| |
|
 |
MAXIM - Dallas Semiconductor
|
| Part No. |
MAX1778EVKIT
|
| OCR Text |
...he step-up switching circuit is configured for a +8V output that provides up to 250mA of current from a +3.0V supply. The EV kit can be powered from a +2.7V to +5.5V supply. The positive charge-pump circuit is configured for a +20V output t... |
| Description |
Evaluation Kit for the MAX1778/MAX1880/MAX1881/MAX1882
From old datasheet system
|
| File Size |
196.10K /
6 Page |
 View
it Online |
Download Datasheet
|
| |
|
|
MAXIM - Dallas Semiconductor
|
| Part No. |
MAX1813EVKIT
|
| OCR Text |
...ed due to switch bounce. kit is configured for operation in the impedance mode with jumpers JUB0-JUB4 set for 1.30V output (Table 1). While in the impedance mode, changing jumpers JUB0-JUB4 does not immediately change the output voltage set... |
| Description |
Evaluation Kit for the MAX1813
From old datasheet system
|
| File Size |
366.80K /
11 Page |
View
it Online |
Download Datasheet |
| |
|
|
MAXIM - Dallas Semiconductor
|
| Part No. |
MAX2640EVKIT-MAX2641EVKIT MAX2641EVKIT MAX2640EVKIT
|
| OCR Text |
...
The MAX2640 EV kit is factory-configured for operation at 900MHz and is easily configured to operate from 400MHz to 1500MHz. Use device parameters listed in Tables 1 and 3 of the MAX2640/MAX2641 data sheet to determine the proper input an... |
| Description |
Evaluation Kits for the MAX2640/MAX2641
From old datasheet system
|
| File Size |
471.62K /
4 Page |
View
it Online |
Download Datasheet |
| |
|
|
MAXIM - Dallas Semiconductor
|
| Part No. |
MAX3762EVKIT
|
| OCR Text |
...n The MAX3762 EV kit is shipped configured to connect to a 50 terminated oscilloscope. Each output is AC coupled and has a 330 resistor to ground which provides bias current. PECL Outputs To drive a circuit that requires a PECL input, remov... |
| Description |
Evaluation Kit for the MAX3762
From old datasheet system
|
| File Size |
79.01K /
6 Page |
View
it Online |
Download Datasheet |
|
Price and Availability
|
