|
|
|
NEC Corp.
|
Part No. |
UPD765B
|
OCR Text |
...ives a step pulse. if dir is 0, seeks are performed in the outward direction; dir is 1, seeks are performed in the inward direction. rwlseek (read/write/seek) the rw/seek output specifies the read/write mode when low, and the seek mode wh... |
Description |
Single/Double Density Floppy-Disk Controller
|
File Size |
345.72K /
17 Page |
View
it Online |
Download Datasheet |
|
|
|
DDC
|
Part No. |
SDC-361 SDC362 SDC361
|
OCR Text |
... error processor. The converter seeks a null as it would for a single speed S/D. As null is approached (to within 2.5 nominally) the coarse CT output drops below a preset threshold and the crossover detector then switches the fine CT error ... |
Description |
(SDC-361 / SDC-362) 16-Bit 2 Speed Synchro to Digital and Resolver to Digital Converter (SDC361 / SDC362) 16-Bit 2 Speed Synchro to Digital and Resolver to Digital Converter
|
File Size |
133.16K /
6 Page |
View
it Online |
Download Datasheet |
|
|
|
NEC[NEC]
|
Part No. |
UPD765B UPD765A D765
|
OCR Text |
...ives a step pulse. If DIR is 0, seeks are performed in the outward direction; DIR is 1, seeks are performed in the inward direction.
SIDE (Head Select)
Head 1 is selected when the SIDE output is 1 (high), head 0 is selected when SIDE is... |
Description |
Single/Double Density Floppy-Disk Controller
|
File Size |
340.63K /
17 Page |
View
it Online |
Download Datasheet |
|
|
|
Cypress
|
Part No. |
ICD2053B
|
OCR Text |
...s fixed frequency while the VCO seeks its new programmed value. The procedure for programming the ICD2053B to an initial or new frequency is as follows: 1. Load the Control register to enable MUXREF and enable loading of the Program registe... |
Description |
Programmable Clock Generator From old datasheet system
|
File Size |
112.67K /
8 Page |
View
it Online |
Download Datasheet |
|
|
|
Cypress
|
Part No. |
ICD2051
|
OCR Text |
... while the programmed frequency seeks its new value. When programming the ICD2051, use the MUXREF inputs in the following manner: 1. Set MUXREF(X) to a LOW state. This will set the output to the reference frequency. The transition is guaran... |
Description |
Dual Programmable Clock Generator From old datasheet system
|
File Size |
111.07K /
8 Page |
View
it Online |
Download Datasheet |
|
|
|
SUTEX[Supertex, Inc]
|
Part No. |
HV9925 HV9925SG-G
|
OCR Text |
..., the internal linear regulator seeks to maintain a voltage of 7.5VDC at the VDD pin. Until this voltage exceeds the internally programmed under-voltage threshold, no output switching occurs. When the threshold is exceeded, the integrated h... |
Description |
Programmable-Current LED Lamp Driver IC with PWM Dimming
|
File Size |
1,287.43K /
10 Page |
View
it Online |
Download Datasheet |
|
Price and Availability
|