design and specifications are each subject to change without notice. ask factory for the current technical specifications before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. conductive polymer tantalum solid capacitors r.cap. code r. voltage code year week polarity marking(+) w1 h l w s s polarity marking(+) r.cap. code r. voltage code year week w1 h l w s s surface mount type series : tph small size, low pro? le (l3.2 w 1.6 h 0.9 mm) face down terminal type rohs compliance, halogen free size code a09 a14 category temperature range C55 c to +105 c / C55 c to +85 c (rated temp. +85 c) rated voltage range 2.5 v.dc to 10 v.dc 2.5 v.dc to 6.3 v.dc category voltage range 2.5 v.dc to 10 v.dc 2.5 v.dc to 6.3 v.dc rated capacitance range 33 f to 100 f 100 f to 220 f capacitance tolerance 20 % (120 hz / + 20 c) leakage current please see the attached characteristics list dissipation factor (tan d ) please see the attached characteristics list surge voltage (v.dc) rated voltage 1.15 endurance +105 c, 1000 h rated voltage applied ? rated temp, +85 c products : +85 c, 1000 h, rated voltage applied capacitance change within 20 % of the initial value tan d < 1.5 times of the initial limit dc leakage current within the initial limit damp heat (steady state) +60 c, 90 % to 95 %, 500 h, no-applied voltage capacitance change within +50 %, ?20 % of the initial value (etph220mabc) within +40 %, ?20 % of the initial value (except for above model) tan d < 1.5 times of the initial limit dc leakage current < 3 times of the initial limit r. voltage (v.dc) 2.5 4.0 6.3 10.0 code eg j a r. cap. (f) 33 47 68 100 150 220 code n7 s7 w7 a8 e8 j8 series rated voltage (v.dc) rated temp. (c) category voltage (v.dc) category temp. (c) rated capacitance (f) case size (mm) size code specifications standard floor life lwh ripple ? 1 current (mar.m.s.) esr ? 2 (m max.) tan d ? 3 lc ? 4 (a) part number min. packaging q'ty (pcs) re? ow temp < 260c re? ow temp < 250c tph 2.5 105 2.5 105 100 3.2 1.6 0.9 a09 510 150 0.10 25.0 etph100mha 3000 33 85 2.5 85 220 3.2 1.6 1.4 a14 740 70 0.10 110.0 etph220mabc 2500 4 105 4.0 105 68 3.2 1.6 0.9 a09 510 150 0.10 27.2 4TPH68MHA 3000 85 4.0 85 150 3.2 1.6 1.4 a14 740 70 0.10 120.0 4tph150mabc 2500 6.3 105 6.3 105 47 3.2 1.6 0.9 a09 510 150 0.10 29.6 6tph47mha 3000 85 6.3 85 100 3.2 1.6 0.9 670 100 0.10 63.0 6tph100maea 3000 85 6.3 85 100 3.2 1.6 1.4 a14 740 70 0.10 126.0 6tph100mabc 2500 10 85 10.0 85 33 3.2 1.6 0.9 a09 510 150 0.10 33.0 atph33maha 3000 ? 1 ripple current (100 khz/ +45 c ), ? 2 esr (100 khz/+20 c) ? 3 tan d (120 hz/+20 c) ? 4 after 5 minutes please refer to each page in this catarog for reflow conditions and taping specifications. unit : mm a09/a14 size a09/a14 size a09 size (6tph100maea) a09 size (6tph100maea) size code l0.2 w0.2 h0.1 s0.2 w10.1 a09 3.2 1.6 0.9 0.8 1.2 a14 3.2 1.6 1.4 0.8 1.2 ? externals of ? gure are the reference. speci cations features characteristics list marking dimensions (not to scale) jun. 2018 02 downloaded from: http:///
if you want to use our products described in this onlin e catalog for applications requiring special qualities or reliability, or for applications where the failure or malfunction of the products may directly jeopardize human life or potentially caus e personal injury (e.g. aircraft and aerospace equipment, traffic and transportat ion equipment, combustion equipment, medical equipment, accident prevention, anti-crime eq uipment, and/or safety equipment), it is necessary to verify whether the specificatio ns of our products fit to such applications. please ensure that you will ask and check with our inquiry desk as to whether the specifications of our products fit to such applications use before you use our products. the quality and performance of our products as described in this online catalog only apply to our products when used in isolation. therefore, please en sure you evaluate and verify our products under the specific circumstances in which our pr oducts are assembled in your own products and in which our products will actually be used. if you use our products in equipment that requires a h igh degree of reliability, regardless of the application, it is recommended that you set up protectio n circuits and redundancy circuits in order to ensure safety of your equipment. the products and product specifications described in this online catalog are subject to change for improvement without prior notice. therefore, pleas e be sure to request and confirm the latest product specifications which explain the specifications of our products in detail, before you finalize the design of your applications, pu rchase, or use our products. the technical information in this online catalog provides example s of our products' typical operations and application circuits. we do not guarantee the non-infringement of third party's intellectual property rights and we do not grant any license, right, or interest in our intellectual property. if any of our products, product specifications and/or technical information in this online catalog is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially with regard to security and ex port control, shall be observed. the switchover date for compliance with the rohs directive /reach regulations varies depending on the part number or series of our products. when you use the inventory of our products for which it is unc lear whether those products are compliant with the rohs directive/reach regulation, please se lect "sales inquiry" in the website inquiry form and contact us. we do not take any responsibility for the use of our products outside the scope of the specifications, descriptions, guidelines and precautions described in this online catalog. guidelines and precautions regarding the described in this online catalog. downloaded from: http:///
|
