jumper pdf Datasheet P2 Full Text Search --- IC-ON-LINE


	Part Number	Hot Search : ZSD100N8 CY3674 4756A ISL84543 1N4741 00C12 2SC4061K 1N4741
	Product Description
	Full Text Search

jumper Datasheet PDF File

For jumper Found Datasheets File :: 4671 Search Time::1.719ms
Page :: | 1 | <2> | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 |

				Maxim Integrated Products, Inc.
Part No.	MAX98502EVKIT
OCR Text	...selectable with the gain input. jumper ju1 controls the amplifiers gain select input. see table 1 for ju1 con - figuration. shutdown inputs the ic features two active-low shutdown inputs ( sdspk and sdbst ). jumper ju2 enables or disabl...
Description	Evaluation Kit for the MAX98502
File Size	515.23K / 7 Page	View it Online	Download Datasheet

				Samsung semiconductor
Part No.	RC3216J680CS
OCR Text	...et "r" as decimal point "000" : jumper(0 ? ) ex) 3r7 : 3.7 = 3.7 ? / 88r7 : 88.7 = 88.7 ? packing code 7" reel packaging b. samsung reliablility test and judgement condition resistor jumper resistor jumper direct current within the regul...
Description	Supplier Samsung electro-mechanics
File Size	72.83K / 2 Page	View it Online	Download Datasheet

				SIPEX[Sipex Corporation]
Part No.	SP6650EB SP6650UEB SP6650EU
OCR Text	...n "shutdown" until pin 2 of the jumper J2 is applied to the GND. 2) I LIM Programming Connect pin 4 of the SP6650 to VIN for 0.8 A peak Inductor current limit (pins 2,3 of the jumper J2). Connect pin 4 of the SP6650 to GND for 0.35 A pea...
Description	Evaluation Board Manual
File Size	58.35K / 6 Page	View it Online	Download Datasheet

				ASIX Electronics Corporation ASIX Electronics Corpor...
Part No.	AX88760
OCR Text	.................. 11 ? demo board jumper setting table figure 6. ? ............................................................................................ 12 ? windows srom programming tool figure 7. ? ....................................
Description	AX88760 Product Introduction
File Size	450.67K / 18 Page	View it Online	Download Datasheet

				SiGe Semiconductor, Inc. SiGe Semiconductor, Inc...
Part No.	AATIAN22
OCR Text	...2. enable uut by connecting the jumper to the on position. 3. turn on the input power supply and set to desired input voltage based on the dc voltmeter. 4. vary the output load from 0 to 400ma and vary the input voltage from 2.7v to 5.5v w...
Description	3MHz Fast Transient 400mA Step-Down Converter
File Size	810.94K / 11 Page	View it Online	Download Datasheet

				Semtech, Corp. SEMTECH[Semtech Corporation]
Part No.	SC1437 SC1437ISK-B42TR SC1437ISK-B45TR SC1437ISK-B47TR SC1437ISK-H42TR SC1437ISK-H45TR SC1437ISK-H47TR SC1437ISK-L42TR SC1437ISK-L45TR SC1437ISK-L47TR
OCR Text	...0mS or 80mS by application of a jumper JP2, JP3 or leaving the jumper off, respectively. Configuration of timing delays are shown in Table 1. Once the trip delay is set to the required value the SC1437 will monitor the charger voltage. If t...
Description	Tantalum Molded Capacitor; Capacitance: 4.7uF; Voltage: 35V; Case Size: 3.2x6.0 mm; Packaging: Tape & Reel 精密电压检测器，具有可编程触发电压 Precision Voltage Detector With Programmable Trigger Voltage & Timer Delay
File Size	91.98K / 8 Page	View it Online	Download Datasheet

				SiGe Semiconductor, Inc. SiGe Semiconductor, Inc...
Part No.	AATIAN16
OCR Text	... the supply, set the fb setting jumper (jp2) to choose the vout voltage position (1.2v, 1.5v, 1.8v or 2.5v) and set the en jumper (jp1) from off state to on. 4. vary the load from 0 to 600ma and the input voltage from 2.5v to 5.5v while mon...
Description	600mA Step-Down Converter
File Size	374.49K / 7 Page	View it Online	Download Datasheet

				Maxim Integrated Products
Part No.	MAX1280EVC16 MAX1280EVKIT
OCR Text	...ing the hardware shutdown, move jumper JU2 to the 2-3 position. Sense the supply current by measuring the voltage across resistors R9 and R10. Table 1. jumper Functions jumper POSITION Closed* JU1 FUNCTION COM is connected to GND. COM i...
Description	MAX1280 Evaluation System
File Size	151.83K / 9 Page	View it Online	Download Datasheet

				MAXIM - Dallas Semiconductor MAXIM[Maxim Integrated Products]
Part No.	MAX1709EVKIT
OCR Text	... of a small inductor. A movable jumper on the EV kit selects either a 3.3V or 5V output voltage. Additional pads on the board accommodate the resistors for output adjustment. This EV kit uses surface-mount components and is fully assembled ...
Description	Evaluation Kit for the MAX1709 MAX1709 Evaluation Kit
File Size	131.53K / 4 Page	View it Online	Download Datasheet

				SiGe Semiconductor, Inc. SiGe Semiconductor, Inc...
Part No.	AATIAN107
OCR Text	...5v) to the board by placing the jumper, j1 on the left (connects dc+ power to ahk1421). 2. connect the dc+ power to the microcontroller vdd by using the jumper v_mcu. 3. connect the en/set jumper to connect the microcontroller gpios to t...
Description	S2Cwire Controlled, Serial LED Boost Driver
File Size	909.09K / 8 Page	View it Online	Download Datasheet

For jumper Found Datasheets File :: 4671 Search Time::1.719ms
Page :: | 1 | <2> | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 |