design and specifications are each subject to change without notice. ask factory for the current technical specifications before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. conductive polymer aluminum solid capacitors + C f d l p r c w h 0.2 max. lot. no. polarity marking (?) series r. capacitance r. voltage surface mount type series : svpe super low esr (8 m to 18 m ) large capacitance (1200 f max.) rohs compliance, halogen free size code b6 c6 c10 f12 category temperature range C55 c to +105 c rated voltage range 2.5 v.dc to 6.3 v.dc 2.5 v.dc to 10 v.dc 2 v.dc to 16 v.dc 16 v.dc rated capacitance range 150 f to 390 f 220 f to 390 f 180 f to 1200 f 470 f capacitance tolerance 20 % (120 hz / + 20 c) leakage current please see the attached characteristics list dissipation factor (tan ) please see the attached characteristics list endurance +105 c, 2000 h, rated voltage applied capacitance change within 20 % of the initial value tan < 150 % of the initial limit dc leakage current within the initial limit damp heat (steady state) +60 c, 90 % to 95 %, 1000 h, no-applied voltage capacitance change within 20 % of the initial value tan < 150 % of the initial limit dc leakage current within the initial limit (after voltage processing) marking unit : mm size code f d0.5 l +0.1 w0.2 h0.2 c0.2 r p0.2 b6 5.0 5.9 5.3 5.3 6.0 0.6 to 0.8 1.4 c6 6.3 5.9 6.6 6.6 7.3 0.6 to 0.8 2.1 c10 6.3 9.9 6.6 6.6 7.3 0.6 to 0.8 2.1 f12 10.0 12.6 10.3 10.3 11.0 0.8 to 1.1 4.6 ?0.4 series rated voltage (v.dc) rated capacitance (f) case size (mm) size code specifications standard (reel size : f 380) f d l ripple ? 1 current (mar.m.s.) esr tan ? 2 lc ? 3 (a) part number min. packaging q'ty (pcs) 100 khz/20 c (m max.) 300 khz/20 c (m max.) svpe 2 1200 6.3 9.9 c10 5230 8 8 0.12 500 2svpe1200m 500 2.5 270 5.0 5.9 b6 3860 10 9 0.12 500 2r5svpe270m 1500 330 5.0 5.9 3150 15 13 0.12 500 2r5svpe330m 1500 5.0 5.9 3860 10 9 0.12 500 2r5svpe330my 1500 390 5.0 5.9 3860 10 9 0.12 700 2R5SVPE390Mx 1500 6.3 5.9 c6 3900 10 9 0.12 500 2R5SVPE390M 1000 6.3 150 5.0 5.9 b6 3520 12 10 0.12 500 6svpe150m 1500 180 5.0 5.9 3150 15 13 0.12 500 6svpe180m 1500 220 5.0 5.9 3150 15 13 0.12 500 6svpe220mw 1500 6.3 5.9 c6 3900 10 9 0.12 500 6svpe220m 1000 10 220 6.3 5.9 2700 20 18 0.12 500 10svpe220m 1000 16 180 6.3 9.9 c10 4460 11 10 0.12 576 16svpe180m 500 470 10.0 12.6 f12 6100 10 9 0.12 1504 16svpe470m 400 ? 1 ripple current (100 khz/ +105 c ), ? 2 tan (120 hz/+20 c) ? 3 after 2 minutes please refer to each page in this catarog for reflow conditions and taping specifications. frequency 120 hz < f < 1 khz 1 khz < f < 10 khz 10 khz < f < 100 khz 100 khz < f < 500 khz coef? cient 0.05 0.3 0.7 1 dimensions (not to scale) features speci cations frequency correction factor for ripple current ? externals of ? gure are the reference. characteristics list nov. 2015 01 downloaded from: http:///
if you want to use our products described in this onlin e catalog for applications requiring special qualities or reliability, or for applications where the failure or malfunction of the products may directly jeopardize human life or potentially caus e personal injury (e.g. aircraft and aerospace equipment, traffic and transportat ion equipment, combustion equipment, medical equipment, accident prevention, anti-crime eq uipment, and/or safety equipment), it is necessary to verify whether the specificatio ns of our products fit to such applications. please ensure that you will ask and check with our inquiry desk as to whether the specifications of our products fit to such applications use before you use our products. the quality and performance of our products as described in this online catalog only apply to our products when used in isolation. therefore, please en sure you evaluate and verify our products under the specific circumstances in which our pr oducts are assembled in your own products and in which our products will actually be used. if you use our products in equipment that requires a h igh degree of reliability, regardless of the application, it is recommended that you set up protectio n circuits and redundancy circuits in order to ensure safety of your equipment. the products and product specifications described in this online catalog are subject to change for improvement without prior notice. therefore, pleas e be sure to request and confirm the latest product specifications which explain the specifications of our products in detail, before you finalize the design of your applications, pu rchase, or use our products. the technical information in this online catalog provides example s of our products' typical operations and application circuits. we do not guarantee the non-infringement of third party's intellectual property rights and we do not grant any license, right, or interest in our intellectual property. if any of our products, product specifications and/or technical information in this online catalog is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially with regard to security and ex port control, shall be observed. the switchover date for compliance with the rohs directive /reach regulations varies depending on the part number or series of our products. when you use the inventory of our products for which it is unc lear whether those products are compliant with the rohs directive/reach regulation, please se lect "sales inquiry" in the website inquiry form and contact us. we do not take any responsibility for the use of our products outside the scope of the specifications, descriptions, guidelines and precautions described in this online catalog. guidelines and precautions regarding the described in this online catalog. downloaded from: http:///
|
