggi-do, 15084, korea phone : +82-31-496-7000 fax : +82-31-496-7100 http://www.hirose.co.kr/ germany: hirose electric europe b.v. nuremberg office neumeyerstrasse 22-26, 90411 nurnberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ germany: hirose electric europe b.v. hanover office bayernstr. 3, haus c 30855 langenhagen, germany phone : +49-511 97 82 61 30 fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ germany: hirose electric europe b.v. german branch schoenbergstr. 20, 73760 ostfildern phone : +49-711-456002-1 fax : +49-711-456002-299 http://www.hirose.com/eu/ france: hirose electric europe b.v. paris office 130 avenue joseph kessel, bat e, 78960 voisins le bretonneux, france phone : +33-1-85764886 fax : +33-1-85764823 http://www.hirose.com/eu/ the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hirose.com/eu/ united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 http://www.hirose.com/eu/ china: hirose electric (china) co., ltd. (shanghai, headquarters) 18, enterprise center tower 2, 209# gong he road, jing?an district, shanghai, china 200070 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose.com/cn/ china: hirose electric (china) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose.com/cn/ taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7355 http://www.hirose.com/tw/ hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose.com/hk/ india: hirose electric singapore pte. ltd. delhi liaison office office no.552, regus-green bo ulevard, level5, tower c, sec62, plot b-9a, block b, noida, 201301, uttar pradesh, india phone : +91-12-660-8018 fax : +91-120-4804949 http://www.hirose.com/sg/ singapore: hirose electric singapore pte. ltd. 03, anson road, #20-01, springleaf tower, singapore 079909 phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose.com/sg/ india: hirose electric singapore pte. ltd. bangalore liaison office unit no-403, 4th floor, no-84, barton centre, mahatma gandhi (mg) road, bangalore 560 001, karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose.com/sg/ malaysia: penang representative office 73-3-1, ideal@the one, jalan mahsuri, bayan lepas penang, 11950, malaysia phone : +604-648-5536 http://www.hirose.com/sg/ thailand: bangkok office (representative office) unit 4703, 47th fl., 1 empire tower, south sathorn road, yannawa, sathorn, bangkok 10120 thailand phone : +66-2-686-1255 fax : +66-2-686-3433 http://www.hirose.com/sg/

▲Up To Search▲

Price & Availability of HT-102RP34L-SC1-212

	To Download HT-102RP34L-SC1-212 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .